MFJ MFJ-1284W, MFJ-1284WD User Manual

A TNC Control Program

Table of Contents

1. OVERVIEW................................................................................................................................................................................... 2

2. INSTALLING MFJCOM FOR WINDOWS .............................................................................................................................. 3

3. RUNNING MFJCOM FOR WINDOWS .................................................................................................................................... 4

UNNING FROM PROGRAM MANAGER (WINDOWS 3.1) .................................................................................................................. 4

3.1 R

UNNING FROM FILE MANAGER( WINDOWS 3.1) OR EXPLORER (WINDOWS95)............................................................................ 4

3.2 R

F THIS IS THE FIRST TIME YOU’VE RUN MFJCOM FOR WINDOWS... ............................................................................................. 4

3.3 I

OFTWARE CONTROL OF THE TNC: WHAT TO DO IF YOUR TNC DOESN'T COOPERATE! ................................................................. 4

3.4 S

ERIAL (COM) PORTS: WHAT TO DO IF YOUR PC AND TNC DON’T COMMUNICATE! ................................................................... 5

3.5 S

HE MFJCOM FOR WINDOWS MAIN WINDOW ............................................................................................................................... 6

3.6 T

3.6.1 General Description................................................................................................................................................................ 6

3.6.2 Upper Tool Bar Description ................................................................................................................................................... 7

3.6.3 Lower Tool Bar Description ................................................................................................................................................... 8

3.6.4 Menu Bar Description........................................................................................................................................................... 10

3.6.5 Hiding/Showing Toolbars ..................................................................................................................................................... 10

3.6.6 Saving Screen Size ................................................................................................................................................................ 10

ETTING UP MFJCOM FOR WINDOWS: BASIC INFORMATION ....................................................................................................... 10

3.7 S

UNCTION KEYS: F1, F2 AND F3.................................................................................................................................................. 12

3.8 F

4. SELECTING MODES OF OPERATION................................................................................................................................. 14

5. OPERATING ............................................................................................................................................................................... 15

ACTOR OPERATION ..................................................................................................................................................................... 15

5.1 P

5.1.1 Pactor Options...................................................................................................................................................................... 15

5.1.2 Pactor QSO's ........................................................................................................................................................................ 16

5.1.2.1 Pactor FEC Mode Operation................................................................................................................................................................17

5.1.2.2 Pactor ARQ Mode Operation ..............................................................................................................................................................17

5.1.3 Calling CQ in Pactor ............................................................................................................................................................ 17

5.1.3.1 To call CQ a single time, or to Edit the CQ message: ......................................................................................................................... 17

5.1.3.2 To Call CQ automatically more than once: .........................................................................................................................................18

5.2 VHF AND HF PACKET OPERATION............................................................................................................................................... 19

5.2.1 VHF and HF Packet Options................................................................................................................................................ 19

5.2.2 VHF and HF Packet QSO’s.................................................................................................................................................. 21

5.2.3 YAPP File Transfers ............................................................................................................................................................ 24

5.2.3.1 Starting YAPP ..................................................................................................................................................................................... 24

5.2.3.2 Sending YAPP Files ............................................................................................................................................................................ 25

5.2.3.3 Receiving YAPP Files ......................................................................................................................................................................... 25

5.2.4 Packet Images for Windows................................................................................................................................................. 25

5.2.4.1 General ................................................................................................................................................................................................25

5.2.4.2 Packet Images is not

5.2.4.3 Image Format....................................................................................................................................................................................... 26

5.2.4.4 Compressed and Non-compressed images........................................................................................................................................... 26

5.2.4.5 How to Use Packet Images.................................................................................................................................................................. 26

5.2.4.5.1 Sending Packet Images................................................................................................................................................................. 26

5.2.4.5.2 Receiving Packet Images.............................................................................................................................................................. 27

5.2.4.5.3 How to Receive and Display Pictures from Users of Other Software Packages .......................................................................... 28

the same as Packet Pix in DOS MFJCom .......................................................................................................... 26

6. TIME SAVING TIPS .................................................................................................................................................................. 29

ENDING AN IDENTIFICATION MESSAGE ....................................................................................................................................... 29

6.1 S

ENDING THE OTHER STATION'S CALLSIGN ................................................................................................................................... 29

