Page 1
M ET R O M AX iQ™ ST O RA G E S YS TE M
JULY 2009
un
iQ
ue
WWW.METRO.COM
Page 2
MetroMax iQ™ Storage System :-)
Combines the advantages of MetroMax i™
™
and MetroMax Q
perfect for you—we call it iQ.
to create a system that’s
Page 3
C O N T E N T S
MetroMax iQ™
Storage System :-)
iQ System Overview .......................................................2-3
™
How MetroMax i
Build-a-shelf with the iQ Shelving System .......................6-7
Casters, Pull & Push Handles ...........................................8-9
Mobile Shelving Units & Utility Carts .......................... 10-11
Starter and Add-on Units ............................................12-13
System Accessories ....................................................14-20
Security Storage .............................................................. 21
High-Density Movable Aisle Shelving ..........................22-24
Shelving Comparison ...................................................... 25
& MetroMax Q™ Integrate ...................4-5
Page 4
un
equation.
i + Q = iQ ...now that’s smart.
iQ
ue
Uniquely Justifiable :-)
“Budgets are tight... so we need
to make every dollar last.”
MetroMax i™
Uniquely Lifelong...
Uniquely Cleanable :-)
“Removable mats are a must in
any industry, so cleanable.”
MetroMax Q™
Unique Value...
Uniquely Interchangeable :-)
“We’re looking for a smart system that lets us
interchange and upgrade components to meet
2
new and changing tasks.”
Uniquely Intelligent :-)
“Finally there is a system where key
components can be shared... that’s a
company that is on our side.”
Page 5
MetroMax iQ™ Storage System :-)
Interchangeability: MetroMax i™ and MetroMax Q,
shelves, posts, and most accessories are uniquely
interchangeable making the iQ system adaptable to
your specific application.
Longer-Life Durability and Performance: Corrosion
™
proof MetroMax i
and the performance of stainless steel at a fraction
of the cost. MetroMax Q
and epoxy coated steel design that offers superior
performance versus wire shelving. All shelves can
be cleaned in a fraction of the time of wire.
has an innovative polymer design
™
has an advanced polymer
Designed with innovative polymers for longer-life product performance, easy-to-clean
surfaces to promote a cleaner environment and higher level of safety, interchangeable
components for maximum flexibility, interactive on-line tools...a truly unique way to
improve operational efficiencies, productivity, and ultimately ROI.
Improved Cleanability: iQ System shelves have
removable polymer mats that are easily cleaned in
sinks, wash or dish machines. Cleaner shelves
promote safe environments.
Storage Optimization: iQ System accessories
contain, compartmentalize, and organize your stored
contents to maximize every square inch of storage
space. Smooth polymer components protect fragile
packaged items.
3
Page 6
iQ
MetroMax i™
Uniquely Lifelong...
• Corrosion Proof, Lifetime Warranty Against Corrosion
• Polymer Construction with Stainless Steel Corners
• All Polymer Posts
• Removable, Easily Cleanable Shelf Mats
• Open Grid and Solid Shelves
Interchangeable Posts Interchangeable Shelves
Polymer
Post
Epoxy Coated
Steel Post
MetroMax Q™
Grid Shelf
MetroMax i™
Solid Shelf
MetroMax i™
Grid Shelf
MetroMax i™
Heavy Duty Shelf
Grid or Solid
Selecting system components for your application... it’s a no brainer.
“The choice was easy...
Our facility needed the most
cleanable, most durable,
and totally corrosion proof
system available, and
MetroMax i™ was all that
and cost efficient.”
4
“We put extremely heavy loads
on our MetroMax i Top-Track
system, so we opted for the steel
posts for added rigidity.”
Page 7
MetroMax Q™
Unique Value...
• Quick-to-adjust Shelves Provide
Maximum Space Utilization
• Corrosion Resistant, 15 Year Warranty Against Corrosion
• Epoxy Coated Wire Shelf Frames and Posts
• Removable, Easily Cleanable Shelf Mats
• Open Grid Shelves
Interchangeable
shelves, posts, and
accessories provide
increased storage
“While outfitting a damp
area with shelving, we were able to
upgrade our system; all 4 posts are
now polymer and the bottom shelf is
a Heavy Duty polymer as well... the
units fit perfectly into our budget and
provides long-term value.”
efficiencies.
All shelf mats,
posts, and touch
points have built
in Microban
antimicrobial
product protection.
“We’ve typically purchased standard wire shelving, but these days value is a must. Upgrading to
MetroMax Q is the perfect balance between price
and value. it’s easy to clean and resists rust and
corrosion, for a longer shelf life.”
®
5
Page 8
MetroMax i™
Uniquely Lifelong...
MetroMax i™ Polymer Shelving 9.20
Standard Shelves
• Part number includes shelf with removable mats and one bag of wedges.
Nominal
Width
Nominal
Length
Approx.
Pkd. Wt.
(lb) (kg)
18 457 24 610 8.7 4.0
18 457 30 760 10.5 4.7
18 457 36 914 12.2 5.5
18 457 42 1060 13.9 5.3
18 457 48 1220 15.7 7.1
18 457 54 1372 17.5 7.9
18 457 60 1524 19.2 8.7
18 457 72 1829 22.5 10.2
24 610 24 610 12.2 5.5
24 610 30 760 13.9 6.3
24 610 36 914 15.6 7.1
24 610 42 1060 17.5 7.9
24 610 48 1220 19.3 8.7
24 610 54 1372 21.0 9.5
24 610 60 1524 22.8 10.5
24 610 72 1829 26.0 11.8
Actual Dimensions: Width: Add 1/4" (6mm) to nominal size. Length: Subtract 1/4" (6mm) from nominal size.
Shelf with
Grid Mat
Cat. No.
MX1824G
MX1830G
MX1836G
MX1842G
MX1848G
MX1854G
MX1860G
MX1872G
MX2424G
MX2430G
MX2436G
MX2442G
MX2448G
MX2454G
MX2460G
MX2472G
Approx.
List Price
Each
Pkd. Wt.
(lb) (kg)
119.00 12.7 5.8
121.50 14.5 6.6
124.50 17.2 7.8
151.50 20.1 9.1
153.50 23.1 10.5
174.50 21.5 9.7
176.50 23.2 10.5
213.50 27.5 12.5
150.00 14.2 6.4
152.50 15.9 7.2
155.00 19.6 8.9
184.00 21.5 9.8
184.00 25.3 11.5
220.00 25.0 11.3
220.00 26.8 12.1
264.00 31.0 14.1
Shelf with
Solid Mat
Cat. No.
MX1824F
MX1830F
MX1836F
MX1842F
MX1848F
MX1854F
MX1860F
MX1872F
MX2424F
MX2430F
MX2436F
MX2442F
MX2448F
MX2454F
MX2460F
MX2472F
List Price
Each
133.50
138.00
140.00
166.00
168.00
199.00
201.50
242.00
168.00
171.50
174.50
204.50
204.50
245.00
245.00
294.00
Heavy-Duty Dunnage Shelves
• Weight capacity per shelf evenly distributed: 1,200 lbs. (544kg) on shelves up to and including 48"
(1220mm) long; 900 lbs. (408kg) for shelves 60" (1524mm) long.
Nominal
Width
Nominal
Length
Approx.
Pkd. Wt.
(lb) (kg)
18 457 36 914 18 8.2
18 457 48 1220 22 10.0
18 457 60 1524 26 11.8
24 610 36 914 21 9.5
24 610 48 1220 27 12.2
24 610 60 1524 33 15.0
(Dunnage shelves are not recommended for use as part of an add-on unit with two posts.)
Polymer Posts
• Corrosion proof with built-in Microban antimicrobial
product protection.
• Compatible for use with MetroMax i™ and MetroMax Q shelves.
• Stationary posts include an adjustable leveling foot to
compensate for uneven floors. Leveling foot can be
adjusted 1" (25mm).
Nominal
Height
(in) (mm)
Approx.
Pkd. Wt.
(lb) (kg)
Stationary
Post with
Leveling Foot
Cat. No.
9 228 0.3 0.15
13 370 0.5 0.2
27 685 0.9 0.4
33 875 1.0 0.5
54 1370 1.6 0.7
63 1585 1.8 0.8
74 1890 2.2 1.0
86 2195 3.0 1.4
(Special height cut posts are available. Consult your Metro representative.)
6
Note: MetroMax i™ shelves, posts, and wedges are not compatable with original MetroMax shelves and posts.
MX13P MX13UP
MX27P MX27UP
MX33P MX33UP
MX54P MX54UP
MX63P MX63UP
MX74P MX74UP
MX86P MX86UP
Mobile
Post
for Stem Caster
Cat. No.
MX9UP
Shelf with
Grid Mat
MHP1836G
MHP1848G
MHP1860G
MHP2436G
MHP2448G
MHP2460G
List Price
Each
20.50
23.50
32.00
35.00
39.00
42.00
47.50
55.50
Cat. No.
Approx.
List Price
Each
Pkd. Wt.
(lb) (kg)
138.00 22 10.0
164.00 26 11.8
197.00 30 13.6
168.00 25 11.3
199.50 31 14.1
240.00 37 16.8
MetroMax i
Replacement Wedges
Bag of (4)
Cat. No. MX9985
List Price 9.00 each
MetroMax i™ Wedges are not compatible
with original MetroMax shelves and posts.
Post Clamp
Adds stability by joining posts
of twoseparate units together.
With it, each unit is supported
by four posts and buttressed
by the adjacent unit.
Cat. No. 9994X
List Price 16.20 each
Foot Plate
Use to add stability to the shelving
unit or to bolt units to the floor.
Cat. No. Zinc 9993Z
List Price 11.50 each
Cat. No. Stainless Steel 9993S
List Price 26.00 each
Shelf with
Solid Mat
Cat. No.
MHP1836F
MHP1848F
MHP1860F
MHP2436F
MHP2448F
MHP2460F
™
List Price
Each
152.00
181.00
218.00
189.00
218.00
262.00
Page 9
MetroMax Q™
Unique Value...
MetroMax Q™ Shelving 9.21
Standard Shelves
• Part number includes shelf with removable mats and one bag of wedges.
Nominal
Width
(in) (mm)
18 457 24 610 6.2 2.8
18 457 30 760 8.0 3.6
18 457 36 914 9.7 4.4
18 457 42 1060 11.4 5.2
18 457 48 1220 13.2 6.0
18 457 54 1372 15.0 6.8
18 457 60 1524 16.7 7.6
18 457 72 1829 20.0 9.1
21 530 24 610 8.0 3.6
21 530 30 760 9.7 4.4
21 530 36 914 11.4 5.2
21 530 42 1060 12.8 5.8
21 530 48 1220 14.5 6.6
21 530 54 1372 16.7 7.6
21 530 60 1524 18.5 8.4
21 530 72 1829 21.7 9.9
24 610 24 610 9.7 4.4
24 610 30 760 11.4 5.2
24 610 36 914 13.1 6.0
24 610 42 1060 14.1 6.4
24 610 48 1220 15.8 7.1
24 610 54 1372 18.5 8.4
24 610 60 1524 20.3 9.2
24 610 72 1829 23.5 10.7
Actual Dimensions:Width: Add 3/8” (10mm) to nominal size. Length: Subtract 3/16” (5mm) from
nominal size.
