5906
LX1 Quick Connect Guide
5906 Series
www.mfdigital.com
LX1 Quick Connect Guide
222
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
Document Revision: 6/15/2005
Connection
Using a cross-over cable and ethernet ports from each
machine, connect the LX1 to the MF Digital unit with the
cross-over cable.
Page 2
LX1 Quick Connect Guide
333
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
Document Revision: 6/15/2005
Operation
1. Power up PRV-LX1 and MF Digital unit
2. Once MFD unit is powered up, click on "localhost
Page 3
444
LX1 Quick Connect Guide
Scribe EC Quick Installation Guide
with Prism PLUS Printer
In "localhost" click "send FTP image"
The FTPTREE dialog box will pop up.
Document Revision: 2004/12/07
Document Revision: 6/15/2005
Page 4
LX1 Quick Connect Guide
555
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
Document Revision: 6/15/2005
Here you enter the IP address, username and password of
the LX1 unit
Enter the IP address of the LX1. The default IP address
set by Pioneer is 192.168.0.16
Page 5
LX1 Quick Connect Guide
666
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
Document Revision: 6/15/2005
Enter the User Name for the LX1. The default User Name
set by Pioneer is PRVUser [case sensitive]
Page 6
LX1 Quick Connect Guide
777
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
Document Revision: 6/15/2005
Enter the Password for the LX1. The default Password set
by Pioneer is prv-lx1, [case sensitive]
Page 7
LX1 Quick Connect Guide
888
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
**Note, the Pioneer factory settings can change, refer to
the PRV-LX1 manual for IP Address, Username and
Password configurations
Click "Browse Site" and the LX1 directory will appear
Document Revision: 6/15/2005
Page 8
LX1 Quick Connect Guide
999
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Click "imagefiles" on the PRV-LX1 directory to retrive
DVD image
Document Revision: 2004/12/07
Document Revision: 6/15/2005
Once the DVD image is selected/highlighted click "OK"
Page 9
LX1 Quick Connect Guide
101010
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
Document Revision: 6/15/2005
The FTPTREE dialog box will automatically close and the
LCD simulation display will show "receiving image XXX
MBs" on the "localhost" tab of the MF Digital software
This indicates the DVD image selected is now being
transferred to the MF Digital unit.
Page 10
Loading...