Mettler Toledo ICS649a-check, ICS649d-check, ICS649-check User Manual

ICS649a-check
ICS649d-check

ICS649a-check-.../c

ICS649a-check-.../f

ICS649a-check-.../t

User manual

ICS649-check

Weighing terminals

Terminal and platform combinations

Service XXL

Congratulations on choosing the quality and precision of METTLER TOLEDO. Proper use
according to these instructions and regular calibration and maintenance by our factory­trained service team ensure dependable and accurate operation to protect your investment.
Contact us about a ServiceXXL agreement tailored to your needs and budget.

We invite you to register your product at

www.mt.com/productregistration

so we can contact you about enhancements, updates and important notications concern

ing your METTLER TOLEDO product.

2

METTLER TOL EDO User manual ICS649-check

12/10Order number 22021156A

3

METTLER TOL EDO User manual ICS649-check12/10 Order number 22021156A

Contents

1 Introduction .........................................................................................................5

1.1 Safety instructions ................................................................................................5

1.2 Presentation ......................................................................................................... 6

1.3 Tracing and tracking features ............................................................................... 16

1.4 Commissioning .................................................................................................. 18

1.5 Use in hygienically sensitive areas ........................................................................20

2 Operation .......................................................................................................... 21

2.1 Switching on and off .......................................................................................... 21

2.2 Zeroing / Zero point correction ..............................................................................22

2.3 Simple weighing ................................................................................................. 22

2.4 Weighing with tare .............................................................................................. 22

2.5 Switching scales ................................................................................................. 24

2.6 Printing results ...................................................................................................24

2.7 Totalising ........................................................................................................... 25

2.8 Average (dynamic) weighing ................................................................................27

2.9 Piece counting ................................................................................................... 27

2.10 Working with identications ................................................................................. 29

2.11 Displaying information ........................................................................................ 29

2.12 Environment and cleaning ...................................................................................30

2.13 Verication test ................................................................................................... 32

3 Over/Under Checkweighing ................................................................................33

3.1 Specifying target values ....................................................................................... 33

3.2 Over/Under Checkweighing procedure ...................................................................36

3.3 Over/Under Checkweighing during subtractive weighing ..........................................38

3.4 Over/Under Checkweighing with "Quick start" ........................................................39

3.5 Over/Under Checkweighing in Take-away mode .....................................................40

3.6 Over/Under Checkweighing to zero ....................................................................... 41

3.7 Terminating Over/Under Checkweighing ................................................................42

4 Settings in the menu ..........................................................................................43

4.1 Operating the menu ............................................................................................43

4.2 Scale menu block – analog scales .......................................................................46

4.3 Scale menu block – IDNet scales .........................................................................49

4.4 Application menu block .......................................................................................52

4.5 Terminal menu block ...........................................................................................56

4.6 Communication menu block ................................................................................ 62

4.7 Maintenance menu block.....................................................................................71

4

METTLER TOL EDO User manual ICS649-check

12/10Order number 22021156A

Contents

5 Quick Select menu .............................................................................................73

5.1 Quick Select menu overview ................................................................................ 73

5.2 Entering main menu ............................................................................................ 73

5.3 Logout ............................................................................................................... 73

5.4 Performing routine test ........................................................................................74

5.5 Calling up routine test log le ............................................................................... 75

5.6 Calling up alibi log le .........................................................................................76

5.7 Calling up calibration log le ................................................................................77

6 Event and error messages .................................................................................. 78

6.1 Error conditions .................................................................................................. 78

6.2 Errors and warnings ............................................................................................ 79

6.3 Smart weighing counter / spanner icon ................................................................. 81

7 Technical data and accessories ..........................................................................82

7.1 Technical data weighing terminal ......................................................................... 82

7.2 Technical data weighing platforms .......................................................................85

7.3 Accessories........................................................................................................89

8 Appendix ..........................................................................................................92

8.1 Tests for utilisation in hygienically sensitive areas ..................................................92

8.2 Notice for veried instruments in EC countries ........................................................92

8.3 Tables of Geo Code values...................................................................................93

8.4 Disposal ............................................................................................................94

8.5 Protocol printouts ...............................................................................................95

8.6 Index ................................................................................................................. 96

5

METTLER TOL EDO User manual ICS649-check12/10 Order number 22021156A

1 Introduction

1.1 Safety instructions

General

▲ Do not use the device in a hazardous environment. Special devices are available in

our range of products for hazardous environments.