Nominal
Length
(in) (mm)
Approx.
Pkd. Wt.
(lb) (kg)
Shelf with
Grid Mat
Cat. No.
MQ1824G
MQ1830G
MQ1836G
MQ1842G
MQ1848G
MQ1854G
MQ1860G
MQ1872G
MQ2124G
MQ2130G
MQ2136G
MQ2142G
MQ2148G
MQ2154G
MQ2160G
MQ2172G
MQ2424G
MQ2430G
MQ2436G
MQ2442G
MQ2448G
MQ2454G
MQ2460G
MQ2472G
List Price
Each
80.50
84.50
86.50
100.50
100.50
116.50
116.50
141.00
91.50
93.50
96.00
110.00
110.00
131.00
131.00
160.50
97.00
99.50
101.50
124.00
124.00
144.00
144.00
171.00
MetroMax Q™ shelves
that are part of the iQ
system have different
actual measurements
than original MetroMax
Q shelves and cannot
be mixed on the same
shelving units.
Solid Mat Overlays
• Overlays snap onto the open
grid mats to create a solid
surface.
• Available for 21" (530mm)
deep MetroMax Q shelves.
Fits Shelf
(in) (mm)
21x24 530x610 0.35 0.16
21x30 530x760 0.45 0.20
21x36 530x914 0.50 0.23
21x42 530x1060 0.60 0.27
21x48 530x1220 0.70 0.32
21x54 530x1372 0.80 0.36
21x60 530x1524 0.90 0.41
21x72 530x1829 1.00 0.45
Approx.
Pkd. Wt.
(lb) (kg) Cat. No.
Q2124SM
Q2130SM
Q2136SM
Q2142SM
Q2148SM
Q2154SM
Q2160SM
Q2172SM
Steel Posts
• Epoxy coated steel has Microban antimicrobial product protection.
• Stationary posts include an adjustable leveling foot to compensate for uneven floors.
Leveling foot can be adjusted 1" (25mm).
• When mounting a shelving unit to a dolly base, stationary posts are used.
Nominal
Height
(in) (mm)
Approx.
Pkd. Wt.
(lb) (kg)
13 370 1.0 0.5
27 685 2.0 0.9
33 875 2.5 1.1
54 1370 4.0 1.8
63 1585 4.5 2.0
70 1778 5.0 2.3
74 1890 5.5 2.5
86 2195 6.5 2.9
(Special height cut posts are available. Consult your Metro representative.)
Stationary
Post with
Leveling Foot
Cat. No.
MQ13PE MQ13UPE
MQ27PE MQ27UPE
MQ33PE MQ33UPE
MQ54PE MQ54UPE
MQ63PE MQ63UPE
- MQ70UPE
MQ74PE MQ74UPE
MQ86PE MQ86UPE
Mobile
Post for
Stem Caster
Cat. No.
List Price
Each
19.50
23.50
26.50
27.50
31.00
39.50
33.00
37.50
List Price
Each
31.50
32.50
34.00
38.00
38.00
45.50
45.50
54.50
MetroMax Q
™
Replacement Wedges
Bag of (4)
Cat. No. MQ9985
List Price 8.90 each
MetroMax Q™ Wedges are
compatible with original
MetroMax Q shelves and posts.
7
Page 10
MetroMax iQ
un
iQ
ue
Go mobile.
Add casters to any shelving unit to add versatility.
MetroMax iQ Stem Casters 9.25
For use with either MetroMax i polymer or MetroMax Q steel stem caster posts.
• Promotes easy cleaning. Casters allow shelving units to be moved easily for access to floors and walls.
• Efficient Transport: Create a cart to efficiently move supplies throughout a facility or campus.
Polymer Stem Casters 9.25
• Corrosion resistant performance: all-polymer horn, stainless steel axel and hardware, 5" (127mm)
diameter polyurethane wheel, sleeve-style axle bearing, and an optional toe-operated brake
mechanism.
• Models available with antimicrobial product protection built into the tread
• Load rating of 300 lbs. (135kg) and a temperature range from -20° to 120° F (-29° to 49° C)
[continuous].
5PCX
• Bumpers included
Approx. List List
Diameter Width Pkd. Wt. Price Cat. No. Price
Wheel Tread Type (in.) (mm) (in.) (mm) (lbs.) (kg) Cat. No. Each Antimicrobial Each
Polyurethane Swivel 5 127 11/4 32 2 .9 5PCX 72.00 5PCXM 80.00
Polyurethane Brake 5 127 1
Polyurethane Rigid* 5 127 1
*Note 1: Optional tread guards (blue) may be ordered by adding “-TG” to the desired model number (eg. 5PC-TG,5PCB-TG, 5PCR-TG).
*Note 2: Stem casters are shipped with donut bumpers at no extra charge.
*Note 3: Rigid casters are held in place by a connecting channel. When ordering, shelf width must be provided.
1
/4 32 2 .9 5PCBX 78.50 5PCBXM 86.00
1
/4 32 2 .9 5PCRX 78.50
™
Storage System
5PCBX
5MPX
Rigid stem casters
are often ordered
two per unit for
improved tracking
and handling. Rigid
caster channels
are provided with
each two rigid
stem casters at no
charge.
8
Standard Stem Casters 9.25
• Plated caster horns and hardware
• Swivel, Swivel with Brakes, and Rigid Caster options available
Load Approx. List
Rating Pkd. Wt. Price
Type Wheel Tread (lbs.) (kg) (lbs.) (kg) Cat. No. Each
Stem/Swivel Resilient 200 91 23/4 1.2 5MX 30.00
Stem/Brake Resilient 200 91 3 1.4 5MBX 36.00
Stem/Rigid Resilient 200 91 3
Stem/Swivel Polyurethane 300 135 2
Stem/Brake Polyurethane 300 135 2
Stem/Rigid Polyurethane 300 135 2
Stem/Swivel Resilient Donut 250 113 2
Stem/Brake Resilient Donut 250 113 2
Stem/Rigid Resilient Donut 250 113 2
MetroMax iQ bumpers included.
*Note: Rigid casters are held in place by a connecting channel. When ordering, shelf width must be provided.
3
/4 1.7 5MRX 36.00
1
/4 1.0 5MPX 47.00
1
/2 1.1 5MPBX 53.00
1
/4 1.0 5MPRX 53.00
1
/2 1.1 5MDXA 30.00
1
/2 1.1 5MDBXA 36.00
1
/2 1.1 5MDRXA 36.00
Stainless Steel Cart-Washable Stem Casters 9.25
• Stainless horn, axle, and stem with sealed bearings
Load Approx. List
Rating Pkd. Wt. Price
Type Wheel Tread (lbs.) (kg) (lbs.) (kg) Cat. No. Each
Stem/Swivel Polyurethane 300 135 21/8 1.0 5MPXGSA 142.50
Stem/Brake Polyurethane 300 135 2
Stem/Rigid* Polyurethane 300 135 2
*Note: Rigid casters are held in place by a connecting channel. When ordering, shelf width must be provided.
1
/8 1.0 5MPBXGSA 147.50
1
/8 1.0 5MPRXGSA 147.50
Page 11
Interchangeable shelves,
posts, and accessories
provide increased storage
efficiencies.
Handle it.
Adding Stainless Steel handles to shelving puts you in control.
• Use handles on mobile units to improve maneuverability and ergonomics.
• Handles are compatible with MetroMax i™ and MetroMax Q™ units.
• Corrosion proof type 304 stainless steel construction offers long lasting performance.
Tri-Lobal Adapters
Included with handles
Tri-Lobal Adaptor
Replacements
Cat. No. MTLA
Bag of 4 assemblies
List Price 10.00
MTLA adapters are designed to
work with the new MetroMax iQ
Storage System and are not
compatible with original MetroMax
All handles can be
retrofitted to original
MetroMax units. Order
RPMAX-TRIADTR adapters
to connect the handle to
the original posts.
Extended and Easy-Grip
Handles are compatible
with original MetroMax Q
shelves.
Extended Handle 9.25
Fits Shelf
Depth
(in) (mm)
18 457 4.5 113 2.5 1.1
21 530 4.5 113 2.6 1.2
24 610 4.5 113 2.8 1.3
Extension Depth
(post to edge of handle)
(in) (mm)
Approx.
Pkd. Wt.
(lbs.) (kg)
Easy-Grip Handle 9.25
Fits Shelf
Depth
(in) (mm)
18 457 6 151 2.5 1.1
24 610 6 151 3.0 1.4
Extension Depth
(post to edge of handle)
(in) (mm)
Approx.
Pkd. Wt.
(lbs.) (kg)
Swing-up Handle 9.25
• Ideal for maneuvering heavier loads
Fits Shelf
Depth
(in) (mm)
24 610 17.75 447 4.5 2.0
Extension Depth
(post to edge of handle)
(in) (mm)
Approx.
Pkd. Wt.
(lbs.) (kg)
i and Q
Cat. No.
MEH18S
MEH21S
MEH24S
i and Q
Cat. No.
MERGH18S
MERGH24S
i and Q
Cat. No.
MSUH24S
List Price
Each
77.00
79.00
80.50
List Price
Each
85.00
89.00
List Price
Each
129.50
9
Page 12
un
MetroMax i™
with Open Grid Shelves.
iQ
MetroMax i™ Open Grid
Nominal
Width/Length
(in)
18x36 457x914 74 33
18x48 457x1220 86 38
18x60 457x1524 98 44
24x36 610x914 82 37
24x48 610x1220 98 44
24x60 610x1524 114 51
Nominal
Width/Length
(mm)
(lb) (kg)
Approx.
Pkd. Wt.
ue
MetroMax i™
with Solid Shelves.
2-Swivel 2-Brake
Resilient
Rubber Casters
Cat. No.
X336BGX3
X356BGX3
X366BGX3
X536BGX3
X556BGX3
X566BGX3
List Price
Each
797.00
913.00
1,005.00
919.00
1,035.00
1,179.00
MetroMax iQ
Storage System
MetroMax i™ - Stem Caster Carts
• Corrosion proof shelves and posts; removable polymer mats
• Standard Units consist of four shelves, MX63UP posts 63"
(1600mm), wedge connectors and choice of resilient rubber or
polyurethane casters.
