Metro 5MDXA User Manual
LAB SOLUTIONS
Item # ___________________________________
Metro® LAB SOLUTIONS
Metro’s line of laboratory solutions address a wide range
of laboratory requirements while providing a superior level
of corrosion resistance. Built from advanced polymers
that include *Microban® antimicrobial product protection,
Metro’s innovative MetroMax i®, myCart™, and Deep
Ledge designs provide the ideal product platform.
Available product solutions are modular by design and
offer the customer ultimate exibility by permitting the end
user to select the most appropriate caster based on their
budget and/or application requirements. Metro’s Polymer
Laboratory Solutions include:
• Lab Worktables and Accessories
• Antimicrobial Casters
• Glassware Handling Solutions
• High Performance Liquid Chromatography Solutions
• General Lab Cart
• Chemical Transport Cart
• Mobile Desk
• myCart™ and Deep Ledge Lab Carts
MetroMax i®, shelves have built-in Microban® antimicrobial
product protection. Both myCart™ and Deep Ledge series
offer select models with built-in Microban®. Microban
protects the posts and shelves from bacteria, mold,
mildew and fungi that cause odors, stains and product
degradation.
• Corrosion Resistant: MetroMax i® shelves and posts
are designed to withstand rust and corrosion over the life
of the product, so they are perfectly suited for damp and
humid conditions. MetroMax i® shelves and posts come
with a lifetime warranty against rust and corrosion.
• Cleans Easily: Solid MetroMax i® and Deep Ledge
shelves contain spills and wipe down easily. Shelf frame
and posts are smooth and rounded with no sharp edges
so they wipe down easily.
• Strong and Durable: Reinforced polymers give
MetroMax i® incredible strength — up to 800 lbs.
(364kg) per shelf. MyCart™ and Deep Ledge shelf load
rating depends on the size of the shelf.
Job _____________________________________
MetroMax i®
Lab Worktable
(Shown with
accessories,
casters and
Starsys Cart)
MetroMax i
4 Basket
Glassware Cart
(Shown with
casters and
accessories)
®
LABORATORY SOLUTIONS — JUST Add cASTeRS
*MICROBAN is a registered trademark of Microban Products Company.
InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
52.01
9.01
LAB SOLUTIONS
LAB SOLUTIONS
Specications
MetroMax i®:
Longitudinal Beams and Posts: Pultrusions — continuous
glass bers and thermoset resin composite with built-in
Microban antimicrobial product protection.
Mats, Open and Solid: Mineral reinforced polypropylene.
Mats contain Microban
®
antimicrobial product protection.
Ledges, Dividers, and Wedge: Glass reinforced
polypropylene.
Post Cap and Center Beam Cap: High-density polyethylene.
MetroMax i
®
is applicable in cooler conditions down to -20°F
MetroMax i® Lab Worktables
• Advanced polymer construction provides excellent corrosion-resistance performance
for the most corrosive lab environments.
• Table features smooth surfaces that are easy-to-clean. Mobile units can be easily
moved to clean behind table area.
• Available top materials include Type 304 stainless and TRESPA phenolic
resin (black or gray). Refer to chart below for more information.
• Choose from a wide range of available accessories and caster options
(page 3) to customize table for a specic application.
(-29°C).
Countertop (Lab Worktables):
Stainless Steel Top: 16 gauge (.060) thk, Type 304 Stainless
Steel, #3 Polish with vinyl protection. Bull nose front edge and
4” (102mm) high brake-formed backsplash.
Phenolic Top: TRESPA Top Lab Plus (black or gray)
phenolic resin.
Phenolic Backsplash: TRESPA Athlon (black or gray)
phenolic resin.
Countertop Application Matrix
Epoxy Phenolic Stainless Epoxy Phenolic Stainless
Use Area Resin Resin Steel Characteristics Resin Resin Steel
Heat Resistance Excellent Fair* Excellent
Low chemical use Abrasion Resistance Good Excellent Good
Moderate chemical use X X Impact Resistance Good Excellent Good
High chemical use X X Strength Good Excellent Good
Stain Resistance Good Good Good
*Discolors with high heat
Note: Phenolic resin and stainless are offered as top options for this table system. Epoxy resin information is shown for comparison
only.