▲ The safety of the device cannot be ensured if it is not operated in accordance with

these operating instructions.

▲ Only authorised personnel may open the device.

Devices with built-in power supply unit

▲ Ensure that the power socket outlet for the device is earthed and easily accessible, so

that it can be de-energised rapidly in emergencies.

▲ Ensure that the supply voltage at the installation site lies within the range of 100V

to 240V.

▲ Check the power cable regularly for damage. If it is damaged, immediately disconnect

the device from the power supply.

▲ Ensure that there is a space of at least 3 cm (1.25") at the rear in order to prevent the

power cable from being bent too strongly.

Devices with built-in storage battery

▲ Do not use the battery charger in humid or dusty rooms or below 0 °C (32 °F)

ambient temperature.

▲ After the built-in storage battery has been charged, the cover cap of the charging

socket at the device must be closed.

Terminal and platform combinations

▲ The maximum static safe load must never be exceeded. Observe the operation limits,

see Technical data.

▲ Avoid falling loads, shock loads as well as impacts from the side.

6

METTLER TOL EDO User manual ICS649-check

12/10Order number 22021156A

Introduction

1.2 Presentation

1.2.1 Weighing terminals

There are two versions of the ICS649-check weighing terminal:
ICS649a-check with analog scale interface:
to connect analog METTLER TOLEDO weighing platforms
ICS649d-check with digital scale interface:
to connect METTLER TOLEDO weighing platforms with IDNet interface

On the rear the weighing terminal is equipped with a swivel bracket for mounting the
terminal on the wall or to a METTLER TOLEDO column. As an accessory a table stand for
setting up the terminal on the table is available.

1.2.2 Terminal and platform combinations

The complete name of a terminal and platform combination also indicates the type, size
and capacity of the connected analog weighing platform. E.g., ICS649a-check-A6/c
stands for
ICS649a-check type of weighing terminal and type of weighing interface
A design and size of the weighing platform
6 weighing platform capacity in kg
c mechanical design

As default the weighing platforms are equipped with a hermetically sealed stainless steel
load cell and a readability setting of 2 x 3000 or 5000 divisions, non-approved.

ICS649a-check-.../f

The weighing terminal is xed mounted in front of the weighing platform.

Terminal and platform can be handled as one unit, easy to install and to change location.
The perfect solution if a stand or a bracket would hinder an effective working process.

ICS649a-check-.../t

Weighing terminal and weighing platform are connected by cable.
Suitable for wall mount operation and desk operation with an additional desk mounting
plate, see Options. The combination can be upgraded with a stand, see Accessories.

7

METTLER TOL EDO User manual ICS649-check12/10 Order number 22021156A

ICS649a-check-.../c

Hygienic optimal version. Weighing terminal and column are seamlessly welded together.
Easy to clean, cables run inside the column.

1.2.3 Options

The following options are available for the ICS649-check:

ICS649a-check,
ICS649d-check,
ICS649a-check-.../f,
ICS649a-check-.../t

ICS649a-check-.../c

Built-in storage battery

✔ ✔

Optional scale interface (SCALE 2) • analog

• digital

–

Optional communication interface
(COM 2)

• RS232

• RS422/RS485

• Ethernet

• WLAN

• RS232

• RS422/RS485

• Ethernet

• WLAN

• USB

• Digital I/O

Optional communication interface
(COM 3)

• RS232

• RS422/RS485

• USB

• Digital I/O

–

Desk mounting plate

✔

–

8

METTLER TOL EDO User manual ICS649-check

12/10Order number 22021156A

Introduction

Terminal and platform combinations

• Load cells for more challenging environments
– Standard: hermetically sealed stainless steel load cell (identical to PBA430)
– Option: loadcell with KS+ coating (identical to PBA430 with option loadcell with

KS+ coating)

• Other resolutions (availability depending on region, weighing unit and Weights and

Measures approval)

– Verication OIML Class III, 1 x 3,000 e
– Verication OIML Class III, 2 x 3,000 e MR
– 6,000 d (non-approvable)
– 10,000 d (non-approvable)
– 15,000 d (non-approvable)
– 30,000 d (non-approvable)

9

METTLER TOL EDO User manual ICS649-check12/10 Order number 22021156A

1.2.4 Display

If you specify a target weight for Over/Under Checkweighing, the display automatically
switches from the straight weighing display to the Over/Under Checkweighing display.
To meet your special requirements three different display layouts are selectable in the
terminal menu.