6.2 S

ENDING YOUR CALLSIGN............................................................................................................................................................ 29

6.3 S

SING TEXT ("BRAG") FILES........................................................................................................................................................ 30

6.4 U

SING ASCII FILES ...................................................................................................................................................................... 32

6.5 U

7. PRINTING ................................................................................................................................................................................... 33

Table of Contents

8. CAPTURE TO DISK................................................................................................................................................................... 34

9. CONTROLLING MORE THAN ONE TNC AT THE SAME TIME .................................................................................... 36

10. ACKNOWLEDGMENTS ......................................................................................................................................................... 37

Overview

Reproduction or use of editorial or pictorial content of this software product and the documentation without the expressed written permission from MFJ Enterprises, Inc. is prohibited.

While every precaution has been taken in the preparation of this instruction manual, the author and publisher assume no responsibility for error or omissions.

Neither is any liability assumed for damages resulting from the use of the software or the information contained herein.

1. Overview

MFJCom for Windows is a software tool that simplifies the use of MFJ TNC. Instead of requiring

you to memorize a large number of commands, all you need to do is "point and click" on easy-touse icons and buttons on the screen. MFJCom for Windows does all the rest for you. If you need to enter more information, MFJCom for Windows displays simple "forms" for easy information entry.

MFJCom for Windows can also be used for some other TNC-2 TNCs made by other companies.

MFJCom for Windows lets you control your TNC in the way that's easiest for you: "point and

click", or keystrokes. There's no need to use a mouse if you don't want to, but you can take full advantage of the Windows interface if you want. You can choose to have all controls displayed, ready for you to use, or you can have a clean, simple, uncluttered display if you want.

MFJCom for Windows supports the following modes on your MFJ TNC:

Packet mailbox mode can be used by directly entering TNC commands if you wish.

Overview

• Packet (HF and VHF)

• Pactor (FEC and ARQ modes) on the MFJ 1276 or MFJ 1278 series.

Installing MFJCom for Windows

2. Installing MFJCom for Windows

Installation is virtually the same in Windows 3.1 and Windows 95.

To install MFJCom for Windows, simply do the following:

1. Put the MFJCom for Windows “Setup” diskette in a floppy drive.

2. If you are using Windows 3.1 window is visible.

• select "File" from the menu bar at the top of the window

• select "Run" from the File menu

• enter: a:setup (or b:setup if you put the diskette in drive b:)

• press the "Enter" key

If you are using Windows 95

• select “Run” from the Start menu

• enter: a:setup (or b:setup if you put the diskette in drive b:)

• press the "Enter" key

3. The "Setup" program will run. Simply follow the instructions on the screen. You can quit at any time while Setup is running if you wish.

MFJCom for Windows shares some files with other Windows programs. When you are running the Setup program, you might get messages asking you if you want to replace a file on your computer with one from MFJCom for Windows. You should normally answer NO because MFJCom for Windows can almost always use the file you already have, but other programs on your computer might not be able to use MFJCom’s.

, click on the “Start” button at the lower left of your screen.

Note: you must run

Setup from

Windows. You can't

run it from DOS

, make sure either the Program Manager or File Manager

. This is

Running MFJCom for Windows

3. Running MFJCom for Windows

In Windows 3.1, you can run MFJCom for Windows from Program Manager (the most common way), or from File Manager.

In Windows 95, you can use Explorer, the Start menu, or drag the MFJCom for Windows icon (as a shortcut) to the desktop.

The following sections tell you how to run MFJCom for Windows.

3.1 Running From Program Manager (Windows 3.1)

Double-click the MFJCom for Windows Icon from the MFJCom for Windows program group. (Note that you can move the MFJCom for Windows icon to another group if you wish. Consult your Windows manual for more information.)

3.2 Running From File Manager( Windows 3.1) or Explorer (Windows95)

Select the directory containing MFJCom for Windows (this is usually C:\MFJWIN, but you may have specified a different directory when you installed MFJCom for Windows). Double-click "MFJWIN.EXE".

3.3 If This Is The First Time You’ve Run MFJCom for Windows...

If this is the first time you’ve run this program, make sure that you have the “Setup” floppy

disk in drive a: or drive b: of your PC (this is the floppy disk you used to install MFJCom for

Windows). Make sure your floppy is not write protected.

