Metro BSD2224XA User Manual

Item # ______________________________________________

Item # ______________________________________________

Job ________________________________________________

Job ________________________________________________

METROMAX iQ™ ACCESSORIES

MetroMax iQ Storage System consists of interchangeable corrosion proof MetroMax i™
and corrosion resistant MetroMax Q™ shelves and posts. While most accessories are
compatible on both shelf styles, some must be selected based on the style of shelf, and
are noted accordingly. Accessories listed in this specifi cation sheet are NSF listed unless
noted otherwise.

2" (51mm) Stackable Shelf Ledges

• Prevent items from falling off shelves.

• Snap on and off quickly. Easily stacked to contain larger items

• Corrosion proof: Polymer (High-Density Polypropylene) and Type 304 stainless steel.

• Ships assembled.

i Q

Ledge Ledge Nominal Length
Model No. Model No. Type (in.) (mm)

MXLS18-2S MQLS18-2S Side 18 457
— MQLS21-2S Side 21 530
MXLS24-2S MQLS24-2S Side 24 610

MXL24-2S MQL21-2S Back 24 610
MXL30-2S MQL30-2S Back 30 760
MXL36-2S MQL36-2S Back 36 914
MXL42-2S MQL42-2S Back 42 1066
MXL48-2S MQL48-2S Back 48 1219
MXL54-2S MQL54-2S Back 54 1370
MXL60-2S MQL60-2S Back 60 1524
MXL72-2S MQL72-2S Back 72 1829

MetroMax iQ

®

™

Accessories

8" (203mm) Shelf Dividers — standard duty

• Use to create organized compartments or to simply separate shelf contents.

• Easily repositioned on grid and solid shelves.

• Corrosion proof: Polymer (High-Density Polypropylene).

• Three-piece design — Ships assembled.

i Q

Ledge Ledge Nominal Length
Model No. Model No. (in.) (mm)

MXD18-8 MQD18-8 18 457
MXD24-8 MQD24-8 24 610

8" (203mm) Universal Shelf Dividers — light duty, for open grid shelves

• Maximum fl exibility: Can be repositioned along the entire shelf.

• Easiest divider to install.

• Three-piece design; clips connect to any open grid or wire shelf;
divider panel then drops into place. Does not attach to solid shelves.

• Corrosion proof: Polymer (High-Density Polypropylene).

i and Q Nominal Length

Model No. Fits Shelf Depth (in.) (mm)

MUD18-8 18", 21" (457, 530mm) 18 457
MUD24-8 24" (610mm) 24 610

Replacement clips: Model No. MTLA Bag of (2)

9.25

InterMetro Industries Corporation

North Washington Street
Wilkes-Barre, PA 18705
www.metro.com

METROMAX iQ

Shelf-to-Shelf Dividers

• Create full height compartments to fully organize the storage cube
between two shelves.

• Can be used as a side ledge or interior divider.

• Compatible with any MetroMax i™ or MetroMax Q open grid shelf or
Metro wire shelf.

• Consists of a divider assembly and (4) mounting clips.

Divider assembly: high density polypropylene 4" (102mm) panels

and stainless steel rods.

Mounting clips: high density polyethylene (HDPE)

i and Q Fits Shelf Depth Nominal Length

Model No. (in.) (mm) (in.) (mm)

MD18-16 18, 21 457, 530 16 406
MD18-20 18, 21 457, 530 20 508
MD18-24 18, 21 457, 530 24 610

MD24-16 24 610 16 406
MD24-20 24 610 20 508
MD24-24 24 610 24 610

Replacement mounting clips may be ordered.
RPM3-S2SBAG Bag of (4) clips

™

ACCESSORIES

Enclosure Panels

• An effi cient way of enclosing the sides and back of all shelves in a

unit to contain stored contents.

• Slot opening: 3" W x 37/8" H.

• Designed to work on MetroMax i™ and MetroMax Q units. Mounting

clips included.

• CRS wire with durable taupe epoxy fi nish. Mounting clips — Acetyl

• Replacement mounting clips for enclosures.