Straight weighing display

9

4

5

6

7

8

11

10

21 3

1 Metrological data – for details see below
2 Weight value with star, sign and stability monitor – for details see below
3 Spanner icon: service needed – for details see Event and error messages
4 Battery symbol
5 Net/Gross
6 Unit
7 Calender – can be activated in the menu
8 Navigation hint: use cursor keys <, > for scrolling soft key pages
9 Soft keys (factory setting, page 1)
10 Auxiliary data – 3 lines can be dened in the menu
11 Symbol and info line – for details see below

Default layout

Weight values in 3-line mode

10

METTLER TOL EDO User manual ICS649-check

12/10Order number 22021156A

Introduction

Over/Under Checkweighing display

In Over/Under Checkweighing the display uses colours to indicate the Over/Under
Checkweighing status.

Instead of the weight display a bargraph is displayed indicating target values.
The example shows the default colour for a sample below the lower tolerance.

Tolerances and target weight are displayed in 3 lines.
The example shows the default colour for a sample above the upper tolerance.

The example shows the default colour for a good sample.

Default layout

3-line mode

Colour mode

11

METTLER TOL EDO User manual ICS649-check12/10 Order number 22021156A

Metrological data line

In the metrological data line the following information is displayed:

Symbol Information Remark

,
,

Accuracy classes Displayed only if the scale is approved

according to the Weights and Measures
guidelines

, ,

Weighing range
information

For multi range devices only,
dsplayed only if the scale is approved
according to the Weights and Measures
guidelines

,

Maximum capacity

Minimum capacity Displayed only if the scale is approved

according to the OIML Weights and
Measures guidelines

Approved resolution OIML: Displayed only if the scale is

approved

NTEP: Displayed only if the scale is

approved and d is different from e

Display resolution OIML: Displayed only if the scale is not

approved or if d is different from e

NTEP: Displayed always

Approved weighing
device

Metrology display disabled,
Weights and Measures data must be
indicated on a label near the weight
display

Weight value

The weight value can be marked with the following symbols:

Symbol Information Remark

✱

Calculated weight value E.g., for average weighing results

–

Sign For negative weight values

Stability monitor For unstable weight values

1.2343 kg

Non-approved last digit
with e > d

For approved scales only
The example shows the weight value for a
scale with e = 1 g and d = 0.1 g
The last, smaller digit is not approved

12

METTLER TOL EDO User manual ICS649-check

12/10Order number 22021156A

Introduction

Symbols and info line

In the symbols and info line the following information can be displayed:

Symbol Information Remark

l<–>l

1

Weighing range For multi range or multi interval scales only

Scale number

Weight below
minimum weight

MinWeigh must be activated in the menu

Average weighing

Average must be activated in the menu

Automatic taring

Auto Tare must be activated in the menu

Automatic clearing
of the tare weight

A-Clear Tare must be activated in the
menu

Over/Under Check­weighing to zero

To zero must be assigned to a soft key in
the menu

TA

Take-away mode

Take away must be assigned to a soft key
in the menu

>0<

Center of zero
indication

Availability depending on local Weights and
Measures regulations

13

METTLER TOL EDO User manual ICS649-check12/10 Order number 22021156A

1.2.5 Keyboard

Key Name Function in the operating mode Function in the menu

Power • Switching on and off

• Cancel editing

• Cancel editing

• Exit menu

Clear • Clear tare

• Leave info page

• Clear value, clear digit

Switch • Switch over weight unit • Re-edit

• Switch over from numerics to upper/lower

case letters

Zero • Set scale to zero, clear tare

Tare • Tare scale, clear tare

Quick select • Opening Quick Select menu, e.g.,

for menu access, viewing log les or

logout

Info • Activate info screen

• Proceed to next info line / info page

• Freeze and release startup screen

Transfer • Transfer data to a printer or computer • Enter menu item

• Conrm entry/selection

<, >, ∧, ∨

Cursor keys • Navigating

• Alphanumeric entry

• Navigating

• Alphanumeric entry

14

METTLER TOL EDO User manual ICS649-check

12/10Order number 22021156A

Introduction

1.2.6 Soft keys

To meet your specic application requirements, ICS649-check offers 15 soft keys which
can be congured in the terminal menu. The soft keys are divided into three lines (pages).

