Metro 30N-1C User Manual

Item # ______________________________________________

Item # ______________________________________________

Job ________________________________________________

Job ________________________________________________

WIRE SHELVING ACCESSORIES

Shelf Dividers for Super Erecta and Super Adjustable Shelves

Keep shelf contents orderly with these 8" (203mm) high, pressure-fit dividers. Unique design
allows them to attach to the top or underside of shelves.

Model No. Approx.
Model No. Model No. Model No. Model No. Metroseal 3 Model No. Model No. Shelf Width Pkd. Wt.
Chrome Black White Smoked Glass with Microban® Stainless Designer Colors* (in.) (mm) (lbs.) (kg)

DD14C DD14BL DD14W DD14-DSG DD14K3 DD14S DD14-D 14 355 1.8 0.8
DD18C DD18BL DD18W DD18-DSG DD18K3 DD18S DD18-D 18 457 2.25 1.0
DD21C DD21BL DD21W DD21-DSG DD21K3 DD21S DD21-D 21 530 2.5 1.1
DD24C DD24BL DD24W DD24-DSG DD24K3 DD24S DD24-D 24 610 2.75 1.3
DD30C DD30BL DD30W DD30-DSG DD30S 30 760 3.25 1.5
DD36C DD36BL DD36W DD36-DSG DD36S 36 914 3.75 1.7

Dividers cannot be stacked.
For OTR applications, additional clamping may be required to keep dividers in place. Consult Metro engineering.

Shelf Ledges — Side and Back

For stationary or mobile installations, ledges prevent items from protruding or falling from
shelves.

1" (25mm) High Ledges

Model No. Model No. Model No. Model No. Model No. Model No. Length Approx. Pkd. Wt.
Chrome Black White Smoked Glass Stainless Designer Colors* (in.) (mm) (lbs.) (kg)

L14N-1C L14N-1BL L14N-1W L14N-1-DSG L14N-1S L14N-1-D 14 355 0.58 0.25
L18N-1C L18N-1BL L18N-1W L18N-1-DSG L18N-1S L18N-1-D 18 457 0.75 0.33
L21N-1C L21N-1BL L21N-1W L21N-1-DSG L21N-1S L21N-1-D 21 530 0.75 0.33
L24N-1C L24N-1BL L24N-1W L24N-1-DSG L24N-1S L24N-1-D 24 610 1.0 0.45
L30N-1C L30N-1BL L30N-1W L30N-1-DSG L30N-1S L30N-1-D 30 760 2.0 0.9
L36N-1C L36N-1BL L36N-1W L36N-1-DSG L36N-1S L36N-1-D 36 914 2.5 1.13
L42N-1C L42N-1BL L42N-1W L42N-1-DSG L42N-1S L42N-1-D 42 1066 2.75 1.25
L48N-1C L48N-1BL L48N-1W L48N-1-DSG L48N-1S L48N-1-D 48 1219 3.5 1.58
L54N-1C L54N-1BL L54N-1W L54N-1-DSG L54N-1S L54N-1-D 54 1370 4.4 1.65
L60N-1C L60N-1BL L60N-1W L60N-1-DSG L60N-1S L60N-1-D 60 1524 3.75 1.68
L72N-1C L72N-1BL L72N-1W L72N-1-DSG L72N-1S L72N-1-D 72 1828 4.0 1.81

Note: Actual length is approximately 1" (25mm) shorter than nominal shelf length/width.
1" (25mm) ledges are not stackable.
Ledges may also be used on the interior of a shelf (lengthwise) by attaching directly above a snake truss. Interior snake trusses are found
on shelf widths of 21" (530mm) and larger.

4" (100mm) High Stackable Ledges

Ledges may be stacked to form an 8" (203mm) or higher barrier.