MetroMax i: RPMX3-RODTAB Bag of (8) clips
MetroMax Q: RPMQ3-RODTAB Bag of (8) clips+(1) enclosure adapter

For Use With For Use With Approx.

i and Q Width/Height Post Height Shelf Width Pkd. Wt.
Model No. (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)

MEP35E 123/8x511/4 315x1300 54 1370 18 457 61/4 2.8
MEP36E 123/8x591/4 315x1505 63 1600 18 457 7 3.2
MEP37E 12

MEP55E 18
MEP56E 18
MEP57E 183/8x711/4 467x1810 74 1880 24 610 113/4 5.3

Panels Required to Enclose Both Ends of Shelving Unit or Cart

18" 21" 24"
Post Height (457mm) (530mm) (610mm)

54" (1370mm) (2) MEP35E (2) MEP55E (2) MEP55E
63" (1600mm) (2) MEP36E (2) MEP56E (2) MEP56E
74" (1800mm) (2) MEP37E (2) MEP57E (2) MEP57E

Shelf Length
30" 36" 42" 48" 54” 60" 72"
Post Height (760mm) (914mm) (1066mm) (1219mm) (1370mm) (1524mm) (1825mm)

54" (1370mm) (2) MEP35E (1) MEP35E (2) MEP35E (1) MEP35E (1) MEP35E
(1) MEP55E (2) MEP55E (1) MEP55E (2) MEP55E (3) MEP55E (3) MEP55E
63" (1600mm) (2) MEP36E (1) MEP36E (2) MEP36E (1) MEP36E (1) MEP36E
(1) MEP56E (2) MEP56E (1) MEP56E (2) MEP56E (3) MEP56E (3) MEP56E
74" (1880mm) (2) MEP37E (1) MEP37E (2) MEP37E (1) MEP37E (1) MEP37E
(1) MEP57E (2) MEP57E (1) MEP57E (2) MEP57E (3) MEP57E (3) MEP57E

3

/8x711/4 315x1810 74 1880 18 457 83/4 4.0

3

/8x511/4 467x1300 54 1370 24 610 9 4.1

3

/8x591/4 467x1505 63 1600 24 610 101/4 4.7

Shelf Width

MetroMax i
Mounting Clip

Enclosure
Panel

MetroMax Q
Mounting Clip

METROMAX iQ

™

ACCESSORIES

Super Slide

• Easily attaches to the shelf frame (under the mats) and is sized to
hold 3", 5", 6", and 8" (76, 127, 152, 203mm) tall tote boxes.

• MetroMax i™ and Q models available.

• Corrosion-resistant taupe epoxy fi nish.

Approx.

i Q Width Length Width Pkd. Wt.
Model No. Model No. (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)

MXSS2E MQSS2E 203/8 520 215/8 550 101/4 260 51/4 2

Undershelf Slide

• Easily attaches to the MetroMax i™ shelf frame to allow you create a
more versatile storage system.

• Tote box can serve as a drawer on mobile units or utility carts.

• Aluminum fi nish.

Approx.

i Fits Shelf Width Length Pkd. Wt.
Model No. (in.) (mm) (in.) (mm) (lbs.) (kg)

BSD2218XA 18 457 223/4 578 31/4 1.5
BSD2224XA 24 610 173/4 451 33/4 1.7

NOTE: Not adaptable to 24" (610mm) long MetroMax i shelf.

Metro® Tote Boxes for Super Slide System

Approx.
Model No. Model No. Width/Length Height Pkd. Wt.
White Totes Natural Totes (in.) (mm) (in.) (mm) (lbs.) (kg)

MTB93030W TB93030NAT 171/2x223/8 457x570 3 75 0.44 0.012
MTB93050W TB93050NAT 171/2x223/8 457x570 5 127 0.79 0.022
MTB93060W TB93060NAT 171/2x223/8 457x570 6 150 0.97 0.027
MTB93080W TB93080NAT 171/2x223/8 457x570 8 203 1.32 0.037

Adjustable Slides

• Slides can be adjusted left to right to accommodate a variety of
pan, tray, and container sizes.

• MetroMax i™ and Q models available.

• Corrosion-resistant taupe epoxy fi nish.

Approx.
i Q Fits Shelf Width Pkd. Wt.
Model No. Model No. (in.) (mm) Length (lbs.) (kg)

MX18SE MQ18SE 18 457 Adjustable 103/4 5
MX24SE MQ24SE 24 610 Adjustable 123/4 6

METROMAX iQ

Storage Level Frames

• Open four sided frames accommodate drop-in accessories
including wire baskets and stainless drying racks.