Default setting

Set target Load target

ID1

Store target Identication 1

Reference n

Average piece

weight

Operating soft keys

➜ Press the key below the desired function.

Changing soft key line

➜ Press the cursor keys < or > to switch from line to line.

Page 1

Page 2

Page 3

Possible soft key settings

Symbol Menu setting Function

Target Enter Over/Under Checkweighing parameters

Recall Recall Over/Under Checkweighing parameters out

of the database

Store Store Over/Under Checkweighing parameters in the

database

TA Take away Activate/Deactivate Take-away mode

To zero Over/Under Checkweighing to zero

ID1, ID2, ID3 ID1, ID2, ID3 Enter identication 1, identication 2,

identication3

Reference n Determine the average piece weight

Average PW Enter the average piece weight

Switch scale Switch over weighing platform

15

METTLER TOL EDO User manual ICS649-check12/10 Order number 22021156A

1.2.7 Alphanumeric input

When an alphanumeric input is requested, the following is displayed:

1. Use the arrow keys <, >, ∧, ∨ to select the desired number.

2. Use to conrm the character and move to the next place.

3. Repeat steps 1 and 2 for further characters.

4. To nish input select  of the displayed keyboard and confirm with .

Using you can switch the displayed keyboard from upper case to lower case letters
and numerics, if applicable.

1.2.8 Connections

Weighing terminal only, ICS649a-check-.../f, ICS649a-check-.../t

1 Optional interface COM3
2 Optional interface COM2
3 Standard interface COM1 (RS232)
4 Weighing platform connection SCALE 1
5 Pressure compensation
6 AC power supply or battery charging
7 Verication securing seal
8 Optional weighing platform connection SCALE 2

16

METTLER TOL EDO User manual ICS649-check

12/10Order number 22021156A

Introduction

ICS649a-check-.../c
1 Optional interface COM2
2 Weighing platform connection
3 Pressure compensation
4 AC power supply or battery charging
5 Standard interface COM1 (RS232)

Note

The verication securing seal is applied on the weighing terminal as described in the

section above.

4

5

3

2

1

1.3 Tracing and tracking features

ICS649-check offers some advanced features for tracking and tracing operation on your
weighing terminal:

• User management

• Alibi log le

• Routine test and routine test log le

• Calibration weight management

1.3.1 User management

The user management of the ICS649-check allows you to manage up to 20 users by

• user name

• user prole (operator or supvervisor)

• user password

• user language

• user ID

When user management is activated, any access to the terminal is protected by password.
To enter the menu a password is no longer necessary.

• User management can be congured in the menu under Terminal –> User

Management.

• Login/logout with user management is described in chapter 2.

17

METTLER TOL EDO User manual ICS649-check12/10 Order number 22021156A

1.3.2 Alibilogle

If requested by national regulations, you can activate an alibi log le to trace all weighing

activities on the scale.

The alibi log le stores all weighings with the mandatory data. In addition you can store
up to 4 more items such as identications, serial numbers and user name.

• The alibi log le can be congured in the menu under Application –>

Log files.

• Viewing/printing/transferring of the alibi log le is described in the Quick Select menu.

1.3.3 Routinetestandroutinetestlogle

For optimum weighing results the device supports routine calibration tests.

You can congure routine tests by

• Interval (days)

• External test (for analog scales)

• Internal test (for scales with internal calibration weight)

For the external test for analog scales you can specify the following:

• Test weight (value)

• Weight name (to make sure you always use the same weight)

• Tolerance

• The routine test can be congured in the menu under Application –> Log files.

• Performing the routine test and viewing/printing/transferring of the routine test log le

is described in the Quick Select menu.

1.3.4 Calibration weight management

For veried scales the calibration results are stored in the calibration log.

