Metro C5T5-DSB User Manual

Page 1
Metro C5 T-Series Short Form Specifications (Digital Controls)
Metro C5 T-Series with Transport Armour™ heavy-duty heated holding cabinets shall be constructed of type 304 stainless steel with CFC free foamed-in-place polyurethane insulation. The cabinet shall have a vaulted door for maximum structural integrity, with 11 gauge stainless steel hinges, and an information panel for documentation management. The cabinet shall have the ability to keep hot food safe and out of the danger zone for 5 hours or longer while unplugged. It shall have steel reinforced polymer handles that double as bumpers, polymer Armour panels with built in vertical hand holds mounted to the sides of the cabinet. It shall also include a three-point-control handle on the back side of the cabinet (except ½ height cabinets). The cabinet shall have a maximum operating temperature of 200°F, be rated at 120V, 12A, 60Hz, 1400W, and have a coiled power cord with a NEMA 5-15P plug. The cabinet shall have top mount solid state digital controls with a battery operated mobile power system that gently circulates air inside the cabinet and keeps the controller illuminated and functional while unplugged. The cabinet shall be 73.88” (1876mm), 65.44” (1662mm), or 48.56” (1234mm) tall, 30” (762mm) wide, and 39.25” (997mm) deep. Slides will be adjustable bottom or lip load style aluminum extrusions on 1.675” (43mm), or fixed aluminum lip load on 1.675” (43mm) increments. The cabinet shall be energy Star, UL, CUL, and NSF listed.
(Copy cabinet specifics here)
Model Number Height Material
Doors (/Pass-Thru
Doors)
Slides Pan Capacity
Accessories to include:
Small Item Shelf (C5T-SHELF) Travel Latch / Hasp (C5T-TRVL)
Straight Plug (120V) (C5T-STRPLG) Adjustable Bottom Load Slide Pair (C5T-BSLIDEPR) Qty: Adjustable Lip Load Slide Pair (C5T-LSLIDEPR) Qty: Full Height Correctional Package (C5T-CORR-9)
Dual Cavity Correctional Package (C5T-CORR-9D)
5/6 Height Correctional Package (C5T-CORR-8)
1/2 Height Correctional Package (C5T-CORR-5)
220-240V, 6A, 50/60Hz, 1176-1400W (NEMA 6-15P)
Page 2
Full Height Model Number Height Controls Single / Dual Cavity Slides Pan Capacity
C5T9-DSB Full Height (73.88")
C5T9-DSL Full Height (73.88")
C5T9-DSF Full Height (73.88")
Digital Solid State
Digital Solid State
Digital Solid State
Single Cavity
Single Cavity
Single Cavity Fixed Lip Load
Adjustable Bottom Load on 1.675" Increments
Adjustable Lip Load on
1.675" Increments
(16) 18"x26", (32) 12x20x2.5"
(16) 18"x26", (32) 12x20x2.5"
(32) 12x20x2.5" / GN 1/1 (65mm)
Full Height Dual Cavity Model Number Height Controls Single / Dual Cavity Slides Pan Capacity
C5T9D-DSB
C5T9D-DSL
C5T9D-DSF
* Floor of cavity used for (2) pan levels
Full Height Dual Cavity (73.88")
Full Height Dual Cavity (73.88")
Full Height Dual Cavity (73.88")
Digital Solid State
Digital Solid State
Digital Solid State
Dual Cavity (independent cavity control)
Dual Cavity (independent cavity control)
Dual Cavity (independent cavity control)
Adjustable Bottom Load on 1.675" Increments
Adjustable Lip Load on
1.675" Increments
Fixed Lip Load
(14) 18"x26", (32*) 12x20x2.5"
(14) 18"x26", (28) 12x20x2.5"
(32) 12x20x2.5" / GN 1/1 (65mm)
5/6 Height
Model Number Height Controls Single / Dual Cavity Slides Pan Capacity
C5T8-DSB 5/6 Height (65.44")
C5T8-DSL 5/6 Height (65.44")
C5T8-DSF 5/6 Height (65.44")
Digital Solid State
Digital Solid State
Digital Solid State
Single Cavity
Single Cavity
Single Cavity Fixed Lip Load
Adjustable Bottom Load on 1.675" Increments
Adjustable Lip Load on
1.675" Increments
(14) 18"x26", (28) 12x20x2.5"
(14) 18"x26", (26) 12x20x2.5"
(28) 12x20x2.5" / GN 1/1 (65mm)
1/2 Height Model Number Height Controls Single / Dual Cavity Slides Pan Capacity
C5T5-DSB 1/2 Height (48.56")
C5T5-DSL 1/2 Height (48.56")
C5T5-DSF 1/2 Height (48.56")
Digital Solid State
Digital Solid State
Digital Solid State
Single Cavity
Single Cavity
Single Cavity Fixed Lip Load
Adjustable Bottom Load on 1.675" Increments
Adjustable Lip Load on
1.675" Increments
(9) 18"x26", (18) 12x20x2.5"
(9) 18"x26", (16) 12x20x2.5"
(18) 12x20x2.5" / GN 1/1 (65mm)
Loading...