• Approximate cart height — 69" (1753mm). Weight capacity of cart:
900 lbs. (408kg) evenly distributed
™
Solid
List Price
928.00
1,040.00
1,174.00
1,066.00
1,186.00
1,348.00
Each
2-Swivel 2-Brake
Poly Casters
Cat. No.
X336EGX3
X356EGX3
X366EGX3
X536EGX3
X556EGX3
X566EGX3
MetroMax i
Approx.
List Price
Each
866.00 94 42
982.00 106 48
1,074.00 118 53
988.00 102 46
1,104.00 118 53
1,248.00 134 60
Pkd. Wt.
(lb) (kg)
Shelves
2-Swivel 2-Brake
Poly Casters
Cat. No.
X336EFX3
X356EFX3
X366EFX3
X536EFX3
X556EFX3
X566EFX3
™
10
MetroMax Q™
with Open Grid Shelves.
MetroMax i™
with a Solid Bottom Shelf.
MetroMax Q - Stem Caster Cart, Open Grid Shelves
• Quick adjust shelves with removable polymer shelf mats.
• Standard Units consist of four open grid shelves, MQ63UPE posts 63" (1600mm), wedge
connectors, and choice of resilient rubber or polyurethane casters.
• Approximate cart height — 69" (1753mm). Weight capacity of cart: 900 lbs.
(408kg) evenly distributed
Nominal
Width/Length
(in)
18x36 457x914 68 31
18x48 457x1220 84 38
18x60 457x1524 100 45
21x36 530x914 74 34
21x48 530x1220 90 41
21x60 530x1524 106 48
24x36 610x914 80 36
24x48 610x1220 96 44
24x60 610x1524 112 51
Nominal
Width/Length
(mm)
Approx.
Pkd. Wt.
(lb) (kg)
2-Swivel 2-Brake
Resilient
Rubber Casters
Cat. No.
Q336BG3
Q356BG3
Q366BG3
Q436BG3
Q456BG3
Q466BG3
Q536BG3
Q556BG3
Q566BG3
List Price
Each
599.00
657.00
721.00
639.00
695.00
779.00
659.00
751.00
831.00
2-Swivel 2-Brake
Poly Casters
Cat. No
Q336EG3
Q356EG3
Q366EG3
Q436EG3
Q456EG3
Q466EG3
Q536EG3
Q556EG3
Q566EG3
668.00
726.00
790.00
708.00
764.00
848.00
728.00
820.00
900.00
Stem Caster Carts with Solid Bottom MetroMax i™ shelves
• 5-tier models with Microban® antimicrobial product protection
• Standard Units consist of 5 shelves (4 open grid, 1 MetroMax i solid), 74" (1880mm) posts, wedge
connectors, and polyurethane casters.
• Approximate cart height — 80" (2032mm). Weight capacity of cart: 900 lbs.
(408kg) evenly distributed
Nominal
Width/Length
(in)
18x36 457x914 82 37
18x48 457x1220 109 49
18x60 457x1524 121 55
24x36 610x914 102 46
24x48 610x1220 123 56
24x60 610x1524 141 63
Nominal
Width/Length
(mm)
Approx.
Pkd. Wt.
(lb) (kg)
i
2-Swivel 2-Brake
Poly Casters
Cat. No.
5X337EGX3
5X357EGX3
5X367EGX3
5X537EGX3
5X557EGX3
5X567EGX3
Approx.
List Price
Each
1,028.00
1,172.00 111 50
1,297.50 123 56
1,184.50
1,330.50
1,515.00 144 65
Pkd. Wt.
(lb) (kg)
85 39
104 47
125 57
Q
2-Swivel 2-Brake
Poly Casters
Cat. No
5Q337EG3
5Q357EG3
5Q367EG3
5Q537EG3
5Q557EG3
5Q567EG3
List Price
1,032.50
1,153.00
List Price
Each
Each
816.00
902.00
999.50
910.50
Page 13
™
MetroMax iQ
Storage System
Push ahead.
Give yourself the versatility you need with Metro Utility Carts.
Utility Carts
• Can be used in a variety of unique transport applications.
• Durable materials, ergonomic handles, and premium casters promote long life and ease of use.
• Microban product protection built into the shelf mats, frames, and posts.
• Easier to clean with removable shelf mats.
MetroMax i™ Utility Carts
• Corrosion proof shelves, posts, and type 304 stainless steel handle.
• Corrosion resistant 5PCX casters with 5" (127mm) polyurethane wheels, polymer horns,
and stainless steel axles.
• 39-1/4" (997mm) tall. Weight capacity of cart: 900 lb. (408kg) evenly distributed.
Nominal
Width/Length
(in)
18x30 457x760 20-5/16 x 34-1/2 516 x 876 2-shelf 35.5 15.8
24x36 610x914 26-5/16 x 40-1/2 668 x 1029 2-shelf 46.0 20.5
18x30 457x760 20-5/16 x 34-1/2 516 x 876 3-shelf 46.0 20.5
24x36 610x914 26-5/16 x 40-1/2 668 x 1029 3-shelf 61.5 27.5
Nominal
Width/Length
(mm)
Actual
Width/Length
(in) (mm) Description
Approx.
Pkd. Wt.
(lb) (kg) Cat. No.
MXUC1830G-25
MXUC2436G-25
MXUC1830G-35
MXUC2436G-35
MetroMax Q™ Utility Carts
• Quick adjust corrosion resistant shelves and posts.
• Corrosion proof type 304 stainless steel handle.
• Includes four 5MPX casters with 5" (127mm) polyurethane wheels.
• 39-1/4" (997mm) tall. Weight capacity of cart: 900 lb. (408kg) evenly distributed.
Nominal
Width/Length
(in)
18x30 457x760 20-5/16 x 34-1/2 516 x 876 2-shelf 35.5 15.8
24x36 610x914 26-5/16 x 40-1/2 668 x 1029 2-shelf 46.0 20.5
18x30 457x760 20-5/16 x 34-1/2 516 x 876 3-shelf 46.0 20.5
24x36 610x914 26-5/16 x 40-1/2 668 x 1029 3-shelf 61.5 27.5
Nominal
Width/Length
(mm)
Actual
Width/Length
(in) (mm) Description
Approx.
Pkd. Wt.
(lb) (kg) Cat. No.
MQUC1830G-25
MQUC2436G-25
MQUC1830G-35
MQUC2436G-35
List Price
Each
748.00
827.00
869.50
982.00
List Price
Each
540.00
586.00
624.50
687.50
Helpful Hints
• Configure a cart to your exact needs using a combination of MetroMax i™ and Q™
shelves and posts.
• Consider MetroMax i solid shelves when spill containment is required or to protect
supplies from dirt during transport.
• A typical utility cart will be configured using 27" (685mm) or 33" (875mm) stem
caster posts with 5" casters.
Shelves and posts: page #6-7 Casters: page #8 Handles: page #9
Solid bottom shelf and
5PCX / 5PCBX casters pictured
11
Page 14
un
iQ
ue
MetroMax iQ
MetroMax i™ Shelving
Starter and Add-on Units
• Save time and money by eliminating adjacent posts and
replacing with “S” hooks.
• Starter Units consist of four posts and indicated number of MetroMax i shelves.
• Add-On Units consist of two posts, indicated number of shelves, and two “S”
Hooks per shelf, for attaching shelf to adjacent unit. To attach shelves at right
angles, Intermediate “S” Hook Kits must be ordered separately.
Storage System
™
Add-on units with “S” hooks can only be attached to
shelves supported by two or more posts.
“S” Hook
Add on shelving to existing
units using two posts instead
of four. Kit includes one “S”
hook and one corner collar
“S” Hook
Cat. No. M9995
plug. Two kits required per
storage level when configuring
units end-to-end.
Cat. No. M9995
List Price 4.00 each
MetroMax i™
Intermediate “S”
Hook Kit
Required when joining units at
Intermediate ‘S” Hook Kit
Cat. No. MX9996
Collar plug
fits MetroMax i
12
right angles with open corner
and no post. Intermediate
bracket connects a shelf
corner to the front beam
of the adjoining shelf. Kit
includes one intermediate
bracket, two “S” Hooks,
and two corner collar plugs.
See illustration for quantity
required per level.
Cat. No. MX9996
List Price 10.20 each
END-TO END
“S” Hook Kits (M9995-qty. 2)
RIGHT ANGLES
Intermediate “S” Hook Kit (MX9996- qty. 1)
Add-On Unit
Intermediate bracket
Starter
Unit
Shelving Starter and Add-On Units — Easy Order Guide
5 Shelves
74" (1880mm) Posts
18" (457mm) Wide 24" (610mm) Wide
Starter Add-On Starter Add-On
24" Cat. No. 5X317GX3 5AX317GX3 5X517GX3 5AX517GX3
(610mm) List Price Each
Long Wt. lbs. (kg) 60 (27) 55 (25) 65 (29) 60 (27)
30" Cat. No. 5X327GX3 5AX327GX3 5X527GX3 5AX527GX3
(760mm) List Price Each
Long Wt. lbs. (kg) 65 (29) 60 (27) 80 (36) 75 (34)
36" Cat. No. 5X337GX3 5AX337GX3 5X537GX3 5AX537GX3
(914mm) List Price Each
Long Wt. lbs. (kg) 70 (32) 65 (29) 85 (39) 80 (36)
42" Cat. No. 5X347GX3 5AX347GX3 5X547GX3 5AX547GX3
(1066mm) List Price Each
Long Wt. lbs. (kg) 80 (36) 75 (34) 95 (43) 90 (41)
48" Cat. No. 5X357GX3 5AX357GX3 5X557GX3 5AX557GX3
(1219mm) List Price Each
Long Wt. lbs. (kg) 90 (41) 85 (39) 105 (48) 100 (45)
60" Cat. No. 5X367GX3 5AX367GX3 5X567GX3 5AX567GX3
(1524mm) List Price Each
Long Wt. lbs. (kg) 110 (50) 105 (48) 115 (52) 110 (50)
72" Cat. No. 5X377GX3 5AX377GX3 5X577GX3 5AX577GX3
(1825mm) List Price Each
Long Wt. lbs. (kg) 125 (57) 120 (54) 145 (66) 140 (64)
Note: “Right Angle” Add-On Units require one additional Intermediate “S” Hook kit per shelf level.
