Mettler Toledo ICS445a, ICS435a, ICS425d, ICS435d, ICS445d Quick Manual

ICS425a
ICS425d

ICS435a
ICS435d

ICS445a
ICS445d

ICS4_5d-...XS/f
ICS4_5k-...XS/f
ICS4_5k-...XS/DR/f

ICS4_5d-...SM/f
ICS4_5k-...SM/f
ICS4_5k-...SM/DR/f

ICS4_5d-...LA/f
ICS4_5k-...LA/f
ICS4_5k-...LA/DR/f

ICS465a
ICS465d

Quick Guide

ICS4_5

Weighing terminals

Compact scales

Congratulations on choosing the quality and precision of METTLER TOLEDO. Proper use
according to these instructions and regular calibration and maintenance by our factory­trained service team ensure dependable and accurate operation to protect your investment.
Contact us about a ServiceXXL agreement tailored to your needs and budget.

We invite you to register your product at

www.mt.com/productregistration

so we can contact you about enhancements, updates and important notications concern

ing your METTLER TOLEDO product.

2

METTLER TOL EDO Quick Guide ICS4_5

04/12Order number 22023416A

3

METTLER TOL EDO Quick Guide ICS4_504/12 Order number 22023416A

1 Documentation

In addition to this printed Quick Guide you are supplied a CD-ROM with the following
contents:

• User manuals

• Data sheets

• Videos

• Brochures

2 Safety instructions

General

▲ Do not use the device in a hazardous environment. Special devices are available in

our range of products for hazardous environments.

▲ The safety of the device cannot be ensured if it is not operated in accordance with

these operating instructions.

▲ Only authorised personnel may open the device.

Devices with protection level IP65

Devices with protection level IP65 are dust-tight and protected from water jets according to
EN 60529. They are suitable for use in dusty environment and brief contact with liquids.

▲ Ensure that the device is dried off again after coming into contact with liquid.
▲ Do not use the device in environments with a risk of corrosion.
▲ Do not ood the device or submerge it in liquid.

Devices with built-in power supply unit

▲ Ensure that the power socket outlet for the device is earthed and easily accessible, so

that it can be de-energised rapidly in emergencies.

▲ Ensure that the supply voltage at the installation site lies within the range of 100V

to 240V.

▲ Check the power cable regularly for damage. If it is damaged, immediately disconnect

the device from the power supply unit.

Devices with built-in storage battery

▲ Only use storage batteries from the manufacturer.
▲ Do not use the battery charger in humid or dusty rooms or below 0 °C (32 °F)

ambient temperature.

▲ After the storage battery has been charged, the cover cap of the charging socket at the

device must be closed.

Compact scales

▲ Avoid falling loads, shock loads as well as impacts from the side.