Baxter (Model 9100)
Installation Manual
BBaaxxtteerrHHaarrddwwaarreeMMuussttBBeeIInnssttaalllleeddPPrriioorrTTooSSooffttwwaarre
IInnssttaallllaattiioonn.
OOnncceeIInnssttaalllleedd,,RRiippttaassttiiccaannddBBaacckkuuppPPllaattiinnuummMMuusst
LLaauunncchheeddFFrroommSSccrriibbeePPrreemmiiuummUUttiilliittiieessTTaabbTTooWWoorrkk.
OOnnllyyMMFFDDiiggiittaallVVeerrssiioonnooffPPrreemmiiuummSSooffttwwaarreePPaacckkaaggees
WWiillllOOppeerraatteeIInnBBaaxxtteerr--DDooNNOOTTUUSSEEVVeerrssiioonnssFFrroom
MMaannuuffaaccttuurreessSSiittee…
.
…
wwwwww..mmffddiiggiittaall..ccoom
m
e
e
t
BBe
.
m
Document Revision 3/27/07
s
Q
Q
Baxter Installation Manual
uiicc
u
k
k
S
S
ett
e
u
u
p
p
Document Revision 3/27/07
SStteepp11..IInnssttaalllltthheeffoouurrppiillllaarrssoonntthheeIInnppuuttBBiin
Note: The bottoms of the Pillars have 2 different size posts, large and
small. Place the pillars with similar posts diagonally across from each
other into the corresponding holes.
SStteepp22..AAttttaacchhtthheeIInnppuuttBBiinnttooBBaaxxtteer
SStteepp33..AAttttaacchhUUSSBBCCaabblleettooBBaaxxtteerraannddyyoouurrPPCC.
SStteepp44..CCoonnnneecctttthheeppoowweerraaddaapptteerrttooBBaaxxtteerraannd
PPlluuggiinnttoooouuttlleett..TTuurrnnBBaaxxtteerroonn.
SStteepp55..TTuurrnnPPCCoonn.
.
r
.
n
.
d
SStteepp66..IInnssttaallllBBaaxxtteerrDDrriivveerrs
SStteepp77..IInnssttaallllSSccrriibbeePPCCSSooffttwwaarre
SStteepp88..IInnssttaallllPPrreemmiiuummUUttiilliittiieessooffyyoouurrcchhooiiccee.
s
e
2
.
Baxter Installation Manual
Document Revision 3/27/07
1 Getting Started
Baxter is the world’s smallest automated desktop loading
system that could t perfectly in any oce space. Its
patented tray enables users to duplicate 12cm, 8cm and
business-card discs with one easy turn of the disc pillars.
11..11WWhhaatt’’ssIInnTThheeBBoox
x
Please ensure that carton is not damaged and the
following items are included.
Baxter
Input bin
Output bin
USB cable
Power Cable
Power Adapter
Installation Disc
3 Baxter Software CDs
Remember to save all packing materials for future
use.
11..22SSyysstteemmRReeqquuiirreemmeennt
t
Microsoft® Windows XP
Pentium III 500Mhz (Minimum)
64 MB RAM
700 MB free disk space for CD, and 9 GB free
disk space for DVD.
At least 800x600 display with at least 16 Bit
colors
CD/DVD drive for installation
Required USB 2.0 interface
3
Baxter Installation Manual
2 Hardware Installation
Document Revision 3/27/07
22..11FFrroonnttVViieew
w
1. Robotic Arm
2. Status indicator
Green: Ready
Yellow: Burning
Red: Error
3. Output Bin
4. CD/DVD Burner
5. Input Bin
6. Rejects – Baxter discards rejects over the
top of (3) Output Bin
22..22RReeaarrVViieew
w
1. Fan
2. USB Connector
3. AC IN – Power Inlet
4. Power Switch
4
Baxter Installation Manual
Document Revision 3/27/07
22..33SSeettUUp
p
Please follow the procedures to set up:
Step 1: Install the four pillars on the Input bin
Note: The bottoms of the
Pillars have 2 different size
posts, large and small.
Place the pillars with
similar posts diagonally
across from each other
into the corresponding
holes.
Step 2: Attach the Input bin to Baxter
Note: Before turning on the
power, please make sure
that you have tightly
compressed the Input bin
onto Baxter
Operating Baxter Without Input Tray May
Void Warranty
5
Baxter Installation Manual
Document Revision 3/27/07
Step 3: Rotate the four pillars as shown in the
pictures below to use 12cm, 8cm and card size
medias for duplication.
8 cm 12 cm Card Size
Step 4: Connect your USB cable A-male end to
Baxter USB slot and B-male end to your PC USB
slot. Connect the power adapter and power cable
together. Then connect the adapter end to the AC
In on Baxter and plug in to an AC outlet.
USB AC Power
To AC
Wall Outlet
6
Baxter Installation Manual
Document Revision 3/27/07
Baxter Driver Installation
After connecting the USB cable to Baxter and your PC, Turn on the
power.
You will receive a message “Found New Hardware” and the Hardware
Wizard will start. (gure 1)
gure 1
Highlight the install software automatically button.
The driver will be installed automatically.
If the wizard does not nd it automatically, You will be asked to point
to the install le on the Baxter Inst allation CD. Select the le x:\Baxter
usb driver \MFD_Baxter.inf
7
Baxter Installation Manual
Document Revision 3/27/07
After the driver installation is co mplete you will receive a complete
message (gure 2)
Click Finish.
Congratulations, Baxter has been installed.
gure 2
8
Baxter Installation Manual
f
(g
Document Revision 3/27/07
Install The Scribe PC Software Prior
to Premium Utilities
Installing the SCRIBE PC Software
1. Insert the SCRIBE PC
software CD.