“S” hook
Regular “S” Hook location
Intermediate bracket location
Post
Post not required
Add-On UnitStarter Unit
COMBINATION
Intermediate “S” Hook Kit (MX9996- qty. 2)
Starter Unit
Add-On
Unit
785.00
730.00
940.00
797.50 742.50 952.50 897.50
812.50 757.50 965.00 910.00
947.50 892.50 1,110.00 1,055.00
957.50 902.50 1,110.00 1,055.00
1,072.50 1,017.50 1,290.00 1,235.00
1,257.50 1,202.50 1,510.00 1,455.00
Add-On Unit
Intermediate
bracket
885.00
Page 15
™
MetroMax iQ
Storage System
MetroMax Q™ Shelving
Starter and Add-on Units
• Save time and money by eliminating adjacent posts and
replacing with “S” hooks.
• Starter Units consist of four posts and indicated number of
MetroMax Q shelves.
• Add-On Units consist of two posts, indicated number of shelves, and two
“S” Hooks per shelf, for attaching shelf to adjacent unit. To attach shelves
at right angles, Intermediate “S” Hook Kits must be ordered separately.
END-TO END
“S” Hook Kits (M9995-qty. 2)
“S” hook
Regular “S” Hook location
Intermediate bracket location
Post
Post not required
Add-On UnitStarter Unit
RIGHT ANGLES
Intermediate “S” Hook Kit (Q9995Z- qty. 1)
“S” Hook Kits (M9995-qty. 1)
COMBINATION
Intermediate “S” Hook Kit (Q9995Z- qty. 2)
“S” Hook Kits (M9995-qty. 2)
Add-on units with “S” hooks can only be attached to
shelves supported by two or more posts.
“S” Hook
Add on shelving using two posts instead of
four. Includes one “S” hook and one corner
collar plug. Two kits required per level when
configuring units end-to-end.
Cat. No. M9995 List Price 4.00 each
“S” Hook – Cat. No. M9995
Starter
Unit
Add-On Unit
Intermediate bracket
Starter Unit
Add-On Unit
Intermediate
bracket
MetroMax Q™ Intermediate
“S” Hook Kit
Add-On
Unit
Shelving Starter and Add-On Units — Easy Order Guide
5 Shelves
74" (1880mm) Posts
18" (457mm) Wide 21" (530mm) Wide 24" (610mm) Wide
Starter Add-On Starter Add-On Starter Add-On
24" Cat. No. 5Q317G3 5AQ317G3 5Q417G3 5AQ417G3 5Q517G3 5AQ517G3
534.50
554.50
564.50
634.50
634.50
714.50
837.00
(610mm) List Price Each
Long Wt. lbs. (kg) 50.4 (23) 40.4 (18) 56.4 (26) 46.4 (21) 56.4 (26) 46.4 (21)
30" Cat. No. 5Q327G3 5AQ327G3 5Q427G3 5AQ427G3 5Q527G3 5AQ527G3
(760mm) List Price Each
Long Wt. lbs. (kg) 57.9 (26) 47.9 (22) 63.1 (29) 53.1 (24) 66.4 (30) 56.4 (26)
36" Cat. No. 5Q337G3 5AQ337G3 5Q437G3 5AQ437G3 5Q537G3 5AQ537G3
(914mm) List Price Each
Long Wt. lbs. (kg) 65.4 (30) 55.4 (25) 70.9 (32) 60.9 (28) 76.4 (35) 65.4 (30)
42" Cat. No. 5Q347G3 5AQ347G3 5Q447G3 5AQ447G3 5Q547G3 5AQ547G3
(1066mm) List Price Each
Long Wt. lbs. (kg) 72.9 (33) 62.9 (29) 82.1 (37) 72.1 (33) 86.4 (39) 78.4 (36)
48" Cat. No. 5Q357G3 5AQ357G3 5Q457G3 5AQ457G3 5Q557G3 5AQ557G3
(1219mm) List Price Each
Long Wt. lbs. (kg) 80.4 (36) 70.4 (32) 89.4 (41) 79.4 (36) 96.4 (44) 86.4 (39)
60" Cat. No. 5Q367G3 5AQ367G3 5Q467G3 5AQ467G3 5Q567G3 5AQ567G3
(1524mm) List Price Each
Long Wt. lbs. (kg) 95.4 (43) 85.4 (39) 106.4 (48) 96.4 (44) 116.4 (53) 106.4 (48)
72" Cat. No. 5Q377G3 5AQ377G3 5Q477G3 5AQ477G3 5Q577G3 5AQ577G3
(1825mm) List Price Each
Long Wt. lbs. (kg) 110.4 (50) 100.4 (46) 121.4 (55) 111.4 (51) 136.4 (62) 126.4 (57)
517.50
537.50
547.50
617.50
617.50
697.50
820.00
Use when configuring MetroMax Q Starter
and Add-On Units at right angles.
Cat. No. Q9995Z List Price 4.90 each
589.50
599.50
612.00
682.00
682.00
787.00
934.50
572.50
582.50
595.00
665.00
665.00
770.00
917.50
617.00
629.50
639.50
752.00
752.00
852.00
987.00
Intermediate“S” Hook Kit
Cat. No. Q9995Z
600.00
612.50
622.50
735.00
735.00
835.00
970.00
13
Page 16
™
MetroMax iQ
Storage System
A
B
D
Organize.
Organize supplies to improve operational efficiencies.
C
E
• Well-organized storage results in fewer expired supplies and less waste.
• Innovative shelf and accessory designs have smooth surfaces that protect vacuum
sealed and other packaged items from damage.
• Flexible compartments help sort supplies for faster access and maximize the use of
storage space.
A Dividers B Ledges C Enclosure Panels D Metro Totes E Metro Bins
Flexible Compartments
Dividers and Ledges can be used to create flexible compartments that most efficiently use available
storage space. When combined with open grid shelves this minimizes dust accumulation.
Bins offer removable compartmentalized storage for easy access or as part of an exchange system.
8" (203mm) Shelf Dividers – standard duty 9.25
• i and Q versions available
• Use to create organized compartments or to simply separate shelf
contents.
• Easily repositioned on grid and solid shelves
• Corrosion proof
Nominal
Length
(in) (mm)
18 457 1.3 0.6
24 610 1.6 0.7
*Note: Can be retrofitted to original MetroMax and MetroMax Q.
Approx.
Pkd. Wt.
(lb) (kg)
i
Cat. No.
MXD18-8 MQD18-8
MXD24-8 MQD24-8
Q
Cat. No.
List
Price
Each
17.50
19.50
14
Universal 8" (203mm) Shelf Dividers –
light duty, for open grid shelves 9.25
• For use with MetroMax i and Q grid shelves, Super Erecta wire shelves, and Super
Adjustable wire shelves.
• Maximum flexibility: Can be repositioned along the entire shelf.
• Each divider includes a panel and two clips to connect to any open grid or wire shelf.
Does not attach to solid shelves.
• Corrosion proof.
Nominal
Length
(in) (mm) Fits Shelf Depth
18 457 18", 21" (457, 530mm) 1.3 0.6
24 610 24" (610mm) 1.6 0.7
*Note: Can be retrofitted to original MetroMax and MetroMax Q.
Additional clips: Cat. No DCLIP, 2 per bag, List Price 5.00
Approx.
Pkd. Wt.
(lb) (kg)
i and Q
Cat. No.
MUD18-8
MUD24-8
List
Price
Each
17.50
19.50
Page 17
Accessorize.
Shelf-to-Shelf Dividers 9.25
• Full height dividers efficiently compartmentalize the space between two shelves.
• Smooth surfaces protect packaged items from damage.
• Corrosion proof.
• Compatible with MetroMax i and Q open grid shelves, Super Erecta wire shelves,
and Super Adjustable wire shelves. Does not work with solid shelves.
Fits Shelf Depth
(in) (mm)
18", 21" 457, 530 16 406 2.3 1.0
18", 21" 457, 530 20 508 2.5 1.1
18", 21" 457, 530 24 610 3.8 1.7
24" 610 16 406 2.8 1.2
24" 610 20 508 3.0 1.3
24" 610 24 610 4.4 2.0
*Note: Can be retrofitted to original MetroMax and MetroMax Q shelves.
*Note: -16 parts have three panels, -20 parts have four panels, -24 parts have five panels
Nominal Height
(in) (mm)
Approx.
Pkd. Wt.
(lb) (kg)
i and Q
Cat. No.
MD18-16
MD18-20
MD18-24
MD24-16
MD24-20
MD24-24
2" (51mm) Stackable Shelf Ledges 9.25
• Prevent items from falling off shelves.
• Snap on and off quickly. Easily stacked to contain larger items.
• Corrosion proof.
• Ships assembled.
Nominal Length
(in) (mm) Type
18 457 Side 0.50 0.2
21 530 Side 0.50 0.2
24 610 Side 0.50 0.2
24 610 Back 0.50 0.2
30 760 Back 0.75 0.3
36 914 Back 1.00 0.4
42 1066 Back 1.25 0.6
48 1219 Back 1.25 0.6
54 1370 Back 1.50 0.7
60 1524 Back 1.75 0.8
72 1829 Back 2.00 0.9
*Note: MetroMax i wire ledges can be retrofitted to original MetroMax
*Note: MetroMax Q wire ledges (MQ-) cannot be retrofitted to original MetroMax Q
Approx.
Pkd. Wt.
(lb) (kg)
i
Cat. No.
MXLS18-2S MQLS18-2S
- MQLS21-2S
MXLS24-2S MQLS24-2S
MXL24-2S MQL24-2S
MXL30-2S MQL30-2S
MXL36-2S MQL36-2S
MXL42-2S MQL42-2S
MXL48-2S MQL48-2S
MXL54-2S MQL54-2S
MXL60-2S MQL60-2S
MXL72-2S MQL72-2S
Cat. No.
List
Price
Each
46.00
51.00
56.00
50.00
55.00
60.00
Q
List
Price
Each
18.50
19.00
19.50
19.50
21.50
25.00
30.50
30.50
34.00
34.00
39.00
4" (102mm) Solid Clear Stackable Shelf Ledges 9.26
• Solid design helps contain small items.
• Clear plastic allows light penetration and visible access to supplies.
• Corrosion proof.
• Ships assembled.
Nominal Length
(in) (mm) Type
18 457 Side 0.50 0.2
21 530 Side 0.50 0.2
24 610 Side 0.50 0.2
24 610 Back 0.50 0.2
30 760 Back 0.75 0.3
36 914 Back 1.00 0.4
42 1066 Back 1.25 0.6
48 1219 Back 1.25 0.6
54 1370 Back 1.50 0.7
60 1524 Back 1.75 0.8
*Note: MetroMax i clear ledges can be retrofitted to original MetroMax
*Note: MetroMax Q clear ledges (MQ-) cannot be retrofitted to original MetroMax Q
Approx.
Pkd. Wt.
(lb) (kg)
i
Cat. No.
