METROPOLITAN VACUUM CLEANER CO ADM-4PNHSF, ADM-1PNH, ADM-4PNH, TU-10-3H, TU-10-4H Instruction Manual

CAUTION

1. If your vacuum cleaner has suction but does not clean when hose is
attached – remove the hose from the suction end of vacuum cleaner and
insert it into the blowing (exhaust) end near the switch. Blow out the
hose sometimes it might clog.

2. When using disposable paper bags, dispose when bag is no more than
half full. Do not use disposable paper bag without permanent cloth bag.
To extend the life, efficiency and performance of your vacuum cleaner
use only genuine disposable filter bags. (part# TM-215-10B)

3. Foam filter should be replaced three times a year. (part# MVC-56F)

4. HEPA Filter– Check for discoloration and replace (part# MVC-51B)

(not included in all models)

METRO HOME CLEANING SYSTEM

5 YEAR “NO FAULT” LIMITED MOTOR WARRANTY

The METRO motor is so durable and precision built it is guaranteed against defects in
material and workmanship for a period of five years, regardless of fault.

Should the METRO motor, in any way, fail to give satisfactory performance within 5
years from date of purchase, we will repair or replace the motor free of charge, if
returned to the factory, freight or postage prepaid. Please include $20.00 to cover the
cost of return shipment, insurance and handling.

LIMITED 1 YEAR WARRANTY

The METRO Home Cleaning System is guaranteed to be free from defects in
workmanship and material for one year from date of purchase. The company agrees
to repair or replace any parts, under this guarantee, which may become defective
under normal and proper use, if returned to the factory, freight or postage prepaid.
Please include $20.00 to cover the cost of return shipment, insurance and handling.
Corrections of such defects by repair or replacement shall constitute fulfillment of all
obligations with respect to the appliance sold hereunder.

IMPORTANT: Do not tamper with or attempt to take this appliance apart. Such
action will void this warranty.

To validate warranty, registry card must be mailed within 10 days after purchase date.

METROPOLITAN VACUUM CLEANER CO., INC.

ONE RAMAPO AVENUE

P.O. BOX 149

SUFFERN, NEW YORK 10901

800-822-1602 / www.metrovacworld.com

Form: ADM-4PNHSF

METROPOLITAN

PROFESSIONAL & TURBOTRONIC

HOME CLEANING SYSTEM

With Electric Power Nozzle

INSTRUCTION MANUAL

For Models:

ADM-4PNHSF,

ADM-1PNH, ADM-4PNH

TU-10-3H AND TU-10-4H

#3BErgo Handle with
ON/OFF Switch,
& Air Flow Control

#4A Push Button Locking
Wands With Cord Channel

#3 Electric
Power Hose

Suction End Cap

# 4 Electric
Power Nozzle

#5 & #6 Power Nozzle
Cord

#3A Electric Hose
Power Supply Cord

#2 Two Speed HI/LOW
ON/OFF Switch.
(Blower End)

#7 ON/OFF Switch For
Revolving Brush

INTRODUCING THE NEW

“METROPOLITAN PROFESSIONAL” LINE

In the major appliance industry, stainless steel has
quickly become the trademark of quality, professionally
engineered, consumer products that look and perform as if
they were being utilized in a commercial environment.

This was our goal in designing the “Metropolitan
Professionals” line of Stainless Steel/Chrome Floor Care
Products. Inside the sleek exterior, you will find the
quality, performing components that has built the
Metropolitan Vacuum Cleaner Company, Inc. reputation.
Up to 4.0 Peak Horsepower and Six Layer HEPA Filtration
provide you with unsurpassed performance.

HOME CLEANING SYSTEM

Model ADM-4PNHSF

INSTRUCTION MANUAL

1. Insert male plug from vacuum into electrical outlet.

2.

Start appliance by pushing the toggle switch from “Off”
position to “On”. Note: On the ADM-4PNHSF model push
toggle switch from “Off” position to “Low” or “High” speed.

3.

Electric Hose: Connect the electric hose by inserting the short,
straight coupling into the suction end of the power unit. Depress
the buttons on coupling to insert and remove hose. (#3A) Plug
in power supply cord from electric hose into power nozzle
receptacle on power unit. “On/Off” switch on ergonomically
correct pistol grip allows you to go from carpet to bare floors
with a flick of a switch. (See figure #3B)

4.

“Electric” Power Nozzle: Assemble electric power nozzle by
fitting chrome push button extension wands (#4A) into power
nozzle neck.

5.

Snap power nozzle power cord into channel on push button
extension wands.

6.

Plug power nozzle power cord into receptacle on hose handle.

7.

Depressing “pedal” on electric power nozzle, disengages the
revolving brush, while the headlight remains on allowing you to
go from carpet to bare floors. (See figure #7)

8.

Combo Carpet/ Floor Tool: Attach to the steel chrome
extension wands to clean carpeting. Depress pedal for bare
floors or carpeting. The swivel action permits proper contact
with all surfaces. (Not included in all models)

9.

Floor & Wall Brush: Used with extension wands for cleaning
walls, hardwood, tile , cement or linoleum surfaces
(not included in all models).

10. Crevice Tool: Cleans those hard-to-reach, tight places such as

radiators, pianos, baseboards and around the cushions of
upholstered furniture.

11. Dusting Brush: Long soft bristles gently loosen dust on
furniture, lamp shades, blinds, picture frames, moldings, etc.

12. Upholstery Nozzle: Cleans upholstered furniture, draperies,
mattresses, pillows, clothing, furs, automobile interiors