MF Digital ЕС LX1-3702 User Manual

www.mfdigital.com
Quick Connect Guide
3702 Series
EC
LX1 Quick Connect Guide
222
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
Document Revision: 2005/2/3
Connection
Using a cross-over cable and ethernet ports from each machine, connect the LX1 to the MFDigital unit with the cross-over cable.
Page 2
LX1 Quick Connect Guide
333
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
Document Revision: 2005/2/3
Operation
1. Power up PRV-LX1 and MFDigital unit
2. Once MFD unit is powered up, click on "localhost
Page 3
444
LX1 Quick Connect Guide
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
Document Revision: 2005/2/3
In "localhost" click "send FTP image"
The FTPTREE dialog box will pop up.
Page 4
LX1 Quick Connect Guide
555
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
Document Revision: 2005/2/3
Here you enter the IP address, username and password of the LX1 unit
Enter the IP address of the LX1. The default IP address set by Pioneer is 192.168.0.16
Page 5
LX1 Quick Connect Guide
666
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
Document Revision: 2005/2/3
Enter the User Name for the LX1. The default User Name
set by Pioneer is PRVUser [case sensative]
Page 6
LX1 Quick Connect Guide
777
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
Document Revision: 2005/2/3
Enter the Password for the LX1. The default Password set
by Pioneer is prv-lx1, [case sensitive]
Page 7
LX1 Quick Connect Guide
888
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
**Note, the Pioneer factory settings can change, refer to the PRV-LX1 manual for IP Address, Username and Password configurations
Click "Browse Site" and the LX1 directory will appear
Document Revision: 2005/2/3
Page 8
LX1 Quick Connect Guide
999
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Click "imagefiles" on the PRV-LX1 directory to retrive DVD image
Document Revision: 2004/12/07
Document Revision: 2005/2/3
Once the DVD image is selected/highlighted click "OK"
Page 9
LX1 Quick Connect Guide
101010
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
Document Revision: 2005/2/3
The FTPTREE dialog box will automatically close and the LCD simulation display will show "receiving image XXX MBs" on the "localhost" tab of the MF Digital software
This indicates the DVD image selected is now being
transfered to the MF Digital unit.
Page 10
Loading...