MXLS18-4P MQLS18-4P
- MQLS21-4P
MXLS24-4P MQLS24-4P
MXL24-4P MQL24-4P
MXL30-4P MQL30-4P
MXL36-4P MQL36-4P
MXL42-4P MQL42-4P
MXL48-4P MQL48-4P
MXL54-4P MQL54-4P
MXL60-4P MQL60-4P
Q
Cat. No.
15
Page 18
MetroMax iQ
Storage System
Contain it.
Efficiently enclose and contain
with Enclosure Panels.
Enclosure Panels 9.25
• An efficient way of enclosing the sides and back of all shelves in
a unit to contain stored contents.
• Slot opening: 3" W x 3-7/8" H
• Designed to work with MetroMax i™ and MetroMax Q shelves.
Mounting clips included.
™
Use shelf to shelf
dividers with enclosure
panels to create full
height compartments to
organize bulky, hard-to-
handle supplies.
Actual
Width/Height
(in) (mm)
12-3/8 x 51-1/4 315 x 1300 54 1370 18 457 6-1/4 2.8
12-3/8 x 59-1/4 315 x 1505 63 1600 18 457 7 3.2
12-3/8 x 71-1/4 315 x 1810 74 1880 18 457 8-3/4 4.0
18-3/8 x 51-1/4 467 x 1300 54 1370 21, 24 530, 610 9 4.1
18-3/8 x 59-1/4 467 x 1505 63 1600 21, 24 530, 610 10-1/4 4.7
18-3/8 x 71-1/4 467 x 1810 74 1880 21, 24 530, 610 11-3/4 5.3
*Note: Can be retrofitted to original MetroMax and MetroMax Q shelving
Panels Required to Enclose Both ends of the Shelving Unit or Cart
Post Height
54" (1370mm) (2) MEP35E (2) MEP55E (2) MEP55E
63" (1600mm) (2) MEP36E (2) MEP56E (2) MEP56E
74" (1880mm) (2) MEP37E (2) MEP57E (2) MEP57E
Post Height
54" (1370mm) (2) MEP35E
63" (1600mm) (2) MEP36E
74" (1880mm) (2) MEP37E
18"
(457mm)
Panels Required to Enclose Back of Shelving Unit or Cart
30"
(760mm)
Post Height
(in) (mm)
Shelf Width
21"
(530mm)
36"
(914mm)
(1) MEP35E
(1) MEP55E
(1) MEP36E
(1) MEP56E
(1) MEP37E
(1) MEP57E
For use with
24"
(610mm)
42"
(1066mm)
(2) MEP55E
(2) MEP56E
(2) MEP57E
Shelf Width
(in) (mm)
Configuration Notes
1. Handles and enclosure panels can be used on the same end
of the cart. Please note the following details: 21" (530mm)
wide units: use the 12-3/8 (315mm) wide panel on the same
end as the handle.
2. Top-Track: When using on the ends of a Top- Track mobile
unit the enclosure panel must be mounted so that it does
not interfere with the overhead tracks. Mobile posts on TopTrack are 74" (1880mm). The standard enclosure panel for
74"(1880mm) posts can be used but must be mounted in a
lower position on the unit. As an al ternative, the standard
panels for a 63" (1600mm) post can be used.
Shelf Length
48"
(1219mm)
(2) MEP35E
(1) MEP55E
(2) MEP36E
(1) MEP56E
(2) MEP37E
(1) MEP57E
Approx.
Pkd. Wt.
(lbs) (kg)
54"
(1370mm)
(1) MEP35E
(2) MEP55E
(1) MEP36E
(2) MEP56E
(1) MEP37E
(2) MEP57E
i and Q
Cat. No.
MEP35E
MEP36E
MEP37E
MEP55E
MEP56E
MEP57E
60"
(1524mm)
(3) MEP55E
(3) MEP56E
(3) MEP57E
List Price
Each
81.50
85.00
94.00
88.00
98.00
101.50
72"
(1825mm)
(1) MEP35E
(3) MEP55E
(1) MEP36E
(3) MEP56E
(1) MEP37E
(3) MEP57E
16
Enclosure Panel
x 8
MetroMax i
™
Mounting Clip
Replacements
Cat. No. RPMX3-RODTAB
x 1
MetroMax Q™ Mounting
and Bottom Adapter Clips
Replacements
Cat. No. RPMQ3-RODTAB
x 8
Page 19
Find it.
Label Holders
• Plastic holders snap onto shelf edge to accommodate 1"
(25mm) tall adhesive label. Label not included.
• i and Q versions available.
• Optional label holder covers exist for MetroMax Q models.
Cover snaps onto the label holder to hold a non-adhesive label
in place or to protect any label from dirt and moisture
MetroMax i™ 9.25
Height: 1" (25mm)
Actual Length
(in) (mm)
4-1/2 114 All All 0.03 0.01
11-9/32 285 24 610 0.14 0.06
17-9/32 438 30 760 0.24 0.10
23-9/32 590 36 914 0.30 0.13
29-9/32 742 42 1060 0.35 0.15
35-9/32 895 48 1219 0.40 0.18
41-9/32 1047 54 1370 0.45 0.20
Fits Shelf Length
(in) (mm)
Approx.
Pkd. Wt.
(lbs.) (kg)
Label Holder
Cat. No.
9989PX
9989X1
9989X2
9989X3
9989X4
9989X5
9989X6
List Price
Each
4.50
7.90
10.20
12.40
14.00
16.80
17.90
MetroMax i™ Label Holder
MetroMax Q™ 9.25
Height: 1-1/2" (37mm)
Actual Length
(in) (mm)
4 102 All All 0.03 0.01
17-5/8 448 24 610 0.14 0.06
23-5/8 600 30 760 0.24 0.10
29-5/8 752 36 914 0.30 0.13
35-5/8 905 42 1060 0.35 0.15
41-5/8 1057 48 1219 0.40 0.18
47-5/8 1210 54 1370 0.45 0.20
53-5/8 1362 60 1524 0.50 0.22
59-5/8 1514 72 1825 0.60 0.27
Fits Shelf Length
(in) (mm)
Approx.
Pkd. Wt.
(lbs.) (kg)
Color Shelf Markers 9.25
• Attach easily to shelf for content identification.
• Use to assign color coding to individual shelf
levels, shelving units, carts, or storage areas.
• i and Q versions available.
• 6" (152mm) length.
Shelf
Marker
Color
Blue 0.05 0.02
Green 0.05 0.02
Red 0.05 0.02
Tan 0.05 0.02
White 0.05 0.02
Yellow 0.05 0.02
Gray 0.05 0.02
Approx.
Pkd. Wt.
(lbs.) (kg)
i
Cat. No.
CSM6-BX CSM6-BQ
CSM6-GX CSM6-GQ
CSM6-RX CSM6-RQ
CSM6-TX CSM6-TQ
CSM6-WX CSM6-WQ
CSM6-YX CSM6-YQ
CSM6-GRX CSM6-GRQ
Q
Cat. No.
List Price
Label Holder
Each
5.00
5.00
5.00
5.00
5.00
5.00
5.00
Cat. No.
Q04LH
Q24LH
Q30LH
Q36LH
Q42LH
Q48LH
Q54LH
Q60LH
Q72LH
Label Holder
List Price
Each
4.40
10.00
10.00
11.30
16.00
16.00
18.50
18.50
21.00
Cover
Cat. No.
Q04LHC
Q24LHC
Q30LHC
Q36LHC
Q42LHC
Q48LHC
Q54LHC
Q60LHC
-
List Price
Each
3.90
6.00
6.50
7.00
9.20
9.20
11.30
11.30
-
MetroMaxQ™ Label Holder
Blue Green Red Tan
White Yellow Gray
17
Page 20
un
MetroMax iQ
iQ
ue
Super Slide 9.25
• Designed to fit a 24" 610mm) wide shelf.
• Easily attaches to the shelf frame (under the mats) and is sized to hold 3", 5", 6", and 8"
(76, 127, 152, 203mm) tall tote boxes.
• MetroMax i™ and Q models available.
• Corrosion resistant taupe epoxy finish with Microban antimicrobial product protection.
Storage System
™
Width
(in) (mm)
20-3/8 520 21-5/8 550 10-1/4 260 5-1/4 2
Length
(in) (mm)
Height
(in) (mm)
Approx. Pkd. Wt.
(lb) (kg)
i
Cat. No.
MXSS2E
List Price
Each
116.00
Cat. No.
MQSS2E
Undershelf Slide 9.25
• Available for MetroMax i only.
• Easily attaches to the MetroMax i™ shelf frame to allow you create a more versatile
storage system.
• Tote box can serve as a drawer on mobile units or utility carts.
• Aluminum finish
Fits Shelf Width
(in) (mm)
18 457 22-3/4 578 3-1/4 1.5
24 610 17-3/4 451 3-3/4 1.7
Length
(in) (mm)
Approx. Pkd. Wt.
(lb) (kg)
i
Cat. No.
BSD2218XA
BSD2224XB
List Price
Each
124.50
127.00
Adjustable Slides 9.25
• Slides can be adjusted left to right to accommodate a variety of pan, tray,
and container sizes.
• MetroMax i™ and Q models available.
• Corrosion resistant taupe epoxy finish with Microban antimicrobial
product protection.
• Shelves must be spaced 20" (508mm) apart.
• Can be used in conjunction with 20" (508mm) tall shelf-to-shelf dividers.
Q
List Price
Each
106.50
18
Fits Shelf Width
(in) (mm)
18 457 Adjustable 10-3/4 5
24 610 Adjustable 12-3/4 6
Length
(in) (mm)
Approx. Pkd. Wt.
(lb) (kg)
i
Cat. No.
MX18SE
MX24SE
List Price
Each
113.50
116.00
Q
Cat. No.
MQ18SE
MQ24SE
List Price
Each
104.50
106.50
Can Rack System 9.25
• Front loading, front dispensing can rack holds eight #10 cans or twelve #5 cans.
• Tough, corrosion resistant taupe epoxy finish with Microban antimicrobial product protection.
• Designed to fit a 24" (610mm) wide shelf
• Mounts on any MetroMax i™ or MetroMax Q shelf
Overall
Width/Length/Height
(in) (mm)
7-7/8 x 25-5/16 x 15 200 x 643 x 381 10 4.5
Approx.
Pkd. Wt.
(lb) (kg)
i and Q
Cat. No.
CR24E
List
Price
Each
98.00
Page 21
™
MetroMax iQ
Storage System
Storage Level Frames 9.25
• Open four sided frames accommodate drop-in accessories including wire baskets
and stainless drying racks.
• Includes corrosion proof MetroMax i™ frame and a bag of wedges
Nominal Exterior
Width
(in) (mm)
Nominal Exterior
Length
(in) (mm)
Frame Interior
Width/Length
(in) (mm)
Approx. Pkd. Wt.
