Mettler Toledo ACM360-B0 User Manual

User Manual

ACM360-B0

Bluetooth Adapter

2 METTLER TOLEDO Technical Manual ACM360-B0 06/2017

Warnings and Cautions

Congratulations on choosing the quality and precision of METTLER TOLEDO. Proper use of
your new equipment according to this User manual and regular calibration and
maintenance by our factory-trained service team ensures dependable and accurate
operation, protecting your investment. Contact us about a service agreement tailored to
your needs and budget. Further information is available at
www.mt.com/service.

There are several important ways to ensure you maximize the performance of your
investment:

1. Register your product: We invite you to register your product at

www.mt.com/productregistration
so we can contact you about enhancements, updates and important notifications
concerning your product.

2. Contact METTLER TOLEDO for service: The value of a measurement is proportional to

its accuracy – an out of specification scale can diminish quality, reduce profits and
increase liability. Timely service from METTLER TOLEDO will ensure accuracy and
optimize uptime and equipment life.

- Installation, Configuration, Integration and Training:

Our service representatives are factory-trained, weighing equipment experts. We
make certain that your weighing equipment is ready for production in a cost
effective and timely fashion and that personnel are trained for success.

- Initial Calibration Documentation:

The installation environment and application requirements are unique for every
industrial scale so performance must be tested and certified. Our calibration
services and certificates document accuracy to ensure production quality and
provide a quality system record of performance.

- Periodic Calibration Maintenance:

A calibration Service Agreement provides on-going confidence in your weighing
process and documentation of compliance with requirements. We offer a variety
of service plans that are scheduled to meet your needs and designed to fit your
budget.

06/2017 METTLER TOLEDO Technical Manual ACM360 3

Safety Instructions

Do not use the device in hazardous environment!
The safety of the device cannot be ensured if it is not operated in accordance with the
operating instructions and if it is not serviced in accordance with this service manual.
Only authorized personnel may open the device.
Please avoid impact and heavy shock.
Do not submerge or use in wash down environment.

FCC Statment

This device complies with part 15 of the FCC rules.

1.1 FCC Part 15.105 (b)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment OFF and ON, the user is encouraged to try to correct the
interference by one or more of the following measures:

Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected

Consult the dealer or an experienced radio/TV technician for help .

1.2 FCC Part 15.19(a)(3)
Conditions for Use:
This device complies with Part15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.

1.3 FCC Part 15.21
Note:The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modifications to this equipment. Such modifications could void the user’s

authority to operate the equipment.

1.4 FCC Part 2.1093
To satisfy FCC RF exposure requirements for mobile and base station transmission devices, a
separation distance of 20 cm or more should be maintained between the antenna of this
device and persons during operation. To ensure compliance, operation at closer than this
distance is not recommended. The antenna(s) used for this transmitter must not be co­located or operating in conjunction with any other antenna or transmitter.

4 METTLER TOLEDO Technical Manual ACM360-B0 06/2017

Warnings and Cautions

Disposal of Electrical and Electronic Equipment

In conformance with the European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE) this device may not be
disposed of in domestic waste. This also applies to countries
outside the EU, per their specific requirements.

Please dispose of this product in accordance with local regulations
at the collecting point specified for electrical and electronic
equipment.

If you have any questions, please contact the responsible authority or the distributor from
which you purchased this device.

Should this device be passed on to other parties (for private or professional use), the
content of this regulation must also be related.

Thank you for your contribution to environmental protection.

○C METTLER TOLEDO 2017

No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying and recording, for any purpose without
the express written permission of METEELER TOLEDO.
U.S. Government Restricted Rights: This documentation is furnished with Restricted Rights.

Copyright 2017 METTLER TOLEDO. This documentation contains proprietary information of
METTLER TOLEDO. It may not be copied in whole or in part without the express written
consent of METTER TOLEDO.
METTLER TOLEDO reserves the right to make refinements or changes to the product or
manual without notice.

COPYWHIGHT

METEELER TOLEDO

○

R

is a registered trademark of Metteler-Toledo, LLC. All other brand or

product names are trademarks or registered trademarks of their respective companies.

METTLER TOLEDO RESERVES THE RIGHT TO MAKE

REFINEMENTS OR CHANGES WITHOUT NOTICE.

06/2017 METTLER TOLEDO Technical Manual ACM360 1

Contents

1. Introduction ........................................................................................................................................... 2

1.1 Product specifications..................................................................................................................................... 2

1.2 Name Rule ................................................................................................................................................... 2

1.3 How to use it................................................................................................................................................. 2

2. Installation ............................................................................................................................................ 3

2.1 Environment ................................................................................................................................................. 3

2.2 Factory setting ............................................................................................................................................... 3

3. Operation .............................................................................................................................................. 3

3.1 Important information ..................................................................................................................................... 3

3.2 Pairing ......................................................................................................................................................... 3

3.3 Work Mode ................................................................................................................................................... 5

3.4 Print template ................................................................................................................................................ 5

3.5 Transmission mode ....................................................................................................................................... 6

3.6 Factory reset ................................................................................................................................................. 6

4. ACM360 Applications............................................................................................................................. 8

4.1 Standard Communication - 1:1 pairing ............................................................................................................. 8

4.2 Standard Communication - multi:1 pairing ......................................................................................................... 8

4.3 ZPL template printing - 1:1 pairing ................................................................................................................... 9

4.4 ZPL template printing - Multi:1 pairing ............................................................................................................... 9

4.5 Smart Device Standard Communication – 1:1 or multi :1 ................................................................................... 10