Definitions:
Phenolic resin: Compression molded of organic ber-reinforced phenolic core with an
integrally cured thermoset resin surface. Stronger than Epoxy resin over a span, and
not as brittle.
Stainless Steel: Worksurfaces are fabricated from Type 304 stainless steel which
provides excellent protection in corrosive environments.
Epoxy resin: Epoxy resins, silica, organic llers, and inert hardeners are cast in forms
and cured to a uniform mixture throughout.
Select Table Style from Chart Below and Following Page:
Worktables with Stainless Backsplash, Top and Solid MetroMax i® Shelf
Work Surface Overall Approx.
Cat. No. Cat. No. Width Length Height Height Pkd. Wt.
Stationary Mobile* (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)
LT30XS3 LTM30XS3 30 762 293/4 749 351/2 902 391/2 1003 65 29
LT36XS3 LTM36XS3 30 762 353/4 908 351/2 902 391/2 1003 70 32
LT48XS3 LTM48XS3 30 762 473/4 1213 351/2 902 391/2 1003 90 41
LT60XS3 LTM60XS3 30 762 593/4 1517 351/2 902 391/2 1003 100 45
*Casters ordered separately. Refer to Caster Selection Guide (page 3) for caster options.
Note: Lab Worktables are load rated at 50 lbs. (23kg) per square foot up to a maximum of 600 lbs. (273kg), assuming load
evenly distributed.
Worktables with Stainless Backsplash, Top and 3-Sided Frame
Work Surface Overall Approx.
Cat. No. Cat. No. Width Length Height Height Pkd. Wt.
Stationary Mobile* (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)
LT30XUS3 LTM30XUS3 30 762 293/4 749 351/2 902 391/2 1003 70 32
LT36XUS3 LTM36XUS3 30 762 353/4 908 351/2 902 391/2 1003 75 34
LT48XUS3 LTM48XUS3 30 762 473/4 1213 351/2 902 391/2 1003 95 43
LT60XUS3 LTM60XUS3 30 762 593/4 1517 351/2 902 391/2 1003 110 50
*Casters ordered separately. Refer to Caster Selection Guide (page 3) for caster options.
Note: Lab Worktables are load rated at 50 lbs. (23kg) per square foot up to a maximum of 600 lbs. (273kg), assuming load
2
evenly distributed.
LTM60XUPG3
(Shown with accessories,
casters and Starsys Cart)
LTM30XS3
(Shown with
casters)
LTM30XUS3
(Shown with
accessory
wire shelf
and casters)
LAB SOLUTIONS
MetroMax i™ Lab Worktables (cont’d)
Select Table Style from Chart Below:
Worktables with Black Phenolic Top and Solid MetroMax i™ Shelf
Work Surface Overall Approx.
Cat. No. Cat. No. Width Length Height Height Pkd. Wt.
Stationary Mobile* (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)
LT30XPB3 LTM30XPB3 30 762 293/4 749 361/2 927 401/2 1016 85 38
LT36XPB3 LTM36XPB3 30 762 353/4 908 361/2 927 401/2 1016 91 41
LT48XPB3 LTM48XPB3 30 762 473/4 1213 361/2 927 401/2 1016 118 53
LT60XPB3 LTM60XPB3 30 762 593/4 1517 361/2 927 401/2 1016 138 62
*Casters ordered separately. Refer to Caster Selection Guide (page 3) for caster options.
Note: Lab Worktables are load rated at 50 lbs. (23kg) per square foot up to a maximum of 600 lbs. (273kg), assuming load
evenly distributed.
Worktables with Black Phenolic Top and 3-Sided Frame
Work Surface Overall Approx.
Cat. No. Cat. No. Width Length Height Height Pkd. Wt.