(lb) (kg)
18 457 24 610 18x20 457x510 4-3/4 2.2
18 457 30 760 18x26 457x660 6 2.7
18 457 36 914 18x32 457x810 7 3.2
18 457 42 1060 18x38 457x965 8-1/4 3.8
18 457 48 1220 18x44 457x1120 9-1/2 4.3
18 457 54 1372 18x50 457x1219 10-1/2 4.8
18 457 60 1524 18x56 457x1370 11-3/4 5.3
18 457 72 1829 18x68 457x1725 14 6.4
24 610 24 610 24x20 610x510 7-1/2 3.4
24 610 30 760 24x26 610x660 9-1/2 4.3
24 610 36 914 24x32 610x810 11-1/4 5.1
24 610 42 1060 24x38 610x965 13-1/4 6
24 610 48 1220 24x44 610x1120 15 6.8
24 610 54 1372 24x50 610x1219 17 7.7
24 610 60 1524 24x56 610x1370 18-3/4 8.5
24 610 72 1829 24x68 610x1725 22-1/2 10.2
Wire Baskets 9.25
• Conveniently hold small items
• 9" (229mm) deep
• Built in storage handles allow easy removal
• Corrosion resistant taupe epoxy finish
Width
(in) (mm)
Length
(in) (mm)
18 457 16 406 9 4.1
18 457 22 560 10 4.5
24 610 16 406 10 4.5
24 610 22 560 12 5.5
Approx. Pkd. Wt.
(lb) (kg)
Cat. No.
MB1816XE
MB1822XE
MB2416XE
MB2422XE
List Price
Each
95.00
108.50
100.00
114.50
i and Q
Cat. No.
M4F1824
M4F1830
M4F1836
M4F1842
M4F1848
M4F1854
M4F1860
M4F1872
M4F2424
M4F2430
M4F2436
M4F2442
M4F2448
M4F2454
M4F2460
M4F2472
List Price
Each
90.50
100.00
106.00
121.50
121.50
139.00
139.00
162.00
107.00
116.00
121.50
132.50
132.50
153.50
153.50
189.00
Configuration Chart
QTY to fill out shelf frame.
FRAME B1816XE B1822XE B2416XE B2422XE
M4F1836 2
M4F1842 1 1
M4F1848 2
M4F1860 2 1
M4F1872 3
M4F2436 2
M4F2442 1 1
M4F2448 2
M4F2460 2 1
M4F2472 3
3-sided frames 9.25
• 1" (25mm) x 1-1/2" (38mm) structural steel tubing. Includes tri-lobal adapters
to attach to posts. (Replacement adapters: Cat. No. MTLA, bag of 4)
• Corrosion resistant taupe epoxy finish.
• Use when configuring work tables or as a 3-sided ledge to contain bulky items.
Width
(in) (mm)
Length
(in) (mm)
18 457 24 610 11 5
18 457 30 760 12 5.4
18 457 36 914 13 5.7
18 457 48 1220 15 6.6
18 457 60 1524 18 8.2
24 610 24 610 12 5.4
24 610 30 760 13 5.7
24 610 36 914 14 6.4
24 610 48 1220 18 8.2
24 610 60 1524 20 9.1
Approx. Pkd. Wt.
(lb) (kg)
i and Q
Cat. No.
M3TF1824E
M3TF1830E
M3TF1836E
M3TF1848E
M3TF1860E
M3TF2424E
M3TF2430E
M3TF2436E
M3TF2448E
M3TF2460E
List Price
Each
85.00
86.00
88.00
92.50
108.50
89.00
91.50
92.50
97.00
117.00
19
Page 22
un
MetroMax iQ
iQ
ue
MetroMax i™ Drying Rack Unit 9.31
• Allows superior air circulation and fast drying of trays, pans, lids, pots and all pot sink items.
• Promotes food safety by eliminating moisture. Offers an efficient organized drying area.
• Includes two drop-ins (Cat. No. DR48S) and one cutting board/tray drying rack
(Cat. No. MTR2448XE).
Stationary Unit
Width
(in) (mm)
24 610 48 1219 75-1/2 1917 106 49
Mobile Unit
Width
(in) (mm)
24 610 48 1219 69 1917 106 49
Length
(in) (mm)
Length
(in) (mm)
Height
(in) (mm)
Height
(in) (mm)
Approx. Pkd. Wt.
(lb) (kg)
Approx. Pkd. Wt.
(lb) (kg)
i
Cat. No.
PR48X3
i
Cat. No.
PR48VX3
Storage System
List Price
Each
1,550.00
List Price
Each
1,827.00
™
Stainless Steel Drop-in Racks 9.25
• Open wire design provides air flow to safely dry pots, pans, and containers
• To create a storage level with a stainless drop-in order the following
Qty. 1 Drop-in rack
Qty. 1 4-sided MetroMax i™ frame
Qty. 1 MetroMax i™ center beam
• Can be retrofitted to existing MetroMax i™ shelves. Simply remove the
mats and drop in the stainless drying rack.
• Center beams: RPMX36-CBEAM, RPMX48-CBEAM, RPMX60-CBEAM
Width
(in) (mm)
24 610 33-7/8 854 5-1/4 133 3/4 19 9 4.1
24 610 45-7/8 1156 5-1/4 133 3/4 19 12 5.4
24 610 57-7/8 1458 5-1/4 133 3/4 19 15 6.8
*Note: Can be retrofitted to original MetroMax and MetroMax Q.
Length
(in) (mm)
Height
(in) (mm)
Wire Spacing
(in) (mm)
Approx. Pkd. Wt.
(lb) (kg) Cat. No.
DR36S
DR48S
DR60S
Cutting Board and Tray Drying Rack 9.25
• Rack is mounted to standard MetroMax i™ or MetroMax Q shelf
• Promotes safe air drying of cutting boards and trays
• 1-1/8" (28mm) and 3" (76mm) slide spacing available
Fits Shelf
(in) (mm)
24x36 457x914 1-1/8 28 6 150 24 13.5 6.1
24x48 457x1219 1-1/8 28 6 150 34 18.0 8.2
24x60 457x1524 1-1/8 28 6 150 42 22.5 10.2
24x36 457x914 3 76 6 150 10 9.8 4.4
24x48 457x1219 3 76 6 150 14 13 5.9
24x60 457x1524 3 76 6 150 17 16.3 7.4
*Note: Can be retrofitted to original MetroMax and MetroMax Q.
Upright Spacing
(in) (mm)
Upright Height
(in) (mm) Tray Capacity
Approx. Pkd. Wt.
(lb) (kg)
MTR2436XE
MTR2448XE
MTR2460XE
MTR2436XEA
MTR2448XEA
MTR2460XEA
i and Q
Cat. No.
List Price
Each
234.00
281.00
337.00
List Price
Each
85.00
103.50
119.00
80.00
97.00
115.00
20
Page 23
™
MetroMax iQ
Storage System
Security.
MetroMax Q Security Units 14.01
Protects valuable materials and sensitive items from loss or pilferage.
• Ready view of contents: Heavy gauge open wire construction keep contents
visible at all times, making it easy to check inventory.
• Microban antimicrobial product protection is built into the enclosures, doors,
handles, and shelves to keep the product “cleaner between cleanings.”
• Optional intermediate shelves: MetroMax Q quick adjust shelves or corrosion
proof MetroMax i.
• Double door with ergonomic ¼-turn handle: Each door opens 270 degrees
and can be secured along the sides of the unit.
• Shipped knocked down to save on freight costs. Assembles in minutes.
MQSEC53VE with optional
intermediate shelves
MetroMax Q Stationary Units– 66-3/16" (1681mm) High
Actual Outside Dimensions
(Including Handle)
Width
(in) (mm)
Length
(in) (mm)
Fits Shelf
(in) (mm)
26-15/16 685 38-7/8 987 24x36 610x914 148 67
26-15/16 685 50-7/8 1292 24x48 610x1219 156 71
26-15/16 685 62-7/8 1597 24x60 610x1524 161 73
Approx. Pkd. Wt.
(lb) (kg) Cat. No.
MQSEC53E
MQSEC55E
MQSEC56E
Note: Leveling foot on post can be adjusted up to 1" (25mm) to compensate for uneven floors.
MetroMax Q Stem Caster Mobile Units– 67-13/16" (1723mm) High
Actual Outside Dimensions
(Including Bumpers and Handle)
Width
(in) (mm)
Length
(in) (mm)
Fits Shelf
(in) (mm)
Approx. Pkd. Wt.
(lb) (kg)
27-13/16 707 40-3/4 1035 24x36 610x914 166 75
27-13/16 707 52-3/4 1340 24x48 610x1219 176 80
27-13/16 707 64-3/4 1645 24x60 610x1524 179 81
Includes (4) 5”
(127mm) Diameter
Swivel Casters
Cat. No.
MQSEC53DE
MQSEC55DE
MQSEC56DE
Note: DE models use four 5MP casters.
Note: VE models use two 5PCX and two 5PCBX casters.
MetroMax Q Heavy-Duty Mobile Units– 68-1/2" (1740mm) High
Mounted on an aluminum dolly with 5" (127mm) plate casters and wraparound bumpers.
Actual Outside Dimensions
(Including Handle)
Width
(in) (mm)
Length
(in) (mm)
Fits Shelf
(in) (mm)
Approx. Pkd. Wt.
(lb) (kg) Cat. No.
28-1/16 713 39-1/8 994 24x36 610x914 166 75
28-1/16 713 51-1/8 1299 24x48 610x1219 176 80
28-1/16 713 63-1/8 1603 24x60 610x1524 179 81
MQSEC53LE
MQSEC55LE
MQSEC56LE
Note: The aluminum dollies used on the LE models have two B5P and two B5PB plate casters.
Intermediate Shelves
Width
(in) (mm)
Length
(in) (mm)
24 610 36 914
24 610 48 1220
24 610 60 1524
i
Shelf with
Grid Mat
Cat. No.
MX2436G
MX2448G
MX2460G
List Price
Each
155.00
184.00
220.00
i
Shelf with
Solid Mat
Cat. No.
MX2436F
MX2448F
MX2460F
List Price
Each
174.50
204.50
245.00
Q
Shelf with
Grid Mat
Cat. No.
MQ2436G
MQ2448G
MQ2460G
List Price
Each
1349.50
1680.50
1823.00
List Price
Each
1556.50
1886.50
2029.00
List Price
Each
1771.50
2121.00
2282.50
List Price
Each
101.50
124.00
144.00
tri-lobal adapters, steel posts,
Includes (4) 5”
(127mm) Diameter
Swivel Casters
Cat. No.
MQSEC53VE
MQSEC55VE
MQSEC56VE
Standard Units consist of top
and bottom wire shelves,
wire enclosures, and doors.
