Mettler Toledo ICS685 Quick Manual

ICS685a
ICS685d

ICS685d-...XS/f
ICS685k-...XS/f
ICS685k-...XS/DR/f

ICS685d-...SM/f
ICS685k-...SM/f
ICS685k-...SM/DR/f

ICS685d-...LA/f
ICS685k-...LA/f
ICS685k-...LA/DR/f

Quick Guide

ICS685

Weighing terminals

Compact scales

Congratulations on choosing the quality and precision of METTLER TOLEDO. Proper use
according to these instructions and regular calibration and maintenance by our factory­trained service team ensure dependable and accurate operation to protect your investment.
Contact us about a ServiceXXL agreement tailored to your needs and budget.

We invite you to register your product at

www.mt.com/productregistration

so we can contact you about enhancements, updates and important notications concern

ing your METTLER TOLEDO product.

2

METTLER TOL EDO Quick Guide ICS685

04/12Order number 22023443A

3

METTLER TOL EDO Quick Guide ICS68504/12 Order number 22023443A

1 Documentation

In addition to this printed Quick Guide you are supplied a CD-ROM with the following
contents:

• User manuals

• Data sheets

• Videos

• Brochures

2 Safety instructions

General

▲ Do not use the device in a hazardous environment. Special devices are available in

our range of products for hazardous environments.

▲ The safety of the device cannot be ensured if it is not operated in accordance with

these operating instructions.

▲ Only authorised personnel may open the device.

Devices with protection level IP65

Devices with protection level IP65 are dust-tight and protected from water jets according to
EN 60529. They are suitable for use in dusty environment and brief contact with liquids.

▲ Ensure that the device is dried off again after coming into contact with liquid.
▲ Do not use the device in environments with a risk of corrosion.
▲ Do not ood the device or submerge it in liquid.

Devices with built-in power supply unit

▲ Ensure that the power socket outlet for the device is earthed and easily accessible, so

that it can be de-energised rapidly in emergencies.

▲ Ensure that the supply voltage at the installation site lies within the range of 100V

to 240V.

▲ Check the power cable regularly for damage. If it is damaged, immediately disconnect

the device from the power supply unit.

Devices with built-in storage battery

▲ Only use storage batteries from the manufacturer.
▲ Do not use the battery charger in humid or dusty rooms or below 0 °C (32 °F)

ambient temperature.

▲ After the storage battery has been charged, the cover cap of the charging socket at the

device must be closed.

Compact scales

▲ Avoid falling loads, shock loads as well as impacts from the side.