Model No. Model No. Shelf Approx.
Model No. Model No. Model No. Model No. Metroseal 3 Model No. Designer Width Pkd. Wt.
Chrome Black White Smoked Glass with Microban® Stainless Colors* (in.) (mm) (lbs.) (kg)

L14N-4C L14N-4BL L14N-4W L14N-4-DSG L14N-4K3 L14N-4S L14N-4-D 14 355 0.8 0.3
L18N-4C L18N-4BL L18N-4W L18N-4-DSG L18N-4K3 L18N-4S L18N-4-D 18 457 1.5 0.6
L21N-4C L21N-4BL L21N-4W L21N-4-DSG L21N-4K3 L21N-4S L21N-4-D 21 530 1.7 0.7
L24N-4C L24N-4BL L24N-4W L24N-4-DSG L24N-4K3 L24N-4S L24N-4-D 24 610 2.0 0.9
L30N-4C L30N-4BL L30N-4W L30N-4-DSG L30N-4K3 L30N-4S L30N-4-D 30 760 2.2 1.0
L36N-4C L36N-4BL L36N-4W L36N-4-DSG L36N-4K3 L36N-4S L36N-4-D 36 914 2.7 1.2
L42N-4C L42N-4BL L42N-4W L42N-4-DSG L42N-4K3 L42N-4S L42N-4-D 42 1066 3.2 1.4
L48N-4C L48N-4BL L48N-4W L48N-4-DSG L48N-4K3 L48N-4S L48N-4-D 48 1219 3.7 1.6
L54N-4C L54N-4BL L54N-4W L54N-4-DSG L54N-4K3 L54N-4S L54N-4-D 54 1370 3.8 1.7
L60N-4C L60N-4BL L60N-4W L60N-4-DSG L60N-4K3 L60N-4S L60N-4-D 60 1524 4.0 1.8
L72N-4C L72N-4BL L72N-4W L72N-4-DSG L72N-4K3 L72N-4S L72N-4-D 72 1828 5.0 2.2

Note: Actual length is approximately 1" (25mm) shorter than nominal shelf length/width.
Ledges may also be used on the interior of a shelf (lengthwise) by attaching directly above a snake truss. Interior snake trusses are found
on shelf widths of 21" (530mm) and larger.

Designer Shelf Colors

*To order a Designer Color, add the appropriate color suffix to the desired catalog numbers above

(example: 18"x36" [457x914mm] Hunter Green Shelf = 1836N-DHG).

BM — Black Matte SH — Silver Hammertone HG — Hunter Green
F — Flame CH — Copper Hammertone

Shelf Divider for
Super Erecta Shelves

1" (25mm) Ledge

4" (102mm) Ledge

Wire Shelving Accessories

10.04

9.01

*MICROBAN® and the MICROBAN® symbol are registered trademarks of the Microban Products Company, Huntersville, NC.

InterMetro Industries Corporation

North Washington Street
Wilkes-Barre, PA 18705
www.metro.com

WIRE SHELVING ACCESSORIES

Snap-On Dividers for Drop Mat Shelves

Organize your shelves with these 8" (203mm) high, easy to snap-in-place dividers.

Fits Approx.
Model No. Model No. Model No. Model No. Model No. Shelf Width Pkd. Wt.
Chrome Black White Smoked Glass Designer Colors* (in.) (mm) (lbs.) (kg)

HD18C HD18B HD18W HD18-DSG HD18-D 18 457 2.5 1.1
HD24C HD24B D24W HD24-DSG HD24-D 24 614 3.5 1.6

Super Erecta Slide System (for tote boxes)

Using Super Erecta or Super Adjustable Super Erecta wire units, tote boxes, and these
innovative slides, you have the flexibility to create a custom configuration that can be
positioned quickly on new or existing units without the use of tools.

Outside Slide Dimensions Approx.
Height/Width/Length For Shelf Width Pkd. Wt.
Model No. (in.) (mm) (in.) (mm) Adaptable Boxes (lbs.) (kg)

SS2NC 101/4x203/8x215/8 256x510x537 24 610 TB/MTB93030W, 43/4 2.1
TB/MTB93060W,
TB/MTB93080W
SS3NC 101/4x14x171/8 256x355x430 21 530 TB/MTB92035W, 31/2 1.5
TB/MTB92060W,
TB/MTB92080W
SS4NC 101/4x251/8x171/8 256x630x430 21 530 TB/MTB93030W,* 4 1.8
TB/MTB93060W,*
TB/MTB93080W*

*Fits SS4NC with box turned sideways.