2.
From the CD ROM drive o
the computer, click Install
SCRIBE Software .
(g. 1)
3.
Click Next (g. 1).
4. Accept the license
5. Click Install (g. 3).
agreement and click Next
(g. 2).
(g. 2)
(g. 3)
6. Click Finish
. 4).
9
Baxter Installation Manual
Document Revision 3/27/07
Installing Riptastic
Riptastic must be installed using the
installation wizard prior to Scribe Launch.
Insert the Riptastic CD. and run the setup le from windows.
You will receive the message “ Would you like to install Riptastic
now? (g1)
(g. 4)
Click Yes to Install.
The Install wizard will appear.
g 1
10
Baxter Installation Manual
Document Revision 3/27/07
Click Next.
The License agreement screen will appear.
Click I agree.
Next you the Customer Information Screen will appear.
11
Baxter Installation Manual
Document Revision 3/27/07
Type your name and company information and click next.
Select the directory for the installation and click next.
The conrm installation screen will appear. Click Next to
continue.
12
Baxter Installation Manual
After the program installs, you will receive an Installation
Completed message.
Document Revision 3/27/07
Click the close button.
The Riptastic Installation is complete. Launch Riptastic via
Scribe Launch Tab. At startup install the supplied License
number and Riptastic is ready to use.
Software Questions Related to Riptastic
Software, Please Visit
http://www.riptastic.com/help/index.htm
13
Baxter Installation Manual
Document Revision 3/27/07
Installing The Backup Platinum Software
Insert the Backup Platinum and run the setup le from windows.
Backup Platinum must be installed using the
installation wizard prior to Scribe Launch.
The Welcome To Backup Platinum screen will appear.
Click the Next button.
You will receive the Read Me Screen.
14
Baxter Installation Manual
Document Revision 3/27/07
After reading, click the Next button.
The license Agreement screen will appear.
Highlight the I accept this agreement and click Next.
The Choose Destination Folder will appear.
15
Baxter Installation Manual
Document Revision 3/27/07
Select the directory that you want to install Backup Platinum to
and click next.
The Start Installation Screen will appear.
Click the Next button to continue.
You will receive the Installation Complete message.
16
Baxter Installation Manual
Document Revision 3/27/07
Backup Platinum Has Been Installed.
Launch Backup Platinum via Scri be Launch Tab. At startup
install the supplied License number and Backup Platinum is
ready to use.
Software Questions Related to Backup Platinum
Software, Please Visit
http://www.backupplatinum.com/help-online.shtml
17
Baxter Installation Manual
Document Revision 3/27/07
Important DVD Image Information
If your DVD image file conforms to the UDF standard, but ends in the .ISO file
extension, you will need to rename it .UDF before it can be used.
* All .ISO images will not conform to .UDF standard so after converting .ISO to .UDF
you must burn a single disc and check that disc thoroughly before duplicating.
A simple browsing of the disc for proper folder structure is not sufficient. Consider
a file compare or the opening of several key files.
Troubleshooting
1. If Baxter’s Arm Gets Stuck At the Bottom or The Top.
See The Illustrations Below
2. The Scribe PC program did not recognize Baxter.
a. Check the power cable on the back of the Baxter.
b. Make sure the power switch on Baxter is turned ON.
c. Check the USB cable connection between Baxter loader and the host PC
(page # 5).
3. Scribe PC program did not recognize the drive.
a. Press the eject button on the drive to check for power to the drives.
b. Check the power cable connection on the back of the drive bay.
c. Check if the Windows operating system recognized the drives by going to
My Computer or Device Manager. Windows operating system must
initialize the drives prior to executing the Scribe PC program.
4. Failed to pick Discs. Sticky Discs
Baxter will have diculty picking discs that are stuck
together static or discs of inferior quality.
a. Fan Discs
b. Use Discs not prone to stickiness
18
How to reset Baxter’s Arm if it gets stuck.
1. Turn off the power Remove the power cord
and USB Cord from behind Baxter.
2. Carefully, place Baxter on its side (label
side).
3. On the bottom on the arm assembly there
are two phillips screws on the silver
bracket. Remove the two phillips screws.
4. The arm assembly has a hook and a slip
notch that attaches to the drive base. You
will need to push gently in an upwards
motion to detach the arm assembly.
5. Upon doing this, you will see a yellow
ribbon cable. The cable is attached to a pin
connection on the side of the drive base. It
might be easier to disconnect it temporarily
while performing the next few steps.
6. Taking the arm assembly in your hand,
look for the small silver motor that has a
white plastic gear.
Using your finger, rotate this gear so that
the arm moves either in an upward or
downward direction.
If you are holding the arm assembly as
pictured, rotating the gear counter
clockwise(pushing away from you) will
cause Baxter’s arm to move down, rotating
the gear clockwise (towards you) will
cause Baxter’s arm to move up It is
suggested to rotate this gear so the arm
moves about an inch from where it was.
7. Once the arm is in a satisfactory position,
you can now (if disconnected) reconnect
the yellow cable.
8. As you reattach the arm assembly, be sure
to tuck the yellow cable back in the cove of
the arm assembly. The arm assembly as
stated before is hooked to the drive base,
after you have the arm assembly flush on
the drive base, gently push downward to
lock the hook & slip notch in place.
9. Be sure to reinsert the two phillips screws
on the silver bracket (below the arm
assembly),
Now the arm assembly is firmly connected.
10. Reconnect the power cord and the USB
cable.
11. Turn on the Baxter Unit and see if the arm
resets itself by hovering over the output
tray.
Baxter's arm light should now be a solid
green light.
Loading...