Mettler Toledo MS204TS, MS304TS, MS104TS Data Sheet

MS-TS Analytical

Trusted Results at Your Fingertips

Worry-free Weighing

Built-in function simplifies balance leveling

The built-in LevelControl function issues a warning when the balance is not level and provides onscreen guidance to help you level the balance correctly within seconds.

MinWeigh function ensures process tolerances

The weight value remains red until the net sample is above the pre-programmed minimum value. A user-defined minimum weight can also be programmed into the balance to provide an additional safety fa ctor.

Passcodes protect balance settings

Create a passcode to restrict modification of balance set tings to authorized personnel only – functions that affect metrological performance are protected against accidental alteration.

Easy-cleaning features save time and effort

Remove, clean and replace all of the QuickLock draft shield glass panels in just a few simple steps, without tools and without moving the balance. The housing has smooth surfaces and rounded edges for easy cleaning.

MS-TS Analytical Balances

Trusted Performance

The built-in security features on MS-TS analytical balances ensure results are always valid. Operators receive a warning if any problems are encountered or tolerances are not adhered to. Corrective actions can be taken immediately, avoiding costly reworking later.

LevelControl, MinWeigh and automatic internal adjustment with proFACT support compliance with regulations. The ISOLog function maintains a record of all weighing relevant changes to the balance’s settings. For additional security, settings can be passcode protected.

The 7” extra-large color TFT touchscreen display is operable through cotton, silicon and rubber gloves. An intuitive user interface and 18mm high digits bring comfort to your daily tasks.

30247877_DS_en_MS-TS_Analytical.indd 1 12.02.15 16:54

MS-TS Analytical Balances

Technical Specifications MS104TS MS204TS MS304TS

Limit values

Maximum capacity 120 g 220 g 320 g

Readability 0.1 m g 0.1 m g 0.1 m g

Tare range (from … to) 0 … 120 g 0 … 220 g 0 … 320 g

Repeatability (nominal) (sd) 0.1 mg (100 g) 0.1 mg (100 g) 0.1 mg (100 g)

Linearity deviation (test load) 0.2 mg (20 g) 0.2 mg (50 g) 0.2 mg (50 g)

Eccentricity deviation (test load)

Sensitivity offset (test weight) 0.8 mg (100 g) 1 mg (200 g) 1.5 mg (300 g)

Sensitivity temperature drift

Sensitivity stability

Typical values

Repeatability (at low load) 0.08 mg 0.08 mg 0.08 mg

Linearity deviation 0.06 mg 0.06 mg 0.06 mg

Eccentric deviation (test load)

Sensitivity offset (test weight) 0.2mg (100g) 0.24mg (200g) 0.6mg (300g)

USP minimum sample weight (5% load, k=2, U=0.10%)

Minimum sample weight (5% load, k=2, U=1%)

Settling time 2 s 2 s 3 s

Weighing pan dimensions (mm)

0.4 mg (50 g) 0.4 mg (100 g) 0.4 mg (100 g)

1.5 ppm/°C 1.5 ppm/°C 1.5 ppm/°C

2.5 ppm/a 2.5 ppm/a 2.5 ppm/a

0.1mg (50g) 0.12mg (100g) 0.12mg (100g)

160 m g 160 m g 160 mg

16 m g 16 m g 16 m g

∅ 90 ∅ 90 ∅ 90

according to OIML R76;

in the temperature range 10 to 30°C,

Stability of sensitivity with proFACT

self-adjustment switched on; s: seconds; a: year (annum); sd: standard deviation

Embedded applications

Weighing, statistics for all applications, check weighing, totaling, piece counting, formulation, percent weighing, factor weighing, dynamic weighing, density, dosing and PC Direct (for easy data transfer).

AccessoriesFeatures

MonoBloc weighing cell

Strong overload protection

proFACT internal adjustment

Results

MinWeigh warning function

Accurate

Full metal housing

7” Extra-large color TFT touchscreen

18mm high digits

LevelControl function

Efficient

Operation

Statistical data analysis

Easy cleaning and QuickLock

ISO-Log

Sample ID input

Quality

Passcode protection

Assurance

3 interfaces: USB device, USB host, RS232

Bluetooth option

Process

Seamless

PC Direct application

P-5x thermal printers

Fast, high quality printouts on paper, self-adhesive labels and continuous self-adhesive paper (including barcodes).

Density kit

Dedicated kit for determining the density of solid and liquid substances with the built-in application.

Bluetooth adaptors

Wirelessly send data bet ween the balance and a PC, tablet or printer. No additional software needed.

U-electrode

The freestanding U-Electrode removes electrostatic charges on samples and containers.

SmartPrep

Single-use, antistatic funnels enable safe and fast weighing-in of powders. Simply weigh, transfer and rinse.

For further information on acces sories, please visit

www.mt.com/lab-accessories

GWP

Good Weighing Practice™

www.mt.com/GWP

Mettler-Toledo AG

Laboratory Weighing CH-8606 Greifensee, Switzerland

www.mt.com/ms-analytical

For more information

Tel. +41 44 944 22 11 Fax +41 44 944 30 60

30247877_DS_en_MS-TS_Analytical.indd 2 12.02.15 16:54