Mettler Toledo XPR2, XPR2U, XPR6U, XPR6UD5, XPR10 User Manual
F
F
User Manual
Microbalances
XPR models
Overview balance
18
15
17
22
19
20
21
16
1
2
3
4
5
6
7
8
9
F
14
F
10
11
12
13
Legend balance
Cooling element
1
SmartSens
2
USB device port
3
USB host port
4
Socket for terminal connection cable
5
Weighing unit
6
Leveling foot
7
USB host port
8
Ethernet port
9
Socket for AC/DC adapter
10
Terminal with protective cover
11
7 inch capacitive color TFT touchscreen
12
Terminal buttons
13
Terminal StatusLight
14
Door handle
15
Drip tray
16
Weighing pan
17
Weighing chamber
18
Glass draft shield
19
Glass draft shield cover
20
Model plate
21
Weighing display (SmartView)
22
Overview balance 3XPR
Overview terminal
1
2
53 4
Legend terminal
No. Key Name Explanation
1
Door open Opens the weighing chamber door to the left (default value).
6
7
2
3
4
5
6
7
ON/OFF Switches the balance on and off.
7 inch capacitive
TFT touchscreen
Tare Tares the balance.
Zero Zeros the balance.
Home To return from any menu level to the main weighing screen.
Door open Opens the weighing chamber door to the right (default value).
By tapping , the balance is not completely switched off but
goes into standby mode. To switch the balance completely off,
it must be unplugged from the power supply.
Note
Do not disconnect the balance from the power supply unless
the balance is not used for an extended period of time.
The touchscreen shows information about the current weighing
process.
This function is used when the weighing process involves
containers. After taring the balance, the screen shows Net
which indicates that all displayed weights are net.
The balance must always be zeroed before starting the
weighing process. After zeroing, the balance sets a new zero
point.
Overview terminal4 XPR
1 Safety Information
• Read and understand the instructions in this manual before using the balance.
• Keep this manual for future reference.
• Include this manual if you pass on the balance to other parties.
If the balance is not used according to the instructions in this manual or if it is modified, the safety of the
balance may be impaired and Mettler-Toledo GmbH assumes no liability.
Finding more information
Additional information about this balance can be found in the Operating Instructions on the CDROM or online.
u www.mt.com/XPR-micro-OI
u www.mt.com/library
1.1 Definition of signal warnings and symbols
Safety notes are marked with signal words and warning symbols. These show safety issues and warnings.
Ignoring the safety notes may lead to personal injury, damage to the instrument, malfunctions and false
results.
WARNING
CAUTION
NOTICE
for a hazardous situation with medium risk, possibly resulting in death or severe
injury if not avoided.
for a hazardous situation with low risk, resulting in minor or moderate injury if not
avoided.
for a hazardous situation with low risk, resulting in damage to the instrument, other
material damage, malfunctions and erroneous results, or loss of data.
General hazard Electrical shock
1.2 Product safety information
Intended use
This balance is designed to be used in laboratories by trained staff. The balance is intended for weighing
purposes.
Any other type of use and operation beyond the limits of technical specifications without written consent from
Mettler-Toledo GmbH is considered as not intended.
General safety information
This balance complies with current industry standards and the recognized safety regulations; however, it
can constitute a hazard in use. Do not open the balance housing: The balance contains no user-serviceable
parts. In the event of problems, please contact a METTLER TOLEDO representative.
Always operate and use your instrument only in accordance with the instructions contained in this
document. The instructions for setting up your new instrument must be strictly observed.
If the instrument is not used according to the Operating Instructions, protection of the instrument may
be impaired and METTLER TOLEDO assumes no liability.
Staff safety
This printed document must be read and understood before using the balance. This printed document must
be retained for future reference.
The balance must not be altered or modified in any way. Only use METTLER TOLEDO original spare parts
and accessories.
Safety Information 5XPR
Safety notes
WARNING
Danger of death or serious injury due to electric shock!
Contact with parts that contain a live current can lead to injury and death. If the balance
cannot be shut down in an emergency situation, people can be injured or the balance can be
damaged.
1 Only use the original universal AC/DC adapter delivered with your balance.
2 Check that the voltage printed on the balance is the same as your local power supply
voltage.
ð If this is not the case, under no circumstances connect the AC/DC adapter to the power
supply, but contact a METTLER TOLEDO representative.
3 Only plug the adapter into a socket which is grounded.
NOTICE
Damage to the balance due to wrong usage.
1 Only use indoors in dry locations.
2 Do not use pointed objects to operate the touchscreen.
3 Only use original METTLER TOLEDO accessories and peripheral devices.
4 Do not open the balance housing. It contains no user-serviceable parts. Contact a
METTLER TOLEDO representative in case of any issue.
Safety Information6 XPR
2 Basic Navigation
2.1 Main sections at a glance
The method work screen is the central navigation point where all the menus and settings can be reached
(the picture shows the method work screen of the method General Weighing). The sections Balance menu,
Methods and Protocol can be opened by tapping the drawers along the method work screen.
2.2 Method work screen
The method work screen is the basic screen that appears when working with the balance. Depending on the
method, the method work screen can slightly differ, but the basic elements appear for all methods.
No. Name Explanation
User name Shows the name of the current user.
1
Level indicator Indicates if the balance is leveled.
2
Weighing value field Shows the current weighing value.
3
Info weight Shows the current weighing value in another unit.
4
Basic Navigation 7XPR
Loading...