Table of Contents:
MFJ-462B MultiReader™.....................................................................................................................2
Specifications ...........................................................................................................................2
Connections..............................................................................................................................2
Power ..........................................................................................................................2
Printer..........................................................................................................................2
Audio...........................................................................................................................2
Straight Key .................................................................................................................2
Jumpers .......................................................................................................................2
Basic Operation........................................................................................................................3
Menu Operation........................................................................................................................3
Main Menu ...............................................................................................................................4
Signal Setup .................................................................................................................4
Baud Rate Setup ..........................................................................................................5
Printer Setup................................................................................................................5
Ram Setup................................................................................................................... 5
Reverse Setup ..............................................................................................................6
Practice Key.................................................................................................................6
Radio Tuning............................................................................................................................6
CW.............................................................................................................................. 6
RTTY/ASCII/AMTOR FEC........................................................................................7
CW Abbreviations....................................................................................................................7
Technical Assistance.................................................................................................................7
MFJ-462B Schematic Diagram.................................................................................................8
MFJ-462B MultiReader
Specifications:
Modes:
Shifts:
Mark Frequency:
Baud Rates:
Printer:
MessageSaver™:
Code Practice:
Connections:
Power
MFJ-462B MultiReader
CW, RTTY, ASCII, AMTOR FEC
RTTY: 170 Hz, 425 Hz, 850 Hz
ASCII: 170 Hz
AMTOR FEC: 170 Hz
US RTTY 2125 Hz
European RTTY 1275 Hz
CW: Approximately 50 WPM max.
RTTY: 45, 50, 57, 75, 100
ASCII: 110
AMTOR FEC: 100
Must be EPSON or compatible
8000 characters volatile RAM
Straight key CW decoding
TM
NOTE: Reverse mode selectable for RTTY,
ASCII, and AMTOR
NOTE: US or European frequency jumper-
selected.
A 12 VDC 300 milliamp power supply should be used with the MFJ-462B. The POWER jack accepts a 2.1 mm
coaxial plug with the center conductor positive and the sleeve negative. An optional DC supply, the MFJ-1312B, is
available from MFJ. Connect your MFJ-1312B Power Adapter or compatible DC supply, coaxial line with shield
ground, into the POWER jack on the rear of the MFJ-462B.
Printer Port
A DB-25 connector is located on the MFJ-462B for use with an EPSON compatible printer. An optional DB-25 to
Centronics printer cable, the MFJ-5412, is available from MFJ.
Audio Input
There are two methods of feeding audio into the MFJ-462B Multi-Reader. The 3.5 mm mono jack, labeled
AUDIO INPUT, can be used with a cable, using the tip as audio and shield as ground. An optional 3.5mm audio
cable, the MFJ-5162, is available from MFJ. The 5-pin DIN jack can be used with a cable using pin 4 as audio
and pin 2 as ground. This connection scheme matches popular TNC connections so that you may use ready-made
TNC cables.
Hand Key
A hand key may be used with the MFJ-462B for CW code practice. Connect your hand key to the 3.5mm HAND
KEY jack on the rear, with the tip to the key and the shield to ground. To listen as you practice your code, place
the SPEAKER SELECT switch on the rear panel IN to the HANDKEY position. For normal operation, this
switch should be in the RADIO (OUT) position.
Jumpers
Jumpers J6, J7, and J8, located inside on the right side of the unit, are for setting either the US or European RTTY
frequency shifts. The unit comes with pins 2 & 3 of each jumper shorted, for use with the US RTTY shifts. If you
require the European RTTY shifts, then short pins 1 & 2 of J6, J7, and J8.
2
MFJ-462B MultiReader
Basic Operation:
The MFJ-462B MultiReaderTM is easy to operate. The push-button marked POWER controls the power to the
unit. After turning the unit ON, the MFJ-462B will light the PWR LED and display a scrolling sign-on message
across the LCD. On the left side of the unit is a hole for LCD contrast adjustment. When the display shows the
SIGNAL SETUP prompt, the MFJ-462B is ready for operation. All the MFJ-462B requires for proper operation is
that you select the signal type that you wish to decode, the signal baud rate, along with tuning to the desired signal
on your radio. Some signals may require that you select the REVERSE function to properly decode the desired
signal. Once you properly tune your radio to the desired signal, the MFJ-462B begins to display the decoded signal
information. If characters cannot be decoded, which is the case for some RTTY signals, an underscore character
("_") will be scrolled for each undecoded character. If the unit is not decoding characters correctly, check the
format setting to confirm that it is correct.
