ICS425a
ICS425d
ICS435a
ICS435d
ICS445a
ICS445d
ICS4_5d-...XS/f
ICS4_5k-...XS/f
ICS4_5k-...XS/DR/f
ICS4_5d-...SM/f
ICS4_5k-...SM/f
ICS4_5k-...SM/DR/f
ICS4_5d-...LA/f
ICS4_5k-...LA/f
ICS4_5k-...LA/DR/f
ICS465a
ICS465d
Quick Guide
ICS4_5
Weighing terminals
Compact scales
Congratulations on choosing the quality and precision of METTLER TOLEDO. Proper use
according to these instructions and regular calibration and maintenance by our factorytrained service team ensure dependable and accurate operation to protect your investment.
Contact us about a ServiceXXL agreement tailored to your needs and budget.
We invite you to register your product at
www.mt.com/productregistration
so we can contact you about enhancements, updates and important notications concern
ing your METTLER TOLEDO product.
2
METTLER TOL EDO Quick Guide ICS4_5
04/12Order number 22023416A
3
METTLER TOL EDO Quick Guide ICS4_504/12 Order number 22023416A
1 Documentation
In addition to this printed Quick Guide you are supplied a CD-ROM with the following
contents:
• User manuals
• Data sheets
• Videos
• Brochures
2 Safety instructions
General
▲ Do not use the device in a hazardous environment. Special devices are available in
our range of products for hazardous environments.
▲ The safety of the device cannot be ensured if it is not operated in accordance with
these operating instructions.
▲ Only authorised personnel may open the device.
Devices with protection level IP65
Devices with protection level IP65 are dust-tight and protected from water jets according to
EN 60529. They are suitable for use in dusty environment and brief contact with liquids.
▲ Ensure that the device is dried off again after coming into contact with liquid.
▲ Do not use the device in environments with a risk of corrosion.
▲ Do not ood the device or submerge it in liquid.
Devices with built-in power supply unit
▲ Ensure that the power socket outlet for the device is earthed and easily accessible, so
that it can be de-energised rapidly in emergencies.
▲ Ensure that the supply voltage at the installation site lies within the range of 100V
to 240V.
▲ Check the power cable regularly for damage. If it is damaged, immediately disconnect
the device from the power supply unit.
Devices with built-in storage battery
▲ Only use storage batteries from the manufacturer.
▲ Do not use the battery charger in humid or dusty rooms or below 0 °C (32 °F)
ambient temperature.
▲ After the storage battery has been charged, the cover cap of the charging socket at the
device must be closed.
Compact scales
▲ Avoid falling loads, shock loads as well as impacts from the side.
4
METTLER TOL EDO Quick Guide ICS4_5
04/12Order number 22023416A
Operation
Press and hold the key until OFF
is displayed.
Zeroing corrects the inuence of
slight changes on the load plate
or minor deviations from the zero
point.
3 Operation
The following illustrations are arranged in two columns:
• left side state of the scale or keystroke
• right side corresponding display
3.1 Switching on/off
3.2 Zeroing
3.3 Straight weighing
Switching on
Switching off
5
METTLER TOL EDO Quick Guide ICS4_504/12 Order number 22023416A
3.4 Taring
3.5 Printing or transferring data
3.6 Switching weight unit
When the scale is tared, the NET
symbol is displayed.
When the tare is cleared, the
gross weight is displayed.
6
METTLER TOL EDO Quick Guide ICS4_5
04/12Order number 22023416A
Cleaning
4 Cleaning
Risk of electric shock
▲ Before cleaning, unplug the power plug in order to disconnect the terminal from the
power supply.
▲ Cover open connectors with protective caps.
• Clean the protective cover separately. The protective cover is dishwasher-safe.
• Take off the load plate and remove any dirt and foreign substances which may have
collected underneath. Do not use any hard objects to do so.
• Do not disassemble the weighing device.
• Remove any possibly remaining detergent by rinsing with clear water.
• Observe all the existing regulations on cleaning intervals and permissible cleaning
agents.
Cleaning of other weighing platforms than described in this user manual
➜ Make sure to observe the cleaning instructions for the connected weighing platform.
The weighing platform may not be designed for the environments and cleaning
procedures described above.
5 Disposal
In conformance with the European Directive 2002/96 EC on Waste Electrical and Electronic
Equipment (WEEE), this device may not be disposed of with domestic waste. This also
applies to countries outside the EU, according to their specic requirements.
Please dispose of this product in accordance with local regulations at the collecting point
specied for electrical and electronic equipment.
If you have any questions, please contact the responsible authority or the distributor from
which you purchased this device.
Should this device be passed on to other parties (for private or professional use), the
content of this regulation must also be related.
Thank you for your contribution to environmental protection.
7
METTLER TOL EDO Quick Guide ICS4_504/12 Order number 22023416A
Documentation
CD-ROM
For more information
www.mt.com/service
Subject to technical changes
© 04/2012 Mettler-Toledo (Albstadt) GmbH
Printed in Germany
Order number 22023416A
Mettler-Toledo (Albstadt) GmbH
D-72458 Albstadt
Tel. + 49 7431-14 0
Fax + 49 7431-14 232
To protect your METTLER TOLEDO
product’s future:
METTLER TOLEDO Service XXL assures
the quality, measuring accuracy and
preservation of value of all METTLER
TOLEDO products for years to come.
Please send for full details about our
attractive terms of service.
Thank you.
*22023416A*
* 2 2 0 2 3 4 1 6 A *
Loading...