Metro CASE-L24(P) User Manual
®
Item # ______________________________________________
®
®
METRO CASE CARTS
The functional design of Metro Case Carts maximize
usable inside space for handling storage and transport
tasks efficiently. Carts can be used wherever contents
must be protected from an “unclean” environment,
including free-standing ambulatory care centers, surgicenters, and hospital based or out-patient surgeries.
• Accessible: Wire roller shelf extends out half way, easily
and quietly, even at lowest level where accessibility is
vital. Also available in solid or wire without roller.
• Efficient: Brackets, which hold shelves, attach and
detach quickly from “keyhole” slots for easy shelf
adjustablity at 2" increments.
• Easily Maneuverable: Full length handles on both sides
of the low profile carts and CASE-H36 allow for pushing
or pulling from either end and provide better cart control.
One full length handle is ergonomically located on the
CASE-H24 cart.
• Independent Caster Channel System: A separate
caster channel on each side of the cart means having
to replace only one caster channel should a damaging
Job ________________________________________________
situation occur. With competitive models, the entire dolly
would have to be replaced, given the same situation.
• Durable: Double-panel door construction offers better
strength and minimizes maintenance. Stainless steel
cabinet and optional shelves have “safety edges” to
eliminate ripping of packs.
• Cleans Easily: Stainless steel construction makes
units cart washable. Shelves and brackets remove
for washing. Weep hole at the cart’s front corners and
underside of door panels facilitate drainage and drying.
• High-Profile Model Available: The high-profile models
(CASE-H24, CASE-H36) save floor space, as compared
to conventional case carts. The vertical design eliminates
“stooping” and offers quick, easy “stand-up” access to
most contents.
• Choice of Casters: Metro case carts are available
with either stainless steel casters or maintenance free
polymer casters. Both are non-corrosive and cartwashable. The polymer caster also provide a swivel lock
as a standard feature.
Metro Case Carts
CASE-L24
CASE-H24
CASE-L36
*Shelves ordered separately.
InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
CASE-H36*
CASE-L48
33.10
Job ________________________________________________
®
®
®
33.10
METRO CASE CARTS
Specifications
• Cart: Type 304 Stainless Steel, No. 3 finish type.
• Shelves: Stainless Steel, wire (with or without roller) or
solid, sold separately.
• Bumper: Replaceable stand-out wraparound with
reinforced corners
• Custom Orders:
- Extended tops for use as a back table
- Tote boxes
- Carts modified for elevator coupler systems
- Carts modified for mobile assist devices.
- Custom sizes or design
- Over-the-road models
- Security seal lock on doors
- Various caster options
• Casters:
Stainless Steel: one swivel lock, two swivel with brake,
one swivel on 48" model; three swivel, one swivel with
brake on other models.
- Polyurethane wheels and stainless steel horn
- All stainless steel hardware and top plate
- Zerk fittings with grease sealed bearings
- 5" (127mm) diameter, 11/2" (38mm) face (NOTE: CASEH36 equipped with 6" (152mm) diameter, 11/2" face
casters).
Polymer: one swivel lock, two swivel with brake, one
swivel on all models.
- Advantage Thermal Plastic Rubber wheels and
reinforced nylon horn
- All stainless steel hardware and top plate
- Self Lubricating Delrin bearing
- 5" (127mm) diameter, 11/4" (32mm) round face (NOTE:
CASE-H36P equipped with 6" (152mm) diameter, 11/2"
(38mm) face casters).
Metro Case Carts
Dimensions
Case Carts (shelves sold separately)
Cat. No. Cat. No.
Width Height Approx. with with
Overall Cabinet Overall Cabinet Pkd. Wt. Stainless Polymer
(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg) Casters Casters
327/8 835 281/2 724 381/4 972 281/2 724 115 52.27 CASE-L24 CASE-L24P
447/8 1140 281/2 724 381/4 972 281/2 724 186 84.5 CASE-L36 CASE-L36P
567/8 1445 281/2 724 381/4 972 281/2 724 212 96.4 CASE-L48 CASE-L48P
327/8 835 281/2 724 571/8 1451 461/2 1181 162 73.6 CASE-H24 CASE-H24P
447/8 1140 281/2 724 581/8 1476 461/2 1181 262 118.8 CASE-H36 CASE-H36P
All units are 281/2" (724mm) deep overall. Cabinet depth is 251/2" (648mm).
Optional Shelves (wire pullout, wire pullout with rollers, solid)
Approx. Approx. Approx.
Pkd. Wt. Pkd. Wt. Pkd. Wt.
Shelf Size (with 2 brackets) Cat. No. (with 2 brackets) Cat. No. (with 2 brackets) Cat. No.
Cart (in.) (mm) (lbs.) (kg) Wire Shelf (lbs.) (kg) Roller Shelf (lbs.) (kg) Solid Shelf
CASE-L24(P) 24x24 610x610 9 4.1 CCWS-24 12 5.5 CCROLWS-24 15 6.8 CCSS-24
CASE-L36(P) 24x36 610x914 13 5.9 CCWS-36 16 7.3 CCROLWS-36 19 8.6 CCSS-36
CASE-L48(P) 24x48 610x1219 19 8.6 CCWS-48 21 9.5 CCROLWS-48 25 11.3 CCSS-48
CASE-H24(P) 24x24 610x610 9 4.1 CCWS-24 12 5.5 CCROLWS-24 15 6.8 CCSS-24
CASE-H36 24x36 610x914 13 5.9 CCWS-36 16 7.3 CCROLWS-36 19 8.6 CCSS-36
Each shelf includes two attachment brackets.
Manufactured by:
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
Phone: 570-825-2741 • Fax: 570-825-2852
For Product Information Call: 1-800-433-2232
Visit Our Web Site: www.metro.com
10/07 Printed in U.S.A.
Information and specifications are subject to change
without notice. Please confirm at time of order.
Copyright © 2007 InterMetro Industries Corp.
L03-134
Loading...