When you run MFJCom for Windows for the first time, you will see a screen asking you to enter your call sign. This is very important because many operating modes require your call sign in order to operate correctly. Your call sign will be copied onto the “Setup” floppy disk.

If you do not have your “Setup” floppy disk in your PC, you will not be able to continue.

You only need to have your “Setup” floppy disk in your PC the first Windows. After that, you will not need to have it in your PC.

time you run MFJCom for

3.4 Software Control of the TNC: What to do if your TNC doesn't cooperate!

The TNC uses "open loop" control. That means that when the TNC receives a command (from MFJCom for Windows, or from you), MFJCom for Windows has no way of knowing if the TNC actually responded correctly control command directly from the keyboard (you could have gone so far as changing modes!).

If you find that MFJCom for Windows does not respond to your commands, it may have gotten "out of sync" with the TNC. This does not happen often, but it is possible. If it does happen, you should:

-enter "CONTROL-C" from the keyboard

-enter the "ENTER" key

-select the desired mode from the Mode menu in the menu bar

. It also means that MFJCom for Windows can't tell if you sent a TNC

There a several ways this could happen. For example, you may have an intermittent serial cable connection

between your PC and TNC. Or, you may have turned the TNC off and on while MFJCom for Windows is operating.

Running MFJCom for Windows

at the top of the window

If that doesn’t work, enter the Command Key (normally F3, but may be F1 depending on what you specified in the Setup Options) and repeat the above steps.

This normally restores control to MFJCom for Windows.

3.5 Serial (COM) Ports: What to do if your PC and TNC Don’t Communicate!

When you first start up MFJCom for Windows, you might see this symbol at the bottom of your screen:

Click on the button to get advice on possible ways to resolve your problem.

99% of the time, communications problems in Windows are due to conflicts between devices that use serial ports (your mouse, your modem, your serial port to your TNC, etc.). Even though these devices are connected to different ports, they can still ‘conflict’.

If you are using “standard” IRQ (interrupt) settings on your serial port --most of us do--, check the following:

If your TNC uses: then your mouse or

modem should not use:

COM1 COM3 COM2 COM4 COM3 COM1 COM4 COM2

This table is based on the fact that COM1 and COM3 normally share IRQ 4, and COM2 and COM4 normally share IRQ3.

This sometimes can be restricting if you have more than two serial ports in use. One way around this is to setup a serial port with a non-standard IRQ. That usually requires changing a jumper on the serial card and setting some parameters in the “ports” section in the Windows Control Panel. If you do this, read your serial port and Windows manual very carefully. Take care not to create other IRQ conflicts with devices like your sound card or printer port.

Running MFJCom for Windows

3.6 The MFJCom for Windows Main Window

3.6.1 General Description

When you run MFJCom for Windows, you will see the "main window". It looks much like this:

Because you are using Windows, you will be able to switch to other Windows programs, re-size the MFJCom for Windows window, shrink the MFJCom for Windows window to an icon, and do anything else you can do in Windows.

The MFJCom for Windows window has several important parts. They are:

• the "Data From TNC" subwindow

This window show the data received from you TNC. That data includes:

• information received "off the air"

• command responses from the TNC (i.e. what the TNC sends back in response to

commands sent to it by MFJCom for Windows)

The Data From TNC window stores the last 300 lines (approximately) of data received. You can scroll back by clicking on the scroll bar at the right side of the window. When new data is received, the Data From TNC window scrolls back to the last line. You can prevent this by clicking on the "Pause Screen" button on the lower left of the MFJCom for Windows window (see "Lower Tool Bar"). Data from the TNC will not cause scrolling when the Pause Screen button is checked. Note: MFJCom for Windows will only store approximately the last 5000 characters received from the TNC when the Pause Screen button is checked.

Running MFJCom for Windows

• the "Keyboard Input" subwindow.

This window echoes your keystrokes, and keeps a record of what you entered. It also echoes any data sent when calling CQ automatically, or when text ("brag") or ASCII files are sent.

• the "Upper Tool Bar"

The Upper Tool Bar is located just above the Data From TNC window. You mostly use it to select operating modes, establish and break links (Pactor, Packet, Amtor), manage text "brag" files, and for printing and capture.