Casters are included with
mobile units. Intermediate
shelves are sold separately.
List Price
Each
1666.00
1996.00
2138.50
Ergonomic–
1/4 turn door handle
21
Page 24
Maximizes Storage Capacity: qwikTRAK can increase the storage
capacity of a given area by 30% to 40%. The system allows more storage
units to fit in a defined space. A movable, open aisle allows full access
to each entire shelving unit thus eliminating hard to reach or “dead”
spaces.
Accessible and Ergonomic: The low profile and sloped sides of the
guiding track, combined with the easy-to-move mobile units, provide
safe and easy access to all stored products. Mobile units roll easily along
the track, even when moving heavy loads.
Uniquely Interchangeable: Mix and match MetroMax i™ and Q shelves
MetroMax iQ™ qwikTRAK 11.15
and posts based on the application. Corrosion proof MetroMax i™ offers
solid shelf option and better chemical resistance. Corrosion resistant
MetroMax Q steel posts can improve the overall rigidity of the qwikTRAK
Floor tracks compensate for rough or choppy floors and provide a
smooth, level surface to guide the mobile units in a straight line.
MetroMax i™ mobile units can hold up to 1,200 lbs. (544kg) per unit.
MetroMax Q mobile units can hold up to 2,000 lbs. (544kg) per unit.
system in higher weight bearing applications.
Stationary End Unit Kit – Order one per qwikTRAK system.
• Kit includes the hardware and components needed to connect track sets
to two stationary end units. 74" (1880mm) posts included. Shelves are
ordered separately.
Approx.
Pkd. Wt.
(lbs.) (kg)
25.0 11.4
i
End Unit Kit
Cat. No.
List Price
Each
BTEX3 632.00
Approx.
Pkd. Wt.
(lbs.) (kg)
42.0 19.1
Q
End Unit Kit
Cat. No.
BTEQ3
List Price
Each
516.00
Stationary Intermediate Unit Kit –
Required when the desired length of track exceeds 21' (6405mm).
• A stationary intermediate kit may be used at the discretion of the end user
when track lengths are less than 21' (6405mm) to increase the overall
rigidity of the system. Kit includes the hardware and components needed
to connect track sets to one stationary intermediate unit. 74" (1880mm)
posts included. Shelves are ordered separately.
Configuration Guidelines
1. All end, intermediate, and mobile units must be 18" (457mm) or wider.
2. qwikTRAK is available with 74" posts (1880mm) as standard. Requests for TALLER
posts must be reviewed by Metro Engineering. For applications requiring posts
SHORTER than 74" (1880mm), contact your Metro representative.
3. Under normal conditions, aisle width of 30"-36" (760-914mm) is recommended.
The storage of very large objects within the system, however, may require an aisle
width larger than 36" (914mm).
4. A stationary intermediate unit is required when the track length exceeds 21 feet
(6405mm). A stationary intermediate unit may be used at the discretion of the
user when the track lengths are less than 21 ft. (6405mm).
5. It i s recommended that the tracks are installed a minimum of 1-3/4" (45mm)
from the wall.
6. Actual width of a qwikTRAK system is the Nominal Shelf length + 3-1/2" (89mm).
7. Actual height of a mobile qwikTRAK unit is: Nominal post height + 4.5" (115mm)
8. Actual length of a qwikTRAK system is: Nominal track length + the nominal width
of each end unit + 3" (76mm).
9. Weight capacities for standard qwikTRAK: MetroMax Q systems are designed to
hold up to 2,000 lbs. (907kg) per shelving unit. MetroMax i™ stationary units can
hold up to 2,000 lbs. (907kg); MetroMax i mobile units can hold up to 1,200 lbs.
(544kg) per unit.
Approx.
Pkd. Wt.
(lbs.) (kg)
15.7 7.1
i
Int. Unit Kit
Cat. No.
BTAX3
Approx.
List Price
Each
Pkd. Wt.
(lbs.) (kg)
442.00 24.2 11.0
Q
Int. Unit Kit
Cat. No.
BTAQ3
List Price
Each
384.00
Mobile Unit Kit – Order one per mobile unit.
• Kit includes posts, qwikTRAK casters, and bumpers. Shelves
are sold separately.
Approx.
Pkd. Wt.
(lbs.) (kg)
18.5 8.4
i
Int. Unit Kit
Cat. No.
BTMX3
Approx.
List Price
Each
Pkd. Wt.
(lbs.) (kg)
665.00 27 12.3
Q
Int. Unit Kit
Cat. No.
BTMQ3
List Price
Each
607.00
Track Sets – One track set is required between stationary units.
• Includes necessary sections of track for assembling track runs of 6' to 21' (1830-6405mm).
Approx.
Length
(feet) (mm)
2.5 763 4.0 1.8
6 1830 9.0 4.1
7 2135 10.0 4.5
8 2440 11.0 5.0
9 2745 13.0 5.9
10 3050 14.0 6.4
11 3355 15.0 6.8
12 3660 17.0 7.7
22
13 3965 18.0 8.2
Note: BTS2.5NA includes a joining kit to connect the tracks to longer track sections.
Pkd. Wt.
(lbs.) (kg) Cat. No.
BTS2.5NA
BTS6NA
BTS7NA
BTS8NA
BTS9NA
BTS10NA
BTS11NA
BTS12NA
BTS13NA
List Price
Each
360.00 14 4267 19.0 8.6
367.00 15 4572 21.0 9.5
418.00 16 4877 22.0 10.0
617.00 17 5182 23.0 10.5
670.00 18 5486 25.0 11.4
725.00 19 5791 26.0 11.8
780.00 20 6096 27.0 12.3
834.00 21 6400 29.0 13.2
888.00
Length
(feet) (mm)
Approx.
Pkd. Wt.
(lbs.) (kg) Cat. No.
FRONT VIEW
BTS14NA
BTS15NA
BTS16NA
BTS17NA
BTS18NA
BTS19NA
BTS20NA
BTS21NA
List Price
Each
940.00
1141.00
1194.00
1250.00
1304.00
1357.00
1410.00
1462.00
OVERHEAD VIEW
A = Stationary End Units
B = Mobile Units
C = qwikTRAK
D = Stationary Intermediate Unit
E = Active Aisle
Page 25
Double Deep qwikTRAK 11.15
• Greater Storage Capacity: Shelving units are joined end-to-end
to create a larger storage system with greater capacity.
• Double Deep Mobile Units can easily be moved to allow efficient
access to stored contents
MetroMax i™ double deep mobile units can hold up to 1,800 lbs. (818kg) per unit
evenly distributed. MetroMax Q mobile units can hold up to 3,000 lbs. (544kg) per
unit evenly distributed.
Stationary End Unit Kit – Order one kit per Double-Deep system.
• Kit includes the hardware and components needed to connect track sets
to two Double-Deep stationary end units. 74" (1880mm) posts included.
Shelves are ordered separately.
Approx.
Pkd. Wt.
(lbs.) (kg)
42.3 19.2
i
End Unit Kit
Cat. No.
LBTEX3
Approx.
List Price
Each
1,297.00 76.3 34.7
Pkd. Wt.
(lbs.) (kg)
Q
End Unit Kit
Cat. No.
LBTEQ3
List Price
Each
1,065.00
Stationary Intermediate Unit Kit –
Required when the desired length of track exceeds 21' (6405mm).
• A stationary intermediate kit may be used at the discretion of the end user
when track lengths are less than 21' (6405mm) to increase the overall
rigidity of the system. Kit includes the hardware and components needed
to connect track sets to one Double-Deep stationary intermediate unit. 74"
(1880mm) posts included. Shelves are ordered separately.
Double-up
on space.
Double Deep qwikTRAK 11.15
OVERHEAD VIEW
FRONT VIEW
A = Stationary End Units
B = Mobile Units
C = qwikTRAK
D = Stationary Intermediate
Unit
E = Active Aisle
Approx.
Pkd. Wt.
(lbs.) (kg)
24.3 11.0
i
Int. Unit Kit
Cat. No.
LBTAX3
Approx.
List Price
Each
917.00 41.3 18.8
Pkd. Wt.
(lbs.) (kg)
Q
Int. Unit Kit
Cat. No.
LBTAQ3
List Price
Each
801.00
Mobile Unit Kit – Order one kit per Double-Deep mobile unit.
• Kit includes posts, qwikTRAK casters, center caster channel assembly,
bumpers, tie-bar brackets and other hardware to assemble a Double-Deep
unit. Shelves are sold separately.
Approx.
Pkd. Wt.
(lbs.) (kg)
35.5 16.1
37.5 17.0
i
Mobile Unit Kit
Cat. No.
LBTM18X3
-
LBTM24X3
Approx.
List Price
Each
1,379.00 57.1 26.0
1,431.00 59.1 26.9
Pkd. Wt.
(lbs.) (kg)
58.1 26.4
Q
Mobile Unit Kit
Cat. No.
LBTM18Q3
LBTM21Q3
LBTM24Q3
List Price
Each
1,263.00
1,289.00
1,315.00
Track Sets – One track set is required between stationary units.
• Includes tracks and hardware needed to assemble Double-Deep
qwikTRAK Systems of 6' to 21' (1830-6405mm).
Approx.
Length
(feet) (mm)
2.5 763 6.0 2.7
6 1830 13.5 6.1
7 2135 15.0 6.8
8 2440 16.5 7.5
9 2745 19.5 8.9
10 3050 21.0 9.5
11 3355 22.5 10.2
12 3660 25.5 11.6
13 3965 27.0 12.3
Note: LBTS2.5NA includes a joining kit to connect the tracks to longer track sections.
Pkd. Wt.
(lbs.) (kg) Cat. No.
LBTS2.5NA
LBTS6NA
LBTS7NA
LBTS8NA
LBTS9NA
LBTS10NA
LBTS11NA
LBTS12NA
LBTS13NA
List Price
Each
540.00 14 4270 28.5 13.0
550.50 15 4575 31.5 14.3
627.00 16 4880 33.0 15.0
925.50 17 5185 34.5 15.7
1005.00 18 5490 37.5 17.0
1087.50 19 5795 39.0 17.7
1170.00 20 6100 40.5 18.4
1251.00 21 6405 43.5 19.8
1332.00
Length
(feet) (mm)
Configuration Guidelines
1. All end, intermediate, and mobile units must be 18" (457mm) or wider.
2. Each st ationa ry end and inte rmedia te unit must ha ve a m inimum of fou r
shelves.
3. Double Deep qwikTRAK is available with 74" posts (1880mm) as standard. Requests
for TALLER posts must be reviewed by Metro Engineering. For applications requiring
posts SHORTER than 74" (1880mm), contact your Metro representative.
4. Under normal conditions, aisle width of 30"-36" (760-914mm) is recommended.
The storage of very large objects within the system, however, may require an aisle
width larger than 36" (914mm).
