M.E.Y. Equipment Residential Cylinder Mower User Manual

8

Alroh Warranty

Refer to your warranty card for terms and conditions.

Model No …..……………… … Serial No …………………..

Service Record

Date Purchased

1st Year Service
3rd Year Service
5th Year Service
7th Year Service 8th Year Service
9th Year Service 10th Year Service

11th Year Service 12th Year Service

Initial Oil Change

2nd Year Service
4th Year Service
6th Year Service

Your Local Alroh Dealer

RESIDENTIAL CYLINDER MOWER

OWNER’S MANUAL

Manufactured by M.E.Y. Equipment

8

200 Collier Road, Bayswater WA 6053
Tel [phone] Fax [phone]
www.alroh.com.au Established 1951

2

ALROH MOWER

CONTROLS & BENEFITS

7

Cutting Height

It is important to set your mower to the correct cutting height to
suit your lawn type. This could vary from 35mm for the new style
soft buffalo to 8mm for the bowling green finish!

The cutting height might also be changed on a seasonal basis.
Scalping a lawn during the winter can take a long time to recover
and cause stress in hot dry summer spells.

Fortunately, your Alroh mower has a robust quick turn knob to
allow easy height changes to be made. Clockwise turns raise the
cutting height and anticlockwise lowers it. Tilting the mower to lift
the front roller off the ground makes it easier to turn the knob
when raising the cutting height.

Uneven Cutting

Your Alroh mower has been fitted with independent adjusters for
both the front and rear rollers on the non chaincase side.

Congratulations

Thank you for buying a quality designed and manufactured Australian made
product. Before operating the mower, we recommend that you read this op­erating guide and the engine manual. THINK SAFETY AT ALL TIMES!

2

These have been preset at the factory but should they become mis­aligned due to a severe knock or dropping, we recommend that
you consult your local authorised dealer for adjustment.

Chains & Belts
Periodic adjustment of the mower belts and drive chain is required

during the life of the mower. We recommend annual service of the
mower by your local authorized dealer so that these adjustments
can be made.

Correct chain and belt tension will ensure that the pulleys and
sprockets will give long and reliable service.

7