• Includes corrosion proof MetroMax i™ frame and a bag of wedges

Nominal Exterior Frame Interior Approx.
Width Length i and Q Width/Length Pkd. Wt.
(in.) (mm) (in.) (mm) Model No. (in.) (mm) (lbs.) (kg)

18 457 24 610 M4F1824 18x20 457x510 43/4 2.2
18 457 30 760 M4F1830 18x26 457x660 6 2.7
18 457 36 914 M4F1836 18x32 457x810 7 3.2
18 457 42 1060 M4F1842 18x38 457x965 81/4 3.8
18 457 48 1220 M4F1848 18x44 457x1120 91/2 4.3
18 457 54 1372 M4F1854 18x50 457x1219 101/2 4.8
18 457 60 1524 M4F1860 18x56 457x1370 113/4 5.3
18 457 72 1829 M4F1872 18x68 457x1725 14 6.4

24 610 24 610 M4F2424 24x20 610x510 7
24 610 30 760 M4F2430 24x26 610x660 91/2 4.3
24 610 36 914 M4F2436 24x32 610x810 111/4 5.1
24 610 42 1060 M4F2442 24x38 610x965 131/4 6.0
24 610 48 1220 M4F2448 24x44 610x1120 15 6.8
24 610 54 1372 M4F2454 24x50 610x1219 17 7.7
24 610 60 1524 M4F2460 24x56 610x1370 183/4 8.5
24 610 72 1829 M4F2472 24x68 610x1725 221/2 10.2

1

/2 3.4

™

ACCESSORIES

Wire Baskets

• Conveniently hold small items

• 9" (229mm) deep

• Built in storage handles allow
easy removal

• Corrosion resistant taupe
epoxy fi nish.

Approx.
Nominal Width Nominal Length Pkd. Wt.
Model No. (in.) (mm) (in.) (mm) (lbs.) (kg)

MB1816XE 18 457 16 406 9 4.1
MB1822XE 18 457 22 560 10 4.5

MB2416XE 24 610 16 406 10 4.5
MB2422XE 24 610 22 560 12 5.5

NOTE: MB1822XE and MB2422XE are not adaptable to 24" (610mm) long MetroMax i storage level frames

Additional Basket options: Not NSF listed

Confi guration Chart

Qty. to Fill Out Shelf Frame
Frame B1816XE B1822XE B241616XE B2422XE

M4F1836 2
M4F1842 1 1
M4F1848 2
M4F1860 2 1
M4F1872 3

M4F2436 2
M4F2442 1 1
M4F2448 2
M4F2460 2 1
M4F2472 3

I.V. Storage Basket

Epoxy coated. Can be mounted level or
at 10 degree slant.

Model No. IVB1

See Spec Sheet 30.20 for detail.

Glassware Handling Basket

Vinyl coated. Fits 18 x 36" (457 x 914mm)
MetroMax i™ frame.

Model No. GWBSKT36

See Spec Sheet 52.01 for detail.

METROMAX iQ

™

ACCESSORIES

Stainless Steel Drop-in Racks

• Open wire design to safely dry pots, pans, and containers

• To create a storage level with stainless drop-in order the following
Qty. 1 Drop-in rack
Qty. 1 4-sided MetroMax i™ frame
Qty. 1 MetroMax i™ center beam

• Can be retrofi tted to existing MetroMax i™ shelves. Simply remove
the mats and drop in the stainless drying rack.

• Center beams: RPMX36-CBEAM, RPMX48-CBEAM,
RPMX60-CBEAM

Approx.
i and Q Width Length Height Wire Spacing Pkd. Wt.
Model No. (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)

DR36S 24 610 337/8 860 51/4 133 3/4 19 9 4.1
DR48S 24 610 457/8 1165 51/4 133 3/4 19 12 5.4
DR60S 24 610 577/8 1470 51/4 133 3/4 19 15 6.8

Cutting Board and Tray Drying Rack System

• Rack is mounted to standard MetroMax i™ or MetroMax Q shelf.

• Promotes safe air drying of cutting boards and trays.

• 11/8" (28mm) and 3" (76mm) slide spacing available.

Upright Upright Approx.
I and Q Fits Shelf Spacing Height Tray Pkd. Wt.
Model No. (in.) (mm) (in.) (mm) (in.) (mm) Capacity (lbs.) (kg)

MTR2436XE 24x36 457x914 11/8 28 6 150 24 13.5 6.1
MTR2448XE 24x48 457x1219 11/8 28 6 150 34 18.0 8.2
MTR2460XE 24x60 457x1524 11/8 28 6 150 42 22.5 10.2

MTR2436XEA 24x36 457x914 3 76 6 150 10 9.8 4.4
MTR2448XEA 24x48 457x1219 3 76 6 150 14 13 5.9
MTR2460XEA 24x60 457x1524 3 76 6 150 17 16.3 7.4

Can Rack System

• Front loading, front dispensing can rack holds eight #10 cans or
twelve #5 cans.

• Tough, corrosion resistant taupe epoxy fi nish.

• Mounts on any MetroMax i™ or MetroMax Q shelf.