Viewing/printing/transferring of the calibration log le is described in the Quick Select

menu.

18

METTLER TOL EDO User manual ICS649-check

12/10Order number 22021156A

Introduction

1.4 Commissioning

1.4.1 Selecting the weighing platform location

The correct location is crucial to the accuracy of the weighing results.

➜ Select a stable, vibration-free and, if possible, a horizontal location for the weighing

platform.
The ground must be able to safely bear the weight of the fully loaded weighing platform.

➜ Observe the following environmental conditions:

– No direct sunlight
– No strong drafts
– No excessive temperature uctuations

1.4.2 Levelling the weighing platform

Only weighing platforms that have been levelled precisely horizontally provide accurate
weighing results. Weights and Measures approved weighing platforms have a spirit level
to simplify levelling.

1. Turn the adjustable feet of the weighing platform until the spirit level’s air bubble is

inside the inner circle.

2. Tighten the lock nuts of the adjustable feet.

1.4.3 Weighing platform connection and interface commissioning

The weighing platform connection to the weighing terminal as well as the comminssioning
of the interfaces are described in the ICS4x9 installation instructions.

➜ Call the METTLER TOLEDO service technician or carry out commissioning in

accordance with the installation instructions.

19

METTLER TOL EDO User manual ICS649-check12/10 Order number 22021156A

1.4.4 Power supply connection

CAUTION
Risk of electric shock!

▲ Before connecting the power supply, check whether the voltage value printed on the

rating plate corresponds to your local system voltage.

▲ Do not under any circumstances connect the device if the voltage value on the rating

plate deviates from the local system voltage.

▲ Make sure the weighing platform has reached room temperature before switching on

the power supply.

➜ Plug the power plug into the power socket.

After it has been connected, the device runs a self-test. The device is ready to operate
when zero appears on the display.

1.4.5 Handling of the built-in storage battery

Note the following when operating a device with a built-in storage battery:

• The operating life depends on the intensity of use, the conguration and the connected

scale. For details see the technical data.

• The battery symbol shows the current state of charge of the storage battery.
– One segment corresponds with approx. 25 % capacity.
– If the symbol ashes, the storage battery has to be charged. A message is

displayed, too.

– During charging the segments are "running" until the battery is fully charged and

all segments light up continuously.

• The charging time of the storage battery amounts to approx. 6 hours.

If work is continued during the charging process, the charging time is extended.

• The storage battery is protected against overcharging.

• The storage battery has a service life of approx. 2 years or 500 to 1,000 charging/

discharging cycles.

• The storage battery is also suitable for permanent mains operation.

CAUTION
Danger of soiling because the charger for the storage battery is not protected to IP69K!

▲ Do not charge the device in humid or dusty rooms.
▲ After the storage battery has been charged, close the cover cap of the charging socket

at the device.

CAUTION
No success in charging the storage battery due to low temperatures!

▲ Do not charge the battery if the battery temperature is below 0 °C (32 °F). Charging

is not possible in this temperature range.

▲ Do not operate the battery charger outside its temperature range of 0 °C to 40 °C

(32°F to 104°F).

20

METTLER TOL EDO User manual ICS649-check

12/10Order number 22021156A

Introduction

Recommended use of the built-in storage battery

The characteristics mentioned above are only valid if the following recommendations are
observed:

• Connect the device to the battery charger as soon as the warning message "Lowbattery"
appears and the battery symbol starts ashing. When the message appeares you still
have enough time (at least 10minutes) to complete your current task.

• Keep the battery charger connected until the charging process is completed, i.e., all

segments of the battery symbol light up continuously.

• For optimum battery performance operate the device with built-in storage battery at an
ambient temperature in the range of 10 °C to 30 °C (50 °F to 86 °F). This applies to
discharging as well as charging the battery.

• If you plan to put the scale out of operation for a longer period, charge the battery
completely.

• Even if you do not use the instrument, charge the battery at least every 3months to

avoid deep discharge.

1.5 Use in hygienically sensitive areas

The device is easy to clean and is designed to be used in the food industry.

Features

• Suitability of the materials for contact with foodstuffs

• Construction made of stainless steel

• No open threads

• No screws with recesses

• Smooth, nonporous and at surfaces that are easy to clean

• Reduced horizontal surfaces

• Continuous welding seams

For further information please refer to the appendix.

