MetroVac PRO83BA User Manual

VAC N BLO CAR VAC

PRO SERIES

INSTRUCTION MANUAL

MODEL

PRO-83BA

DELIBERATELY MADE BETTER IN THE U.S.A®

Before using, check your plug to make sure it is the proper voltage
for your country.

UK plug 220-240 volt

EURO plug 220-240 volt

AUSTRALIAN PLUG 220-240

USA plug 110-120 can also be used in JAPAN

VAC N BLO CAR VAC

PRO SERIES

Model PRO-83BA

A. 4.0 HP, Dual Power, Twin Fan Motor (MVC-157D)
B. Four 6 ft. Hoses (24 ft.) (MVC-202A)
C. Crevice Tool (MVC-188)
D. Air Concentrator (MVC-196AA)
E. Dust Brush (MVC-206B)
F. Pik-All Nozzle (MVC-185A)
G. Inflator Adaptor (MVC-211D)
H. 9 inch Swivel Brush (MVC-190B)
I. Two 20 inch Extension Wands (MVC-172A)
J. Mini Attachment Kit (MVC-212)
K. Shoulder Strap (MVC-49C)
L. Wall Mounting Bracket (MVC-331)
M. Attachment Bag (MVC-51C)
N. Hose Bracket (MVC-51D)

DELIBERATELY MADE BETTER IN THE U.S.A®

***READ ALL INSTRUCTIONS BEFORE USE***

VAC N BLO CAR VAC PRO SERIES

Model PRO-83BA

The PRO-83BA can be mounted to a wall with the wall mount bracket
(MVC-331). Ideally, the center holes should be used to mount the bracket
directly into a stud with the screws shown below. Mollies can be used to
secure mounting bracket to sheet rock if a wall stud is inaccessible. Level
wall mount bracket in desired position and mark screw locations within
screw holes. Once bracket is securely mounted, the VAC N BLO can be
hung by the wheel axle located on the suction side.

DELIBERATELY MADE BETTER IN THE U.S.A®