5. Two stationary intermed iate un its con nected end to end are required when
the track length exceeds 21 feet (6405mm). Stationary intermediate units may
be used at the discretion of the user when the track lengths are less than 21 ft.
(6405mm).
6. It i s recommended that the tracks are installed a mini mum of 1-3/4" (45mm)
from the wall.
7. Ma xim um a llo wab le s hel f le ngt h for use wit h a d oub le d eep sys tem
is 60" (1524mm).
8. The maximum width of a double deep configuration is 10'6" (3200mm). (i.e., two
systems, each having 60" (1524mm) long shelves, plus 6" (150mm) for qwikTRAK
components.
9. Actual width of a double deep configuration is the Nominal Shelf Length + 3-1/2"
(89mm).
10. Weight capacities: Double Deep Mobile Units — MetroMax Q: 3,000 lbs. (1364kg)
evenly distributed. MetroMax: 1,800 lbs. (818kg) evenly distributed.
11. S tationary E nd and Intermediate Units — Each end and inte rmediate do uble
deep unit consists of two independent stationary shelving units positioned side
by side. Each shelving unit has a maximum weight capacity of 2000 lbs. (904kg)
Approx.
Pkd. Wt.
(lbs.) (kg) Cat. No.
evenly distributed.
LBTS14NA
LBTS15NA
LBTS16NA
LBTS17NA
LBTS18NA
LBTS19NA
LBTS20NA
LBTS21NA
List Price
Each
1410.00
1711.50
1791.00
1875.00
1956.00
2035.00
2115.00
2193.00
23
Page 26
Maximizes Storage Capacity: Top-Track can increase the storage
C
E
D D DA B
C
E
D D D A
BA D D D E
C
AD D D E
C
C C
capacity of a given area by 30% to 40%. Put more storage units into a
defined space. A movable, open aisle allows full access to each entire
shelving unit–eliminating hard to reach or “dead” spaces.
Easy Access: The overhead track system guides the mobile units and
opens an access aisle between any two units. The track is above the
storage units enabling easy access.
Clean Design: Guide tracks are installed overhead enabling easy
cleaning of floors. MetroMax i™ and MetroMax Q shelves feature
removable polymer shelf mats and built-in Microban antimicrobial
product protection to promote easier routine cleaning.
MetroMax iQ™ Top-Track 9.29
Uniquely Interchangeable: Mix and match MetroMax i™ and Q shelves
and posts based on the application. Corrosion proof MetroMax i™ offers
The system compensates for uneven floor surfaces. Floor
should be smooth and free from large cracks or raised obstacles.
Maximum load capacity for mobile units is 900 lbs. (410kg).
solid shelf option and better chemical resistance. Corrosion resistant
MetroMax Q steel posts can improve the overall rigidity of the Top-Track
system in higher weight bearing applications.
Stationary End Unit Kit – Order one per Top-Track system.
• Includes hardware and components to connect track sets to two stationary
end units. 86" (2185mm) posts included. Shelves are ordered separately.
Fits Shelf Width
(in) (mm)
18 457
21 530
24 610
i
End Unit Kit
Cat. No.
MXTTE18
-
MXTTE24
List Price
Each
844.00
-
865.00
Q
End Unit Kit
Cat. No.
MQTTE18
MQTTE21
MQTTE24
List Price
Each
700.00
711.00
722.00
Stationary Intermediate Unit Kit –
Required when the desired length of track exceeds 21' (6405mm).
• A stationary intermediate kit may be used at the discretion of the end user
when track lengths are less than 21' (6405mm) to increase the overall
rigidity of the system. Kit includes the hardware and components needed
to connect track sets to one stationary intermediate unit. 86" (2185mm)
posts included. Shelves are ordered separately.
Fits Shelf Width
(in) (mm)
18 457
21 530
24 610
i
Int. Unit Kit
Cat. No.
MXTTA18
-
MXTTA24
List Price
Each
500.00
-
515.00
Q
Int. Unit Kit
Cat. No.
MQTTA18
MQTTA21
MQTTA24
List Price
Each
428.00
435.00
443.00
Configuration Guidelines
1. Stand ard Top-Tra ck models inclu de 86" (2185mm ) st ationary po sts and 74"
(1880mm) stem caster mobile posts. If a taller system is required, consult Metro
Engineering.
2. Mobile, stationary end, and intermediate units must have a minimum of 4 shelves.
3. Stat ionary Inte rmediat e U nit is require d w hen the track leng th exceeds 21 '
(6405m m). Intermedi ate k its include specia l su pport rails that attach to the
overhead tracks on both sides of the intermediate unit. A stationary intermediate
unit may be used at the discretion of the user when track lengths are less than 21'
(6405mm) for the purpose of adding greater stability to the overall system.
4. Mobile Units: If 18" (457mm) wide mobile units are planned, the maximum allowable
size shelf is 60" (1524mm) long. If 18" (457mm) wide by 60" (1524mm) long mobile
units are planne d, a maximum of five 18" ( 457mm) mobile units are allow able
between two stationary units. 18" (457mm), 21" (530mm) and 24" (610mm) wide
mobile units can be intermixed in a given system. The standard system requires 74"
(1880mm) posts on the mobile units. Recommended maximum load rating for a
mobile unit is 900 lbs. (410kg).
5. Under normal conditions, an aisle of 30" to 36" (760-914mm) is recommended. The
storage of very large objects within the system, however, may require an aisle width
larger than 36" (914mm).
6. To accommodate bumpers, the actual size of a mobile unit is 2.5" (63.5mm) wider
than the shelf width shown. For example, an 1 8"(457mm) wide unit is actual ly
20.5" (521mm).
7. To calculate the overall length of a MetroMax or MetroMax Q Top-Track System,
add the following: Nominal track length + Nominal widths of each end unit + 2"
(51mm).
FRONT VIEW
OVERHEAD VIEW
Mobile Unit Kit – Order one per mobile unit.
• Kit includes posts, rigid casters, caster channels, bumpers,
and roller assemblies. Shelves are sold separately.
Fits Shelf Width
(in) (mm)
18 457
21 530
24 610
i
w/ Plated Casters
Cat. No.
MXTTM18C
-
MXTTM24C
List Price
Each
434.00
-
456.00
i
w/ Stainless Casters
Cat. No.
MXTTM18S
-
MXTTM24S
List Price
Each
710.00
-
730.00
Q
w/ Plated Casters
Cat. No.
MQTTM18C
MQTTM21C
MQTTM24C
List Price
376.00
387.00
398.00
Track Sets – One track set is required between stationary units
• Includes necessary sections of track for assembling track runs of 6' to 21' (1830-6405mm).
Length
(feet) (mm)
2-1/2 762 15 6.8
6 1828 40.5 18.2
7 2135 47.5 21.3
8 2440 56 25.2
9 2743 62.5 28.1
10 3048 69.5 31.2
24
11 3353 76.5 34.4
12 3657 83.5 37.5
13 3962 92 41.4
Note: TTS2.5NA includes a joining kit to connect the tracks to longer track sections.
Approx.
Pkd. Wt.
(lbs.) (kg) Cat. No.
TTS2.5NA
TTS6NA
TTS7NA
TTS8NA
TTS9NA
TTS10NA
TTS11NA
TTS12NA
TTS13NA
Approx.
List Price
Each
Length
(feet) (mm)
Pkd. Wt.
(lbs.) (kg) Cat. No.
372.00 14 4267 98 44.1
399.00 15 4572 106.5 47.9
453.00 16 4877 113.5 51
669.00 17 5182 121 54.4
726.00 18 5486 128 51.6
785.00 19 5791 135 60.7
846.00 20 6096 142 63.9
903.00 21 6400 149 67
961.00
Each
Q
w/ Stainless Casters
Cat. No.
MQTTM18S
MQTTM21S
MQTTM24S
TTS14NA
TTS15NA
TTS16NA
TTS17NA
TTS18NA
TTS19NA
TTS20NA
TTS21NA
List Price
Each
652.00
662.00
672.00
List Price
Each
1,018.00
1,234.00
1,292.00
1,354.00
1,412.00
1,467.00
1,526.00
1,582.00
A = Stationary End Units
B = Stationary Intermediate
Unit (Optional)
C = Track Set
D = Mobile Units
E = Open Aisle
Page 27
Compare.
See how MetroMax iQ™ Storage System
stacks up to other shelving styles available.
Easily Cleanable
Quick to Adjust
Corrosion Protection in
wet / moist environments
Abrasion Resistant
Strength
Smooth Surfaces
Chemical Resistance to common
N/A
cleaners / sanitizers
Storage Capacity
Antimicrobial Protection
Accessories
Organization
Mobility
High Temp. Cart Wash
Autoclave Sterilization
Excellent
Above Average
Average
Below Average
Not Recommended
Not Applicable
Stainless Steel
Solid/Wire
N/A
MetroMax i™
Polymer
MetroMax Q™
Polymer &
Epoxy Coated Steel
Super Adjustable™
Wire Shelving
Epoxy Coated/Plated
N/A
Standard
Wire Shelving
Epoxy Coated/Plated
N/A
25
Page 28
Uniquely
Integrated :-)
www.metro.com/iQ
MetroMax iQ™ Shelving System is supported with interactive online tools to help you
configure a storage solution that is right for you. Visit www.metro.com/iQ where videos
provide an introduction to the system. View MetroMax iQ™ configurations with tips
that point out the best uses of the system. Then, use the online configurator to help you
build the exact shelving system you desire. Finally, find all the literature and support
materials in one convenient location. MetroMax iQ™ is uniquely integrated.
L04-184
Corporate Headquarters
651 North Washington Street
Wilkes-Barre, PA 18705
Phone: 570.825.2741
Fax: 570.825.2852
1 - 8 0 0 - 4 3 3 - 2 2 3 2
U.S. and Canada Product Information
Intermetro Industries B.V.
Heerbaan 242
4817 NL BREDA
The Netherlands
Tel: +31 76 587 7550
Fax: +31 76 581 1313
inhibits the growth of stain and odor causing bacteria.
Microban does not protect users from food borne illness.
Normal cleaning practices should be maintained. Microban
is a registered trademark of Microban Products Company
© 2009 InterMetro Industries Corporation, Wilkes-Barre, PA 18705
The Emerson logo is a trademark and a service mark of Emerson Electric Company.
Asia/Pacific
Metro International Corporation
100 Cecil Street
#09-01 The Globe
Singapore 069532
Singapore
Phone: .65.6372.1092
Fax: .65.6372.1094
Latin America
Metro International Corporation
16562 83rd Place North
Loxahatchee, FL 33470
Phone: 1.561.333.3824
Fax: 1.561.792.6351
Loading...