21

METTLER TOL EDO User manual ICS649-check12/10 Order number 22021156A

2 Operation

2.1 Switching on and off

2.1.1 Switching on/off

➜ Press .

For a few seconds the device shows a start-up screen with device name, software
version, serial number of the weighing terminal and the Geo value (only if an analog
weighing device is connected).

• You can freeze the start-up screen by pressing

.

• When you start a weighing system with an analog scale the rst time, a message

is displayed: "Scale not calibrated". Call the METTLER TOLEDO service technician to
calibrate the scale.

• When user management is active, you are asked to select your name and enter the
corresponding password.

➜ Press .

Before the display goes out, -OFF- appears briey.

Switching on

Switching off

2.1.2 Login/logout

When user management is active, a login/logout procedure is required. The login screen
is displayed after switching on or logging out.

1. Select your name using the cursor keys ∧ / ∨ and confirm with .

2. Enter your password using the displayed keyboard.
A welcome screen and then the weight display appear.

1. Press to open the Quick Select menu.

2. Select Logout using the cursor keys ∧ / ∨ and confirm with .
A safety prompt is displayed.

3. Press .
The login screen is displayed, the current user is logged out.

Always log out when leaving the terminal in order to prevent unauthorised persons from
working on it.

Login

Logout

22

METTLER TOL EDO User manual ICS649-check

12/10Order number 22021156A

Operation

2.2 Zeroing / Zero point correction

Zeroing corrects the inuence of slight changes on the load plate or minor deviations from

the zero point.

1. Unload scale.

2. Press .
Zero appears in the display.

In case of nonveried scales, the automatic zero point correction can be deactivated in
the menu or the zero range can be changed. Approved scales are set xed to 0.5 d.

As standard, the zero point of the scale is automatically corrected when the scale is
unloaded.

• The zero function is only available within a limited weighing range.

• After zeroing the scale, the whole weighing range is still available.

• A successful zeroing will always delete a tare weight.

Manual

Automatic

2.3 Simple weighing

1. Place weighing sample on the scale.

2. Wait until the stability monitor goes out.

3. Read the weighing result.

2.4 Weighing with tare

2.4.1 Taring

➜ Place the empty container on the scale and press .

The zero display and the symbol NET appear.
The tare weight remains stored until it is cleared.

2.4.2 Clearing the tare

➜ Press .

The symbol NET goes out, the gross weight appears in the display.

If the symbol is displayed, i.e., the A-Clear Tare function is activated in the
menu under Scale -> Tare, the tare weight is automatically cleared as soon as the
scale is unloaded.

23

METTLER TOL EDO User manual ICS649-check12/10 Order number 22021156A

2.4.3 Automatic clearing of the tare

A tare weight is automatically cleared when the scale is unloaded.

Prerequisite

9 The symbol

is displayed, i.e., the tare function A-Clear Tare is activated in

the menu under Scale -> Tare.

2.4.4 Automatic taring

If you place a weight on an empty scale, the scale tares automatically and the symbol

NET is displayed.

Prerequisite

9 The symbol

is displayed, i.e., the tare function Auto Tare is activated in the

menu under Scale -> Tare.

The weight to be tared automatically, e.g., packaging material, must be heavier than

9display steps of the scale.

2.4.5 Chain tare

With this function it is possible to tare several times if, e.g., cardboard is placed between
individual layers in a container.

Prerequisite

9 The tare function Chain tare is activated in the menu under Scale –> Tare.

1. Place the rst container or packaging material on the scale and press

.
The packaging weight is automatically saved as the tare weight, the zero display and
the symbol NET appear.

2. Weigh the weighing sample and read/print out the result.

3. Place the second container or packaging material on the scale and press
again.
The total weight on the scale is saved as the new tare weight. The zero display
appears.

4. Weigh the weighing sample in the second container and read/print the result.

5. Repeat steps 3 and 4 for other containers.

24

METTLER TOL EDO User manual ICS649-check

12/10Order number 22021156A

Operation

2.4.6 Tare preset

If you know the weight of your containers, you can enter the tare weight via barcode or
SICS command. Thus you do not have to tare the empty container.

