Metro A121 User Manual
®
®
METRO MOBILE
ROLL-IN REFRIGERATOR
RACKS
Model RF Series
• Material: Special design, natural finish, high-
strength, extruded aluminum (6063-T6 alloy).
• Rugged: Aircraft-riveted construction
throughout . . . means additional strength.
• Pass-Thru Design: Can be loaded on one side
and unloaded from the other for maximum
efficiency and convenience.
Item # ______________________________________________
Job ________________________________________________
METRO MOBILE
Roll-In Refrigerator Racks Model RF Series
• Sized To Fit Refrigerator: Rack rolls directly into
refrigerator for quick and easy storage. You save
valuable handling time and expensive labor costs.
• Lightweight and Freewheeling
• Sanitary: Easy to clean.
• Rapid Cooling Saves Energy
RF13N
NSF
®
13.80
InterMetro Industries Corporation
®
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
Copyright © 2000 InterMetro Industries Corp.
Job ________________________________________________
®
METRO MOBILE
®
13.80
ROLL-IN REFRIGERATOR RACKS
Specifications
Materials: Special design, natural finish, high-strength, extruded
aluminum (6063-T6 alloy).
Construction: Pass-thru design, aircraft-riveted construction
throughout.
Corner Posts: 11⁄2" x 11⁄2" x 1⁄8" angle-shape. (Except RF20N, RF29N:
1"x 11⁄2" x 1⁄8")
Top & Bottom: 11⁄2" x 11⁄2" x 1⁄8" angle-shape riveted to four corner
posts. (Bottom closed on RF78N.)
Casters: Two A5L on back — 5" ball bearing swivel, self-lubricating
axle, rubber-wheeled, zinc-plated, bolted to full-length 14-gauge
channel to bottom frame. Two A5LB on front — same as above with
wheel brake. (Except two B5DN and two B5DNB on RF78N.)
Slides: RF3N and RF23N, .060" x 11⁄4" x 11⁄2" bulb-tipped angle. RF13N
and RF20N, .060" x 1⁄2" x 11⁄2" extruded aluminum channel. RF29N, 18gauge x 1⁄2" x 11⁄2 " stainless steel channel. RF78N,12 sets extruded varislides, adjustable on 11⁄2" centers, 3" minimum slide spacing.
B
C
A
Dimensions
(A) (B) (C) (B) (C) Slide Shipping
Height Width Depth Width Depth Spacing Pan Capacity Weight
(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) No. Size (in.) (lbs.) (kg) Cat. No.
64 1600 211⁄4 540 26 660 231⁄4 590 28 710 11⁄2 38 36 18x26 44 20 RF13N
64 1600 213⁄8 543 26 660 233⁄8 595 28 710 3 76 18 18x26 55 25 RF3N
64 1600 213⁄8 543 26 660 233⁄8 595 28 710 5 127 11 18x26 43 19 RF23N
641⁄2 1610 243⁄8 630 26 660 263⁄8 670 28 710 See Note 1 See Note 1 92 41 RF78N
NOTE: Swivel casters, two with brakes, are standard on the units listed above.
NOTE 1: Pan capacity with 12 sets of slides on 41⁄2" centers.
Accessories
Description Model
Gray Continuous Bumper A33RD
Gray Corner Bumpers A37
Floor Lock with B5DN/B5DNB Casters Only A71
Extra Vari-Slides for RF78N A121
METRO MOBILE
Roll-In Refrigerator Racks Model RF Series
Manufactured by:
Without Bumper With A33 Bumper
2 per slide 1 per slide
No. Size (in.) No. Size (in.)
24 107⁄8x193⁄4 12 15x20
24 111⁄8x20 12 18x26
24 12x18 12 20x20
24 12x20 12 20x22
24 13x18 12 20x24
24 14x18
InterMetro Industries Corporation
®
North Washington Street, Wilkes-Barre, PA 18705
Phone: 570-825-2741 • Fax: 570-825-2852
For Product Information Call: 1-800-433-2232
Visit Our Web Site: www.metro.com
Information and specifications are subject to change
without notice. Please confirm at time of order.
L02-085
Rev. 4/00
Printed in U.S.A.
Loading...