Mettler Toledo ICS429a, ICS429d, ICS439a, ICS449a-check, ICS439d Quick Manual
...
ICS429a / ICS429d
ICS4x9a-.../f
ICS4x9a-.../t
ICS439a / ICS439d
ICS449a-check
ICS449d-check
ICS469a-check
ICS469d-check
ICS4x9a-.../c
Quick Guide
ICS4x9
Weighing terminals
Terminal and platform combinations
Service XXL
Congratulations on choosing the quality and precision of METTLER TOLEDO. Proper use
according to these instructions and regular calibration and maintenance by our factorytrained service team ensure dependable and accurate operation to protect your investment.
Contact us about a ServiceXXL agreement tailored to your needs and budget.
We invite you to register your product at
www.mt.com/productregistration
so we can contact you about enhancements, updates and important notications concern
ing your METTLER TOLEDO product.
2
METTLER TOL EDO Quick Guide ICS4x9
11/10Order number 22019684A
3
METTLER TOL EDO Quick Guide ICS4x911/10 Order number 22019684A
1 Safety instructions
General
▲ Do not use the device in an hazardous environment! Special devices are available in
our range of products for hazardous environments.
▲ The safety of the device cannot be ensured if it is not operated in accordance with
these operating instructions.
▲ Only authorised personnel may open the device.
Devices with built-in power supply unit
▲ Ensure that the power socket outlet for the device is earthed and easily accessible, so
that it can be de-energised rapidly in emergencies.
▲ Ensure that the supply voltage at the installation site lies within the range of 100V
to 240V.
▲ Check the power cable regularly for damage. If it is damaged, immediately disconnect
the device from the power supply.
▲ Ensure that there is a space of at least 3 cm (1.25") at the rear in order to prevent the
power cable from being bent too strongly.
Devices with built-in storage battery
▲ Do not use the battery charger in humid or dusty rooms or below 0 °C (32 °F)
ambient temperature.After the built-in storage battery has been charged, the cover cap
of the charging socket at the device must be closed.
Terminal and platform combinations
▲ The maximum static safe load must never be exceeded. Observe the operation limits,
see Technical data.
▲ Avoid falling loads, shock loads as well as impacts from the side.
2 Documentation
In addition to this printed Quick Guide you are supplied a CD-ROM with the following
contents:
• User manuals
• Installation information
• Mounting instructions
• Data sheets
• Additional information
• Software
• Videos
• Brochures
Loading...