Menu Operation:
The MFJ-462B menu system consists of two front panel push-buttons labeled OPTION and SELECT along with
the LCD display. Pressing the OPTION button changes the option being displayed on the LCD. The available
OPTIONS within the MFJ-462B operating system are shown below:
1. SIGNAL SETUP
2. BAUD RATE SETUP
3. PRINTER SETUP
4. RAM SETUP
5. REVERSE SETUP
6. PRACTICE KEY
Pressing the SELECT button executes the OPTION currently displayed on the LCD, and goes to a sub-menu.
Under each sub-menu are other selectable options. The options under the sub-menus are the actual mode settings,
such as OPERATING MODE, BAUD RATE, PRINTER ON/OFF, RAM PLAYBACK and RAM SCROLLING,
just to name a few.
For example, turn the unit ON, and wait a few seconds for the unit's sign-on message to finish. When the MFJ462B finishes its sign-on message, it displays the first main menu option, SIGNAL SETUP. Pressing the
OPTION button displays the second main menu option, BAUD RATE SETUP. Pressing the SELECT button
now causes the MFJ-462B to switch to the BAUD RATE SETUP sub-menu and display the first option, 45
BAUD. Pressing the SELECT button now tells the MFJ-462B to select 45 baud as it's decode baud rate, and to
return to the main menu option, BAUD RATE SETUP. Pressing the OPTION button repeatedly will cause the
unit to scroll through the next main menu options, PRINTER SETUP, RAM SETUP, REVERSE SETUP, and
PRACTICE KEY and then back to the first main menu option, SIGNAL SETUP. Pressing the SELECT button
now tells the MFJ-462B to switch to the SIGNAL SETUP sub-menu and display the first option, CW. Press the
OPTION button to switch the display to RTTY 170 and then press the SELECT button. The MFJ-462B is now
ready to decode 45 baud, 170 shift RTTY. Refer to Figure 1 for the MFJ-462B MultiReader™ menu layout.
3
MFJ-462B MultiReader
MFJ MULTI-READER
CW, RTTY, ASCII,AMTOR...
COPYRIGHT MFJ ENTERPRISES 1994
RELEASE XXX
òò
SIGNAL SETUP BAUD RATE SETUP PRINTER SETUP RAM SETUP REVERSE SETUP PRACTICE KEY
òò òò òò òò òò òò
CW
RTTY 170
RTTY 425
RTTY 850
ASCII
AMTOR FEC
MAIN MENU
Main Menu:
The main menu allows you to select the configuration sub-menus, so you can set-up the MFJ-462B to decode the
various signals of which it is capable. There are six main menu OPTIONS:
45 BAUD
50 BAUD
57 BAUD
75 BAUD
100 BAUD
MAIN MENU
MFJ-462B MultiReader™ Menu Layout
PRINTER ON/OFF
MAIN MENU
RAM PLAYBACK
SCROLL SLOWER
SCROLL FASTER
PRINT RAM ON/OFF
Figure 1
CLEAR RAM
MAIN MENU
REVERSE ON/OFF
MAIN MENU
PRACTICE ON/OFF
MAIN MENU
1. SIGNAL SETUP
2. BAUD RATE SETUP
3. PRINTER SETUP
4. RAM SETUP
5. REVERSE SETUP
6. PRACTICE KEY
Press the OPTION button to change the menu options, then press the SELECT button to enable a sub-menu.
When the PRACTICE KEY option is displayed and you press the OPTION button, the MFJ-462B returns to the
beginning of the main menu, SIGNAL SETUP.
SIGNAL SETUP
The SIGNAL SETUP sub-menu allows you to choose the type of signal that you want the MFJ-462B to decode.
There are seven sub-menu selections:
1. CW
2. RTTY 170
3. RTTY 425
4. RTTY 850
5. ASCII
6. AMTOR FEC
7. MAIN MENU
Press the OPTION button to change the sub-menu options. Once the signal type you want is displayed on the
LCD, press the SELECT button to begin decoding the type of signal you selected. When you press the SELECT
button again, the MFJ-462B will exit signal decoding, and return to the SIGNAL SETUP sub-menu. If you are in
the RTTY mode, and the MFJ-462B is not decoding the signal, you may have the signal baud rate set improperly.
In this case, you can press the OPTION button to exit decoding and go to the BAUD RATE SETUP sub-menu.