Note:

SS2NC may also be used on 30” (760mm) and 36" (910mm) width shelves.
Load ratings: 25 lbs. (11.3kg) max per slide level, not to exceed 50 lbs. (22.6 kg) per slide system.
These slides do NOT work with 12"x20" (305x508mm) steam table pans or 18"x26" (457x660mm) bun pans.

One-Piece Slides

One-piece solid slide attaches easily to shelf with support brackets.

For Approx.
Shelf Width Pkd. Wt.
Model No. (in.) (mm) (lbs.) (kg)

BSD2224NB 24 610 51/2 2.47

Not adaptable to 24" (610mm) long shelf.
Can use (2) on a 24"x48" (610x1219mm) shelf.
Can use (3) on a 24"x60" (610x1524mm) shelf.

Snap-On Divider

Super Erecta Slide System in place
on shelf (Tote box sold separately)

One-Piece Slide

Adjustable Undershelf Slides

These slides can be spaced to fit any width container or tote box.

Approx.
Model No. For Shelf Width Pkd. Wt.
(pair) (in.) (mm) (lbs.) (kg)

US18NA 18 457 1 0.4
US21NA 21 530 1 0.4
US24NA 24 610 1 0.4

*Not adaptable to 24" (610mm) long shelf.

Tray Slides

Free up shelves for more efficient use of space. Adaptable slides work with TB93000
and MTB93000 series tote boxes, 12"x20" (305x508mm) steam table pans, or 18"x26"
(457x660mm) bun pans. Available in chrome and Metroseal 3 finishes. 223/4" H (578mm).

On Center
Model No. Overall Slide Slide Fits Approx.
Model No. Metroseal 3 Width Depth Profile Spacing Shelf Width Weight/Pair
Chrome with Microban® (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)

15SNC 15SNK3 145/8 371 21/4 56 11/2 37 11/2 37 18 457 91/2 4.3
20SNC 20SNK3 20 508 21/4 56 11/2 37 11/2 37 24 610 11 5.0

Load rating: 25 lbs. (11.3kg) max per slide level, not to exceed 50 lbs. (22.6kg) per slide system.
20SNC / K3 will fit 30" (760mm) and 36" (910mm) shelves.

Shelf Lengths Tray Slides per Level

24" (610mm) through 42" (1066mm) 1
48" (1219mm) 1 or 2
60" (1524mm) 2
72" (1829mm) 2 or 3

*MICROBAN® and the MICROBAN® symbol are registered trademarks of the Microban Products Company, Huntersville, NC.

Adjustable Undershelf Slide

Tray Slides

WIRE SHELVING ACCESSORIES

Enclosure Panels

An efficient way to enclose space for stationary or mobile applications.

• Can be used with Super Erecta® and Super Adjustable wire shelving, and

Super Erecta solid shelving.

• Appropriate mounting hardware supplied with each panel.

Enclosure Panel

Enclosure Panels for Super Erecta Wire and
Solid, Super Adjustable and MetroMax Q Shelving Units

. . For Nominal
Model No. Model No. Width/Height Post Height Grid Opening Weight
Chrome Stainless (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)

EP35C EP35S 123/8 x 503/4 313 x 1289 54 1370 27/8 x 35/8 73 x 92 3 1.4
EP36C EP36S 123/8 x 593/4 313 x 1518 63 1600 27/8 x 35/8 73 x 92 4 1.8
EP37C — 123/8 x 701/2 313 x 1791 74 1880 27/8 x 35/8 73 x 92 6 2.7
EP55C EP55S 183/8 x 503/4 464 x 1289 54 1370 33/8 x 35/8 86 x 92 5 2.3
EP56C EP56S 183/8 x 593/4 464 x 1518 63 1600 33/8 x 35/8 86 x 92 6 2.7
EP57C — 183/8 x 701/2 464 x 1791 74 1880 33/8 x 35/8 86 x 92 7 3.2

All panels are 7/8" (22mm) thick.