Approx.
i and Q Width/Length/Height Pkd. Wt.
Model No. (in.) (mm) (lbs.) (kg)

CR24E 77/8x255/16x15 200x643x381 10 4.5

3-Sided frames

• 1" (25mm) x 11/2" (38mm) structural steel tubing. Includes tri-lobal
adapters to attach to posts. (Replacement adapters: Model No.
MTLA bag of 4)

• Corrosion resistant taupe epoxy fi nish.

• Use when confi guring work tables or as a 3-sided ledge to contain
bulky items.

Approx.
i and Q Nominal Width Nominal Length Pkd. Wt.
Model No. (in.) (mm) (in.) (mm) (lbs.) (kg)

M3TF1824E 18 457 24 406 11 5
M3TF1830E 18 457 30 760 12 5.4
M3TF1836E 18 457 36 914 13 5.7
M3TF1848E 18 457 48 1220 15 6.6
M3TF1860E 18 457 60 1524 18 8.2

M3TF2424E 24 610 24 406 12 5.4
M3TF2430E 24 610 30 760 13 5.7
M3TF2436E 24 610 36 914 14 6.4
M3TF2448E 24 610 48 1220 18 8.2
M3TF2460E 24 610 60 1524 20 9.1

METROMAX iQ

Handles

Use handles on mobile units to improve maneuvering and ergonomics.
Handles will fi t both MetroMax i™ and MetroMax Q units. Stainless steel
material will offer long lasting performance.

Extended Handle

• Type 304 stainless steel handle and reinforced nylon tri-lobal adapters.

Extension Depth Approx.
i and Q Fits Shelf Depth (Post to Edge of Handle) Pkd. Wt.
Model No. (in.) (mm) (in.) (mm) (lbs.) (kg)

MEH18S 18 457 4.5 113 2.5 1.1
MEH21S 21 530 4.5 113 2.6 1.2
MEH24S 24 610 4.5 113 2.7 1.3

Easy-Grip Handle

• Ergonomic design.

• Type 304 stainless steel handle and reinforced nylon tri-lobal adapters.

Extension Depth Approx.
i and Q Fits Shelf Depth (Post to Edge of Handle) Pkd. Wt.
Model No. (in.) (mm) (in.) (mm) (lbs.) (kg)

MERGH18S 18 457 6 151 2.5 1.1
MERGH24S 24 610 6 151 3.0 1.4

™

ACCESSORIES

Swing-Up Handle

• Ideal for maneuvering heavier loads.

• Type 304 stainless steel handle and reinforced nylon tri-lobal adapters.

Extension Depth Approx.
i and Q Fits Shelf Depth (Post to Edge of Handle) Pkd. Wt.
Model No. (in.) (mm) (in.) (mm) (lbs.) (kg)

MSUH24S 24 610 17.75 447 4.5 2.0

Replacement T ri-Lobal Adapters

Model No. MTLA 4 pair per bag

MTLA

Mounted to Polymer Post

METROMAX iQ

™

ACCESSORIES

Stem Casters

Stem casters are used with stem caster posts to create transport carts or to enable fully
loaded stationary storage units to be easily repositioned when cleaning fl oors or walls.

Consider stem casters with polymer horns and stainless axles (5PCX, 5PCBX, 5PCRX) for
greater corrosion protection.

• MetroMax iQ Stem Casters: Use with polymer or steel stem caster posts to create a
storage and transport unit to meet your needs.

Approx.
Wheel Diameter Face Load Rating Pkd. Wt.
Model No. Wheel Tread Type (in.) (mm) (in.) (mm) (lbs.) (kg) (lbs.) (kg)

5MX Resilient Stem/Swivel 5 127 11⁄4 32 200 90 23⁄4 1.2
5MBX Resilient Stem/Brake 5 127 11⁄4 32 200 90 3 1.4
5MRX Resilient Stem/Rigid 5 127 11⁄4 32 200 90 33⁄4 1.7
5MPX Polyurethane Stem/Swivel 5 127 11⁄4 32 300 135 21⁄4 1.0
5MPBX Polyurethane Stem/Brake 5 127 11⁄4 32 300 135 21⁄2 1.1
5MPRX Polyurethane Stem/Rigid 5 127 11⁄4 32 300 135 21⁄4 1.0
5MDXA Resilient Stem/Swivel Donut 5 127 11⁄4 32 250 110 21⁄2 1.1
5MDBXA Resilient Stem/Brake Donut 5 127 11⁄4 32 250 110 21⁄2 1.1
5MDRXA Resilient Stem/Rigid Donut 5 127 11⁄4 32 250 110 21⁄2 1.1

Donut bumpers included.

5MPX

• Polymer Casters: Corrosion-resistant design.