At the BAUD RATE SETUP sub-menu, you may select another baud rate setting, then return to the SIGNAL
SETUP sub-menu and re-enter the previous RTTY mode. To exit this sub-menu without selecting a signal type,
press the OPTION button until the display reads MAIN MENU, then press the SELECT button to exit.
4
MFJ-462B MultiReader
BAUD RATE SETUP
The BAUD RATE SETUP sub-menu allows you to choose the baud rate of the signal that you want the MFJ-462B
to decode. This only applies to RTTY signals. The selections in this sub-menu do not affect the CW, ASCII, or
AMTOR FEC modes. There are six selections under the BAUD RATE SETUP sub-menu:
1. 45 BAUD
2. 50 BAUD
3. 57 BAUD
4. 75 BAUD
5. 100 BAUD
6. MAIN MENU
Press the OPTION button to change the sub-menu options, and press the SELECT button to select the baud rate
of the signal that you want to decode. The baud rate will be updated and the unit will return to the main menu. To
exit this sub-menu without changing the baud rate, press the OPTION button until the display reads MAIN
MENU, then press the SELECT button to exit.
PRINTER SETUP
This sub-menu allows you to enable or disable printing of received text to the EPSON or compatible printer
attached to your MFJ-462B. There are two sub-menu selections:
1. PRINTER ON/OFF
2. MAIN MENU
Press the OPTION button to change the sub-menu options, and press the SELECT button to change the printer
enable. If you press SELECT in the PRINTER ON/OFF option, the MFJ-462B will toggle the printer enable. It
will display the current state for approximately one second then switch to the main menu. If the printer enable is set
to ON, then each received character is sent to the printer as soon as it is displayed. The printer will store the
characters until either it has received eighty characters or a carriage return. To exit this sub-menu without
changing the printer enable, press the OPTION button until the display reads MAIN MENU, then press the
SELECT button to exit.
RAM SETUP
This sub-menu allows you to view received data that was saved to the RAM buffer. There are six sub-menu
selections under the RAM SETUP sub-menu:
1. RAM PLAYBACK
2. SCROLL SLOWER
3. SCROLL FASTER
4. PRINT RAM ON/OFF
5. CLEAR RAM
6. MAIN MENU
Press the SELECT button while the RAM SETUP prompt is displayed on the LCD to display the first RAM
SETUP sub-menu, RAM PLAYBACK. Pressing the SELECT button now prompts the MFJ-462B to begin
displaying all data received since being turned ON. The stored data will start scrolling from the beginning of the
buffer to the last received character. The last received character is followed by an "x" to denote the end of the
buffer. The RAM buffer has a storage capacity of only 8000 characters. If more than 8000 characters have been
received, only the last 8000 characters will be available for display. The display scroll rate may be modified by
pressing the SELECT button while in the SCROLL SLOWER or SCROLL FASTER selections. To stop
scrolling the view screen, press either the OPTION button or the SELECT button. Do the same to start the view
screen scrolling again. To exit before reaching the end of the buffer, press both the OPTION button and the
SELECT button at the same time.
5
MFJ-462B MultiReader
Pressing SELECT while in PRINT RAM ON/OFF sub-menu enables printing of the RAM buffer to an EPSON or
compatible printer. The printer must be attached to the DB-25 female connector labeled PRINTER PORT on the
rear of the MFJ-462B. This feature is only for printing the RAM buffer characters being displayed during RAM
PLAYBACK. The PRINT RAM ON/OFF feature is not for "real-time" printing of characters received off-the-air.
Pressing the SELECT button while in the CLEAR RAM sub-menu erases all characters currently in the RAM
buffer. In order to exit this sub-menu without changing the RAM options, press the OPTION button until the
display reads MAIN MENU, then press the SELECT button to exit.
REVERSE SETUP
This sub-menu allows you to enable or disable the REVERSE mode for RTTY, ASCII, AMTOR FEC. There are
two sub-menu selections under the REVERSE SETUP sub-menu:
1. REVERSE ON/OFF
2. MAIN MENU
Press the OPTION button to change the sub-menu options, then press the SELECT button to change modes. If
you press SELECT in the REVERSE ON/OFF option, the MFJ-462B will toggle the reverse mode. It will display
the current state for approximately one second then switch to the main menu. If the reverse mode is set to ON, then
the MFJ-462B will invert each bit received. To exit this sub-menu without changing the reverse mode, press the
OPTION button until the display reads MAIN MENU, then press the SELECT button to exit.
