Metro CASE-36RS User Manual
METRO CASE CARTS
The functional design of Metro Case Carts maximize
usable inside space for handling storage and
transport tasks efficiently. Carts can be used
wherever contents must be protected from an
“unclean” environment, including free-standing
ambulatory care centers, surgicenters, and hospital
based or out-patient surgeries.
• Quiet: Embossed sides and back, reinforced
top and floor, softer wheels and other noise
dampeners, provide a noticeably quieter ride.
• Efficient: Stainless steel cabinet and optional
shelves have smooth or protected edges to
eliminate ripping of packs that can cause costly
waste or reprocessing.
• Proficient: Carts are designed to maximize
interior cubic storage space and minimize the
exterior footprint delivering the most cubic storage
capacity per square foot to provide ample capacity
for transport and efficiency for staging.
• Accessible: Wire roller shelf extends out half way,
easily and quietly, even at lowest level where
accessibility is vital. Also available in solid or wire
without roller.
• Durable: Stainless steel casters are standard, not
an optional upgrade. They are non-corrosive and
cart-washable.
Item # ______________________________________________
Item # ______________________________________________
Job ________________________________________________
Job ________________________________________________
• Adjustable: Shelf brackets attach and detach
quickly from unique “keyhole” slots for easy shelf
adjustability at 2" (51mm) increments.
• Serviceable: Double-panel door construction offers
better strength and minimizes maintenance. Caster
channels on each side of the cart allows individual
replacement should a damaging situation occur.
In the same situation, other models would have to
replace the entire dolly.
• Easily Maneuverable: Full length handles on
both sides of the low profile carts and CASE36-H
allow for pushing or pulling from either end and
provide better cart control. One full length handle
is ergonomically located on the CASE24-H cart.
• Cleans Easily: Stainless steel construction makes
units cart washable. Shelves and brackets remove
for washing. Weep holes at the cart’s front corners
and underside of door panels facilitate drainage
and drying.
• High-Profile Model Available: The high-profile
models (CASE24-H, CASE36-H) save floor space,
as compared to conventional case carts. The
vertical design eliminates “stooping” and offers
quick, easy “stand-up” access to most contents.
Metro Case Carts
CASE24-L6S-P
InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
CASE36-L6S-P
CASE24-H6S-P
*Shelves sold separately.
CASE48-L6S-P
CASE36-H6S-P
33.10
Job ________________________________________________Job ________________________________________________
33.10
METRO CASE CARTS
Specifications
• Cart:
— Type 304 Stainless Steel, No. 3 finish type.
— Body embossments to dampen vibration noise
— Sloped flanges and weep holes to promote
water drainage
— Reinforced top and floor to stiffen surface and
reduce vibration noise
— Stainless steel door stay with nylon roller
— Welded door hinges to maintain door alignment
• Doors:
— Stainless steel, double panel
— Weep holes in bottom to promote drainage
— Removable
— Embossed interior to reduce vibration noise
— Replaceable paddle latch with security option
• Shelves (sold separately):
— Roller pullout stainless steel wire
— Pullout stainless steel or wire
— Adjustable on 2" (51mm) increments
— Rubber bumpers to minimize rattle noise
• Base Assembly:
— Replaceable non-marking wraparound bumper
with reinforced corners
— Replaceable caster channels
Available options
(Minimums may apply):
• Extended tops • Tote boxes • Custom sizes
• Casters:
— Stainless Steel: one swivel lock, two swivel with
brake, one swivel on 36” and 48" models; two
swivel, two swivel with brake on other models.
• TPR wheels and stainless steel horn
• All stainless steel hardware and top plate
• Double race of stainless steel swivel ball
bearings, grease sealed, dust cap with zerk
fitting
— Wheel: Thermoplastic rubber wheel with
rounded tread design provides a softer, quieter
ride than traditional flat faced wheels. The nonmarking material also resists flat spotting and
repels floor debris.
• Delrin® self lubricating bearing
• 11/4" (32mm) rounded face
• 6" (152mm) diameter
• Weight Capacity:
— Shelf: 125 lbs. (57kg)
— Total for Cart: 400 lbs. (181kg)
CASE-SECLATCH
Retrofit Passive
Lock Security Latch
Metro Case Carts
Dimensions
Case Carts
Width Height Approx.
Overall Cabinet Overall Cabinet Pkd. Wt. Model No.
(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg) with Passive Lock
33 838 275/8 702 399/16 1005 311/4 794 115 52 CASE24-L6S-P
45 1143 395/8 1007
57 1448 515/8 1311
33 838 275/8 702
45 1143 395/8 1007
All units are 2811/16" (729mm) deep overall. Cabinet depth is 257/8" (657mm).
Add -P suffix to end of catalog number to include security latch (i.e. CASE24-L6S-P).
Shelves
Shelf Size Approx. Approx. Approx.
For Use with Cart (DepthxWidth) Pkd. Wt. Model No. Pkd. Wt. Model No. Pkd. Wt. Model No.
Model No. Prefix (in.) (mm) (lbs.) (kg) Wire Shelf (lbs.) (kg) Wire Roller Shelf (lbs.) (kg) Solid Shelf
CASE24- 24x24 610x610 9 4 CASE-24WS 12 5 CASE-24RS 15 7 CASE-24SS
CASE36- 24x36 610x914 13 6 CASE-36WS 16 7 CASE-36RS 19 9 CASE-36SS
CASE48- 24x48 610x1219 19 9 CASE-48WS 21 10 CASE-48RS 25 11 CASE-48SS
Each shelf includes two attachment brackets.
All Metro Catalog Sheets are available on our website: www.metro.com
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
Phone: 570-825-2741
Product Information. U.S. and Canada: 1.800.992.1776
Outside U.S. and Canada: www.metro.com/contactus
399/16 1005 311/4 794
399/16 1005 311/4 794
565/16 1446
565/16 1446
417/8 1064 162 73 CASE24-H6S
417/8 1064 262 119 CASE36-H6S
186 84 CASE36-L6S
212 96 CASE48-L6S
Printed in U.S.A Rev. 07/14
Information and specifications are subject to
change without notice. Please confirm at time of order
Copyright © 2014 InterMetro Industries Corp.
L03-134e
-P
-P
-P
-P
Loading...