Approx. Temperature
Wheel Diameter Face Load Rating Pkd. Wt. Range
Model No. Wheel Tread Type (in.) (mm) (in.) (mm) (lbs.) (kg) (lbs.) (kg) (continuous)

5PCX Polyurethane Swivel 5 127 11⁄4 32 300 135 2 .9 -20°F to 120°F
5PCBX Polyurethane Brake 5 127 11⁄4 32 300 135 2 .9 -20°F to 120°F
5PCRX Polyurethane Rigid 5 127 11⁄4 32 300 135 2 .9 -20°F to 120°F

Specifi c Models with Antimicrobial Protection

Approx. Temperature
Wheel Diameter Face Load Rating Pkd. Wt. Range

Cat. No. Wheel Tread Type (in.) (mm) (in.) (mm) (lbs.) (kg) (lbs.) (kg) (continuous)

5PCXM Polyurethane Swivel 5 127 11⁄4 32 300 135 2 .9 -20°F to 120°F
5PCBXM Polyurethane Brake 5 127 11⁄4 32 300 135 2 .9 -20°F to 120°F

NOTE 1: Optional thread guards (blue) may be ordered by adding “-TG” to the desired model number (e.g. 5PC-TG, 5PCB-TG, 5PCR-TG).
NOTE 2: Stem casters are shipped with donut bumpers at no extra charge.
NOTE 3: Rigid casters are held in place by a connecting channel. When ordering, shelf depth must be provided.

Truck Dolly Bases

For heavy duty mobile applications. Truck dollies are available in aluminum or
stainless construction with corner bumpers or wrap-around bumpers.
For more information, refer to Spec Sheet 11.37

5PCX

Replacement Bumper
Model No. M9992DBX

Mounting Bolt Kit

When ordering a dolly frame for use with MetroMax i™ or MetroMax Q, include
mounting bolt kit DMK-2X on order.
Order one mounting bolt kit per dolly.

Job ________________________________________________Job ________________________________________________

9.25

METROMAX iQ

™

ACCESSORIES

Label Holders

• Plastic holders snap onto shelf edge to accommodate 1" (25mm)
adhesive label. Label not included.

• i and Q versions available.

• Optional label holder covers exist for MetroMax Q models. Cover
snaps onto the label holder to hold a non-adhesive label in place or
to protect any label from dirt and moisture.

MetroMax i

Approx.
Actual Length Fits Shelf Pkd. Wt.
Model No. (in.) (mm) (in.) (mm) (lbs.) (kg)

9989PX 1x41/2 25.4x114 All .03 .01
9989X1 1x119/32 25.4x285 24 610 .14 .06
9989X2 1x179/32 25.4x438 30 760 .24 .10
9989X3 1x239/32 25.4x590 36 914 .30 .13
9989X4 1x299/32 25.4x742 42 1060 .35 .15
9989X5 1x359/32 25.4x895 48 1219 .40 .18
9989X6 1x419/32 25.4x1047 54 1370 .45 .20

MetroMax Q

Label Holder Cover Length
Model No. Model No. (in.) (mm)

Q04LH Q04LHC 4 102
Q24LH Q24LHC 24 610
Q30LH Q30LHC 30 760
Q36LH Q36LHC 36 914
Q42LH Q42LHC 42 1066
Q48LH Q48LHC 48 1219
Q54LH Q54LHC 54 1370
Q60LH Q60LHC 60 1524
Q72LH 72 1825

™

Color Shelf Markers

• Attach easily to shelf for content identifi cation.

• Available in seven standard colors.

Accessories

™

• i and Q versions available.

i Q Length
Model No. Model No. Shelf Marker Color (in.) (mm)

CSM6-BX CSM6-BQ Blue 6 152
CSM6-GX CSM6-GQ Green 6 152
CSM6-RX CSM6-RQ Red 6 152
CSM6-TX CSM6-TQ Tan 6 152
CSM6-WX CSM6-WQ White 6 152
CSM6-YX CSM6-YQ Yellow 6 152
CSM6-GRX CSM6-GRQ Gray 6 152

All Metro Catalog Sheets are available on our Web Site: www.metro.com

MetroMax iQ

For Product Information:
U.S. and Canada: 1.800.433.2232

InterMetro Industries Corporation

North Washington Street, Wilkes-Barre, PA 18705
Phone: [phone]
Fax: [phone]

Latin America: 1.561.333.3824
Europe: +31.76.587.7550

Information and specifi cations are subject to change

without notice. Please confi rm at time of order.

Copyright © 2009 InterMetro Industries Corp.

Pacifi c: +65.6567.8003

Asia

/

Middle East

Africa: +971.4.811.8286

/

Printed in U.S.A. Rev. 4

L02-179

10

/