PRACTICE KEY
This sub-menu allows you to enable or disable the practice mode for the CW hand key. There are two sub-menu
selections under the PRACTICE KEY sub-menu:
1. PRACTICE ON/OFF
2. MAIN MENU
Press the OPTION button to change the sub-menu options, then press the SELECT button to enable the practice
session. If you press SELECT in the PRACTICE ON/OFF option, the MFJ-462B will enter the hand key practice
mode. All keying performed through the HAND KEY jack will be decoded and displayed on the LCD. In
addition, the decoded data will be sent to the printer port, as well as recorded in the RAM for future review. To
listen to the code, place the SPEAKER SELECT switch beside the HAND KEY jack IN to the HAND KEY
position. For normal operation, this switch should be in the RADIO (OUT) position. To exit the practice mode,
press either the SELECT or the OPTION button. To exit this sub-menu without entering the practice mode, press
the OPTION button until the display reads MAIN MENU, then press the SELECT button to exit.
Radio Tuning:
Proper tuning of your radio is critical to achieve optimum performance from your MFJ-462B. First, scan the bands
for a strong, clean signal. Then vary the frequency dial slightly and look for the following conditions.
CW
For maximum performance on CW, push the DATA/CW switch on the front panel IN to the CW position. This
will, however, slightly degrade performance of the data modes.
Before tuning to a CW station, set the THRESHOLD control fully clockwise. This sets the demodulation
bandwidth to the maximum. The MFJ-462B is calibrated for optimum CW performance with a 700 Hz audio tone.
Vary the frequency dial on your radio until both the DATA and LOCK LEDs follow the received audio signal.
Now turn the THRESHOLD control counter-clockwise until the DATA LED "loses" the signal. Fine tune your
radio until the DATA LED once again follows the CW signal. Repeat the above steps until you have adjusted the
THRESHOLD control to the minimum possible for "good copy". With the minimum bandwidth selected, the MFJ
462B will demodulate clean CW because the input circuit rejects noise that would otherwise interfere with the
signal.
6
MFJ-462B MultiReader
RTTY/ASCII/AMTOR FEC
First of all, set the DATA/CW switch on the front panel OUT, to the DATA position. The MFJ-462B is
calibrated for optimum RTTY performance with a MARK tone of 2125 Hz and a SPACE tone of either 2295,
2550, 2975 Hz for shifts of 170, 425, and 850 Hz, respectively. Optimum ASCII/AMTOR FEC performance
occurs with a MARK tone of 2125 Hz and a SPACE tone of 2295 Hz for a 170 Hz shift. Vary the frequency dial
on your radio until the LOCK LED is lit constantly. While keeping the LOCK LED lit, vary the frequency until
the DATA LED blinks with the audio tone shifts of the received signal. If the data is garbled, try changing baud
rates or REVERSE mode, or even the SIGNAL SETUP operating mode. This is because RTTY and AMTOR
FEC signals sound alike, and you may be trying to decode RTTY, with the MFJ-462B set to the AMTOR FEC
mode, or vice versa.
CW Abbreviations:
73 best regards MSG message
88 love and kisses NR number
ABT about NW now
AGN again OM old man
ANT antenna OP operator
BK break R are, received, roger
CPY copy RCVR receiver
CQ general call to any station RIG equipment
CUL see you later RST readability, strength, tone report
CU see you SIGS signal
DE from STN station
DX distance, rare station TEMP temperature
ES and TKS thanks
FB fine business TNX thanks
FER for UR you are
FREQ frequency U you
GA good afternoon, go ahead WL well
GE good evening WT watt
GM good morning WX weather
HR here XCVR transceiver
HW how XMTR transmitter
K go ahead XYL wife
Technical Assistance:
IIf you have any problem with this unit first check the appropriate section of this manual. If the manual does not reference
your problem or your problem is not solved by reading the manual, you may call MFJ Technical Service at 601-323-0549
or the MFJ Factory at 601-323-5869. You will be best helped if you have your unit, manual and all information on your
station handy so you can answer any questions the technicians may ask.
You can also send questions by mail to MFJ Enterprises, INC., 300 Industrial Park Road, Starkville, MS 39759; by FAX
to 601-323-6551; through Compuserve at 76206,1763; or by email to 76206.1763@Compuserve.com. Send a complete
description of your problem, an explanation of exactly how you are using your unit, and a complete description of your
station.
7
MFJ-462B MultiReader
MFJ-462B Schematic Diagram:
8
MFJ-462B Schematic Diagram:
MFJ-462B MultiReader
9
Loading...