Prerequisite

9 For barcode use Tare preset is selected as destination for external input.

1. Enter the known tare weight via barcode or SICS command.
The weight display shows the negative tare weight and the symbol NET appears.

2. Place the full container on the weighing platform.
The net weight is displayed.

The entered tare weight is valid until a new tare weight is entered or the tare weight is
cleared.

2.5 Switching scales

Prerequisites

9 For manual totalisation the soft key (Switch scale) is activated in the menu

under Terminal –> Device –> Keyboard –> Softkeys.

➜ Press the soft key to switch from scale 1 to scale 2 or vice versa.

The current active scale is displayed in the symbol and info line on the top of the
display.

2.6 Printing results

If a printer or computer is connected, weighing results and other information can be printed
out or transferred to a computer.

➜ Press .

The dened data is printed out or transferred to the computer.

The printout content can be dened in the Templates menu.

25

METTLER TOL EDO User manual ICS649-check12/10 Order number 22021156A

2.7 Totalising

2.7.1 Totalising manually
Prerequisites

9 Application -> Totalise is activated in the menu.
9 For manual totalisation the soft keys + (Plus) and S (Total) must be activated in the

menu under Terminal –> Device –> Keyboard –> Softkeys.

9 If you want to follow the totalisation on the display, activate Total net and/or n

for the auxiliary lines and/or the info key (Terminal –> Device –> Display

–> Auxiliary lines or Terminal –> Device –> Keyboard –>
Info key).

Totalising

1. Weigh the rst sample and press the soft key

+.

If activated, the total net and the number of items are displayed.

2. Unload the scale.

3. Load the next sample and press the soft key + again.

If activated, the total net and the number of items are increased.

4. Unload the scale.

5. Repeat steps 3 and 4 for further items.

6. To nish totalising, press the soft key S.

A safety prompt is displayed.

7. Press softkey YES to clear the total.

– or –
Press softkey NO to continue totalising.

Piece counting results and Over/Under Checkweighing results can be totalised the same
way.

26

METTLER TOL EDO User manual ICS649-check

12/10Order number 22021156A

Operation

2.7.2 Automatic totalising
Prerequisites

9 Application -> Totalise is activated in the menu.
9 Good print is activated in OverUnder Checkweighing.

– or –
Auto print is activated for other weighing applications.

9 For clearing the total, the soft key S (Total) must be activated in the menu under

Terminal –> Device –> Keyboard –> Softkeys.

9 If you want to follow the totalisation on the display, Total net and/or n must

be activated for the auxiliary lines and/or the info key (Terminal –> Device

–> Display –> Auxiliary lines or Terminal –> Device –>
Keyboard –> Info key).

Totalising

1. Weigh the rst sample.

The result is printed out automatically and total net and n are updated.
If activated, the total net and the number of items are displayed.

2. Unload the scale.

3. Load the next sample.

If activated, the total net and the number of items are increased.
The result is printed out automatically and total net and n are updated.

4. Unload the scale.

5. Repeat steps 3 and 4 for further items.

6. To nish totalising, press the soft key

S.

A safety prompt is displayed.

7. Press softkey YES to clear the total.

– or –
Press softkey NO to continue totalising.

Piece counting results and OverUnder Checkweighing results can be totalised the same
way.

27

METTLER TOL EDO User manual ICS649-check12/10 Order number 22021156A

2.8 Average (dynamic) weighing

With the average weighing function, it is possible to weigh restless weighing samples
such as living animals. If this function is activated, is displayed in the info line.
With average weighing, the scale calculates the mean value from 56 weighing operations
within 4 seconds.

9 Average -> Manual is selected in the menu.
9 Weighing sample heavier than 9 scale divisions.

1. Place the weighing sample on the scale.

2. Press to start average weighing.

3. During average weighing, stars appear in the display, and the average result will be
displayed with the symbol ✱.

4. Unload the scale to be able to start a new average weighing operation.

9 Average -> Auto is selected in the menu.
9 Weighing sample heavier than 9 scale divisions.

1. Place the weighing sample on the scale.
Average weighing starts automatically.
During average weighing, stars appear in the display, and the average result will be
displayed with the symbol ✱.