Stationary Mobile* (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)
LT30XUPB3 LTM30XUPB3 30 762 293/4 749 361/2 927 401/2 1016 90 41
LT36XUPB3 LTM36XUPB3 30 762 353/4 908 361/2 927 401/2 1016 97 44
LT48XUPB3 LTM48XUPB3 30 762 473/4 1213 361/2 927 401/2 1016 125 56
LT60XUPB3 LTM60XUPB3 30 762 593/4 1517 361/2 927 401/2 1016 145 66
*Casters ordered separately. Refer to Caster Selection Guide (page 3) for caster options.
Note: Lab Worktables are load rated at 50 lbs. (23kg) per square foot up to a maximum of 600 lbs. (273kg), assuming load
evenly distributed. Worktables with Black Phenolic Top and 3-Sided Frame
Worktables with Gray Phenolic Top and Solid MetroMaxi™ Shelf
Work Surface Overall Approx.
Cat. No. Cat. No. Width Length Height Height Pkd. Wt.
Stationary Mobile* (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)
LT30XPG3 LTM30XPG3 30 762 293/4 749 361/2 927 401/2 1016 85 38
LT36XPG3 LTM36XPG3 30 762 353/4 908 361/2 927 401/2 1016 91 41
LT48XPG3 LTM48XPG3 30 762 473/4 1213 361/2 927 401/2 1016 118 53
LT60XPG3 LTM60XPG3 30 762 593/4 1517 361/2 927 401/2 1016 138 62
*Casters ordered separately. Refer to Caster Selection Guide (page 3) for caster options.
Note: Lab Worktables are load rated at 50 lbs. (23kg) per square foot up to a maximum of 600 lbs. (273kg), assuming load
evenly distributed. Worktables with Black Phenolic Top and 3-Sided Frame
LTM48XPB3
(Shown with backsplash
accessory and casters)
LTM60XUPB3
(Shown with
accessories and casters)
Worktables with Gray Phenolic Top and 3-Sided Frame
Work Surface Overall Approx.
Cat. No. Cat. No. Width Length Height Height Pkd. Wt.
Stationary Mobile* (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)
LTM48XPG3
(Shown with backsplash
accessories and casters)
LT30XUPG3 LTM30XUPG3 30 762 293/4 749 361/2 927 401/2 1016 90 41
LT36XUPG3 LTM36XUPG3 30 762 353/4 908 361/2 927 401/2 1016 97 44
LT48XUPG3 LTM48XUPG3 30 762 473/4 1213 361/2 927 401/2 1016 125 56
LT60XUPG3 LTM60XUPG3 30 762 593/4 1517 361/2 927 401/2 1016 145 66
*Casters ordered separately. Refer to Caster Selection Guide (page 3) for caster options.
Note: Lab Worktables are load rated at 50 lbs. (23kg) per square foot up to a maximum of 600 lbs. (273kg), assuming load
evenly distributed. Worktables with Black Phenolic Top and 3-Sided Frame
For Mobile Lab Tables, Select Appropriate Casters from Chart Below.
(Four brake casters are recommended for maximum table stability)
LTM60XUPG3
(Shown with
accessories and casters)
Caster Selection Guide
Load Rating Corrosion Cart Antimicrobial
*Caster Series Wheel Material Rollability Floor Protection Noise (lbs.) (kg) Resistance Washable Additive in Wheel
5MDXA/5MDBXA (brake) High Modulus Rubber Good Good Low 250 114 Low No No
5MPX/5MPBX (brake) Polyurethane Good Good Moderate 300 137 Low No No
5PCX/5PCBX (brake) Polyurethane Good Good Moderate 300 137 High No No
5PCXM/5PCBXM (brake) Polyurethane Good Good Moderate 300 137 High No Yes
5MPXGSA/5MPXGSA (brake) Polyurethane Good Good Moderate 300 137 High Yes No
*Casters listed are for use with MetroMax i™ product solutions.
NOTE: The total weight of the equipment and its load should not exceed three times the load rating per caster.
Additional stem casters, in various sizes and wheel materials, are available. Contact your Metro representative for more information.
See page 4 for caster photos.
3
Loading...