• the "Lower Tool Bar"

The Lower Tool Bar is located just below the Keyboard Input window. It has a variety of functions: control of the screen, time display, entry and sending of callsigns, as well as functions that depend on which mode you are in.

3.6.2 Upper Tool Bar Description

The functions of the Upper Tool Bar are described below:

• "Data Capture" Check Boxes:

These check boxes control capturing received data to the printer and/or the disk. Clicking on the appropriate box causes an 'x' to be displayed. That means the function is enabled. Clicking again on the box causes the function to be disabled, and the 'x' will disappear.

• Operating Mode Buttons:

The operating mode buttons are used to select the communication mode, and to enter the "setup" mode. If you are in “setup” mode, the mode buttons will appear like this:

Operation of the “Custom Mode” button is described elsewhere in this manual.

Running MFJCom for Windows

The mode you are currently using is shown in two ways:

• by the text in the main Title Bar at the top of the MFJCom for Windows window, and,

• by the "mode" buttons in the tool bar at the top of the MFJCom for Windows window.

You can easily change from one mode to another by clicking the mode buttons or by using menus. See Section 4.

• Connect / Disconnect Buttons

These are only displayed in Pactor, Packet and Amtor modes.

When you are not connected (linked) to another station, the "Connect" button is displayed. Click on this button to try to connect to another station. A menu will appear to prompt you for more information.

When you a connected, or attempting to connect, to another station, the "Disconnect" button will replace the Connect button on the toolbar. Click on the Disconnect button to disconnect ("drop") the connection or to abandon an attempted connection.

• Text "Brag file" Buttons

The 3 Text buttons are used to enter and send short files of text (up to 1500 characters) that you create using MFJCom for Windows built-in editor. Each mode (except Navtex and SSTV/Fax) has a different set of buttons. Graphics characters are supported in Packet and Pactor modes.

• Send File Button

The Send File button is used send text from a file that you created with Notepad or some similar editor Each mode (except Navtex and SSTV/Fax) has a text button. You can have as many ASCII files as you want. You would use this button for longer text files than you would with the Text “Brag” files. Note that ASCII text with this button are sent just as if you had entered it from the keyboard. No ‘file transfer protocol’ is used.

3.6.3 Lower Tool Bar Description

The functions of the Lower Tool Bar are described below.

• "Layout" button Click on this button to re-arrange the Keyboard Entry and Data from TNC windows. Each click will change to a different format: either overlapped, vertical tiled, or horizontal tiled (the default, startup, format). Click until you find the format that you prefer.

• "Clear" button Click on this button to clear the screen. MFJCom for Windows will ask you to confirm this just to make sure you don't clear the screen by accident.

• "Font/Color" button You can choose the colors and font for the Keyboard Input and Data from TNC subwindows by clicking the "font/color" button (alternately, you can use the "Screen" menu, and click on "color". MFJCom for Windows will show the following form:

Running MFJCom for Windows

Simply click your color choice for each window.

Click on “Change Font” to change the font. A menu will appear to let you choose a new font. Note: for best performance and to display ANSI graphics characters, you should choose the “Terminal” font.

Select OK to enable your choices, or Cancel if you do not wish to use your choices.

• "Pause Screen" check box

Click on this box to temporarily stop new data from being displayed in the Data From TNC window. An 'x' will appear in the box when the screen is paused. Click again to display all characters received while the screen was paused and all new characters (the 'x' will disappear). Use this function when you want to scroll through the Data From TNC window and don't want the display to bounce around with incoming data.

Note: MFJCom for Windows will only store approximately the last 5000 characters received from the TNC when the Pause Screen button is checked.

• Time Display

Local and UTC (GMT) times and dates are displayed.

• Call Sign Transmission

The "de (callsign)" button will send "de " followed by your callsign when clicked.

The "Enter Call" button will prompt you to enter a call in the button immediately to it’s right. You don't normally need to do this in Pactor or Packet modes, since MFJCom for Windows can automatically determine the call of the station you are connecting or connected to.

The callsign button will send the callsign that is displayed on it. If no callsign is displayed, nothing will be sent. If necessary, use the "Enter Call" button to enter and display a call sign.

• Send / Receive Control

Transmit, Receive, "Over" buttons

In some modes, a buttons will appear to alternated between transmitting and receiving

+ 28 hidden pages