Page 1
Item# _______________________________________________
Job _________________________________________________
Casters Stem-Type
InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
Copyright © 1993 InterMetro Industries Corporation
11.20
METRO™
STEM CASTERS
• Metro Stem-Type Casters are designed to fit
Super Erecta Shelf®posts to form shelf carts and
other mobile units.
• Stainless Steel, Cart-Washable Casters offer
grease seals and zerk fittings. Can withstand
high-pressure washings.
• Polymer Casters: Innovative polymer stem
casters offer total corrosion resistance and
enhanced durability. For all medium-duty
applications.
• Resilient Rubber Tread: A molded, soft tread
that provides good floor protection along with
quiet operation. Non-marking.
• Polyurethane Tread: Long-wearing: resists
abrasion. Non-marking, shock absorbing.
• Wheel Brakes: Foot-operated. Available on all
caster models.
• Caster Load Ratings: From 125 lbs. to 300 lbs.
(57 to 136kg).
• Donut Bumpers: Furnished standard on all
Metro stem casters.
• Additional Caster Types Available.
Note: SPECIAL WHEELS — V-groove, Conductive, Steel and
Phenolic — are available on request. For additional information,
contact InterMetro Industries Corporation or your InterMetro
representative.
Copyright © 1998 InterMetro Industries Corp.
Standard
5MB Wheel Brake
5M Resilient
Polymer Casters
Stainless Steel, Cart Washable
5MDBGSA 5MDGSA
5PC 5PCB
Page 2
Job____________________________________________
METRO™
STEM CASTERS
Manufactured by: Phone 717-825-2741
InterMetro Industries Corp. FAX 717-825-2852
North Washington Street For Product Information, call 1-800-433-2232
Wilkes-Barre, PA 18705 For Customer Service, call 1-800-992-1776
InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
L02-041
Rev. 9/98 BJ
Printed in U.S.A.
Information and specifications are subject to change
without notice. Please confirm at time of order.
Casters Stem-Type
11.20
DIMENSIONS: Standard Casters — Stem-Type
Approx.
Wheel Dia. Face Load Rating Pkd. Wt.
Cat. No. Type (in.) (mm) (in.) (mm) Wheel Tread (lbs.) (kg) (lbs.) (kg)
4LD Stem/Swivel 4 102
1
/
2
12 Resilient 125 56 11/2.6
5LD Stem/Swivel 5 127
1
/
2
12 Resilient 125 56 2 .9
5M Stem/Swivel 5 127 11/
4
32 Resilient 200 90 21/21.1
5MB Stem/Brake 5 127 11/
4
32 Resilient 200 90 23/41.2
5MR Stem/Rigid 5 127 11/
4
32 Resilient 200 90 31/21.5
5MDA Stem/Swivel 5 127 11/
4
32 High Modulus Donut 250 111 21/21.1
5MDBA Stem/Brake 5 127 11/
4
32 High Modulus Donut 250 111 25/81.17
5MDRA Stem/Rigid 5 127 11/
4
32 High Modulus Donut 250 111 23/81.08
5MP Stem/Swivel 5 127 11/
4
32 Polyurethane 300 135 21/8.94
5MPB Stem/Brake 5 127 11/
4
32 Polyurethane 300 135 21/
4
1
5MPR Stem/Rigid 5 127 11/
4
32 Polyurethane 300 135 2 .9
NOTE 1: Stem casters are shipped with donut bumper at no additional charge.
NOTE 2: Rigid casters are held in position by a connecting channel. When ordering rigid casters, shelf width must be known.
NOTE 3: Load Height for all 5M, 5MD and 5MP casters — 6
3
/32” ±1/16” (155 ± 1.5mm).
NOTE 4: Load Height for 4LD caster — 4
5
/8” ±1/16” (118 ± 1.5mm).
NOTE 5: Load Height for 5LD caster — 5
5
/8” ±1/16” (143 ± 1.5mm).
NOTE 6: Brakes are foot-operated.
DIMENSIONS: Stainless Steel Cart-Washable Casters — Stem-Type
Approx.
Wheel Dia. Face Load Rating Pkd. Wt.
Cat. No. Type (in.) (mm) (in.) (mm) Wheel Tread (lbs.) (kg) (lbs.) (kg)
5MDGSA Swivel 5 127 11/
4
32 High Modulus Donut 150 68 21/21.1
5MDBGSA Brake 5 127 11/
4
32 High Modulus Donut 150 68 25/81.17
5MDRGSA Rigid 5 127 11/
4
32 High Modulus Donut 150 68 23/81.08
5MPGSA Swivel 5 127 11/
4
32 Polyurethane 300 135 21/8.94
5MPBGSA Brake 5 127 11/
4
32 Polyurethane 300 135 21/
4
1
5MPRGSA Rigid 5 127 11/
4
32 Polyurethane 300 135 2 .9
NOTE 1: Stem casters are shipped with donut bumper at no extra charge.
NOTE 2: Rigid casters are held in position by a connecting channel. When ordering rigid casters, shelf width must be known.
NOTE 3: Load Height for all 5MD and 5MP casters — 6
3
/32” ±1/16” (155 ± 1.5mm).
NOTE 4: All casters are grease sealed with zerk fittings in swivel and axle.
NOTE 5: Brakes are foot-operated.
NOTE 6: "D" in model number designates donut wheel made of high-modulus rubber.
DIMENSIONS: Polymer Casters — Stem-Type
Approx.
Wheel Dia. Face Load Rating Pkd. Wt.
Cat. No. Type (in.) (mm) (in.) (mm) Wheel Tread (lbs.) (kg) (lbs.) (kg)
5PC Swivel 5 127 11/
4
32 Polyurethane 300 135 2 .9
5PCB Brake 5 127 11/
4
32 Polyurethane 300 135 2 .9
5PCR Rigid 5 127 11/
4
32 Polyurethane 300 135 2 .9
NOTE 1: Optional thread guards (blue) may be ordered by adding “-TG” to the desired model number (eg. 5PC-TG, 5PCB-TG, 5PCR-TG)
NOTE 2: Stem casters are shipped with donut bumpers at no extra charge.
NOTE 3: Rigid casters are held in place by a connecting channel. When ordering, shelf depth must be provided.
Loading...