PRELIMINARY PRODUCT INFORMATION
CINE-STUDIO
AMIE-SUB
Compact Cinema Subwoofer
The Amie-Sub compact subwoofer is the
perfect complement for Amie Precision Studio
monitor. The linear, self-powered Amie-Sub
offers outstanding sonic characteristics such
as clean, punchy transients and excellent phase
coherence with impressive low-frequencies
down to 25 Hz in a compact cabinet. The AmieSub can be installed in stereo systems and has
ample headroom to be used in multichannel
LCR, 5.1, and 7.1 systems.
The Amie-Sub includes a single 15-inch lowfrequency, long-excursion cone driver. The
driver is housed in an optimally tuned, vented
cabinet and powered by a single-channel
amplifier. The cabinet’s shape provides easy
access to all connectors while being placed
directly in front of a wall. On-board processing
includes driver protection circuitry, low-pass
filtering, and correction filters for phase and
frequency responses.
The Amie-Sub has been optimized for use
with Amie but can also be used with other
Meyer Sound cinema loudspeakers, including
Acheron Designer screen channel loudspeakers
and the HMS-5, HMS-10, and HMS-12
surround loudspeakers in immersive surround
applications.
The Amie-Sub cabinet is constructed of
premium birch plywood and coated with a
low-gloss, black-textured finish. A protective
hex-stamped grille is standard and an optional
grille frame with black cloth is available.
Options include the MUB-Amie-Sub U-bracket
for mounting the subwoofer from ceilings.
features & benefits
High peak power output with excellent
°
transient reproduction
Extended low frequency range down to
°
25 Hz
Extremely low distortion for exceptional
°
low-frequency clarity
Flat amplitude and phase responses for
°
tonal accuracy
Integrates with Amie and Acheron
°
Designer screen channel loudspeakers
Integrates with HMS-5, HMS-10 and
°
HMS-12 surround loudspeakers
preliminary specifications
Acoustical
Operating Frequency Range
Frequency Response
Phase Response 33 Hz – 145 Hz ±30 degrees
Transducer
Low Frequency One 15-inch long-excursion cone driver
Audio Input
Connectors XLR 3-pin female input with XLR 3-pin male loop output
Input Impedance 10 kΩ differential between pins 2 and 3
Nominal Input Sensitivity 6.0 dBV (2.0 V rms) continuous average is typically the onset of limiting
for noise and music
Amplifier
Type Single channel
Load 3 ohms
Cooling Convection
AC Power
Connectors powerCON 20 inlet (with loop outlet to feed Amie loudspeakers)
Voltage Selection Automatic, continuous range from 90 V AC to 265 V AC
Safety Rated Voltage Range 100–240 V AC, 50–60 Hz
Physical
Dimensions 24.00 inches W x 17.5 inches H x 19.00 inches D
(609 mm x 444 mm x 482 mm)
Weight 74 lbs (33.5 kg)
Enclosure Premium birch plywood with low-gloss, textured black finish
Mounting Side nut-plates with 3/8” threads for optional MUB-Amie-Sub U-bracket
1
22 Hz – 160 Hz
2
25 Hz – 145 Hz ±4 dB
solutions
Small- to medium-sized editing rooms
°
Stereo and surround mixing for film and
°
video postproduction
Broadcast monitoring
°
Notes
1. Recommended maximum operating
frequency range. Response depends on
loading conditions and room acoustics.
2. Free field, measured with 1/3-octave
frequency resolution at 4 meters.
Amie-Sub
04.251.004.01 A
Copyright © 2016
Meyer Sound Laboratories Inc.
All rights reserved
meyer sound laboratories inc.
2832 San Pablo Avenue
Berkeley, CA 94702
+1 510 486.1166
techsupport@meyersound.com
www.meyersound.com
Loading...