2. Unload the scale to be able to perform a new average weighing operation.

With manual start

With automatic start

2.9 Piece counting

2.9.1 Piececountingwithaxednumberofreferencepieces

Prerequisite

9 The corresponding soft key is activated in the terminal menu.

1. Apply the reference parts (factory setting: 10 pieces) and press .
The number of reference pieces is displayed.

2. Load the parts to be counted.
The number of pieces is displayed.

• The average weight remains stored until a new reference is determined.

• The number of reference parts can be set in the application menu.

• The auxiliary line and the info page can be congured to show the average piece

weight.

28

METTLER TOL EDO User manual ICS649-check

12/10Order number 22021156A

Operation

2.9.2 Piece counting with a known piece weight
Prerequisite

9 The corresponding soft key is activated in the terminal menu.

1. Press .

Input of the average piece weight (APW) is requested.

2. Enter the average piece weight.

The weight unit changes to PCS.

3. Load the parts to be counted.

The number of pieces is displayed.

• The average piece weight remains stored until a new average piece weight is de-

termined.

• You can enter the average piece weight via barcode if the external input destination is

congured to "Average PW".

2.9.3 Terminating piece counting

➜ Press .

"Cleared" appears in the display.
The average piece weight is cleared and the weight value is displayed.
The device operates in straight weighing mode.

29

METTLER TOL EDO User manual ICS649-check12/10 Order number 22021156A

2.10 Workingwithidentications

Weighing series can be assigned 3 identication numbers ID1, ID2 and ID3 with up to
40characters that are also printed out in the protocols. If for example a customer number

and an article number are assigned, it can be clearly seen in the protocol which article
was weighed for which customer.

Direct entry

9 At least one of the soft keys ID1, ID2 or ID3 is activated.

1. Press the desired soft key ID1, ID2 or ID3.
The last entered ID is displayed.

2. To edit the ID press the soft key

.

3. Enter the ID using the displayed alphanumeric keyboard.

4. Conrm entry with  of the displayed keyboard.

The entered ID is assigned to the following weighings until the ID is changed.

Barcodeuse(foroneidenticationonly)

9 ID1, ID2 or ID3 is selected as destination for external input.
9 To display the identication ID1, ID2 or ID3 is activated in the auxiliary line.

UsingSICScommandset(uptothreeidentications)

9 To display the identication(s) the corresponding IDs are activated in the auxiliary line.

2.11 Displaying information

Up to 27 different values for display can be congured in the menu for the info key.
Depending on the conguration in the menu Terminal –> Device –> Keyboard

–> Info key, the following data can be assigned in a free order, e.g.,

• Date & Time

• Weight values

• Identications

• Device information

• Serial numbers and software versions

• User name

1. Press .

The (rst) info screen is displayed.

2. Press again.
With one info screen only, the weight display appears.
With several info screens, the next info screen is displayed.

3. With several info screens press to leave the info screens.

An info screen is displayed until is pressed again or is pressed.

30

METTLER TOL EDO User manual ICS649-check

12/10Order number 22021156A

Operation

2.12 Environment and cleaning

2.12.1 Overview

The devices are designed to be used in a wet environment. Depending on the environment
and the cleaning procedures we suggest weighing platforms with different types of
load cells. The following table gives you a detailed overview about the recommended
environment and suitable cleaning procedures.

Terminal Weighing platform

ICS649a-check
ICS649d-check

Standard version

hermetically sealed
stainless steel load cell

Option

load cell with
KS+ coating

IP rating IP68/IP69k IP68/IP69k IP68/IP69k

Environment

Short time wet (30 min / day)

✔ ✔ ✔

Part time wet (120 min / day)

✔ ✔ ✔

Permanent wet

✔ ✔ ✔

Cleaning procedure

Wet wipe down

✔ ✔ ✔

Light hose down
< 5 l / min, 20 kPa

✔ ✔ ✔

Light wash down
< 12.5 l / min, 30 kPa

✔ ✔ ✔

Heavy wash down
high pressure water and
steam jet up to 10000 kPa

✔ ✔ ✔

Cleaning detergents

Mild detergents

✔ ✔ ✔

Other detergents in
accordance with the

manufacturer's specications

and instructions

✔ ✔ ✔

Acids, lyes, solvents – –

✔