Panels Required for Super Erecta Wire and Solid and Super Adjustable Shelving Units

Ends — Panels required for each end, as follows:

Nominal 18" (457mm) 21" (530mm) 24" (610mm) 30" (760mm) 36" (914mm)
Post Height Nominal Nominal Nominal Nominal Nominal
(in.) (mm) Shelf Width Shelf Width Shelf Width Shelf Width Shelf Width

54 1370 EP35 EP35 EP55 (2) EP35 (1) EP35, (1) EP55
63 1600 EP36 EP36 EP56 (2) EP36 (1) EP36, (1) EP56
74 1880 EP37 EP37 EP57 (2) EP37 (1) EP37, (1) EP57

Backs — Require multiple panels as follows:

WIRE SHELVES

Nominal 30" (760mm) 36" (914mm) 42" (1060mm) 48" (1219mm) 54" (1370mm) 60" (1524mm) 72" (1825mm)
Post Height Nominal Nominal Nominal Nominal Nominal Nominal Nominal
(in.) (mm) Shelf Length Shelf Length Shelf Length Shelf Length Shelf Length Shelf Length Shelf Length

54 1370 (2) EP35 (1) EP35, (1) EP55 (2) EP55 (2) EP35, (1) EP55 (1) EP35, (2) EP55 (3) EP55 (1) EP35, (3) EP55
63 1600 (2) EP36 (1) EP36, (1) EP56 (2) EP56 (2) EP36, (1) EP56 (1) EP36, (2) EP56 (3) EP56 (1) EP36, (3) EP56
74 1880 (2) EP37 (1) EP37, (1) EP57 (2) EP57 (2) EP37, (1) EP57 (1) EP37, (2) EP57 (3) EP57 (1) EP37, (3) EP57

SOLID SHELVES

Nominal 30" (760mm) 36" (914mm) 42" (1060mm) 48" (1219mm) 54" (1370mm) 60" (1524mm) 72" (1825mm)
Post Height Nominal Nominal Nominal Nominal Nominal Nominal Nominal
(in.) (mm) Shelf Length Shelf Length Shelf Length Shelf Length Shelf Length Shelf Length Shelf Length

54 1370 (1) EP55 (2) EP35 (1) EP35, (1) EP55 (2) EP55 — (1) EP35, (2) EP55 —
63 1600 (1) EP56 (2) EP36 (1) EP36, (1) EP56 (2) EP56 — (1) EP36, (2) EP56 —
74 1880 (1) EP57 (2) EP37 (2) EP37, (1) EP57 (2) EP57 — (1) EP37, (2) EP57 —

Note: Units with a solid shelf in the top position require the use of a three-sided snake frame directly below it.

Replacement
Mounting Kit
for Enclosure Panel

Model No. 9970EPZ

Replacement Clamps

Model No. 9970Z
Bag of 8 clamp
assemblies.
(Available by the bag only)

Mounting Kit for Enclosure Panel

Job ________________________________________________

Job ________________________________________________

10.04

WIRE SHELVING ACCESSORIES

Rods

Form side and back enclosures for a shelving unit. Can also serve as
uniform dividers within unit by passing through shelves from top to
bottom. Recommended spacing: every 6" (150mm) to 12" (305mm),
depending upon shelf contents.

Min. Post Approx.
Model No. Model No. Height Rod Length Pkd. Wt.
Chrome Stainless (in.) (in) (mm) (lbs.) (kg)

R52C R52S 54 52 1320 1 0.5
R61C R61S 63 61 1549 1 0.5
R72C R72S 74 72 1830 11/4 0.6
R84C R84S 86 84 2135 11/2 0.7

Tabs

Rods are shipped with 4 tabs per rod.
Additional Tabs — Bag of 12 Model No. 9084Z

Three-Sided Double Snake Frames

Provide additional support or access to floor with these sturdy square
snake frames. Chrome finish.

Approx.
Model No. Width/Length Pkd. Wt.
Chrome (in.) (mm) (lbs.) (kg)

SF31N3C 18x24 457x610 5 2.3
SF32N3C 18x30 457x760 6 2.7
SF33N3C 18x36 457x914 61/2 2.7
SF34N3C 18x42 457x1066 7 3.2
SF35N3C 18x48 457x1219 73/4 3.5
SF36N3C 18x60 457x1524 8 3.6
SF37N3C 18x72 457x1829 9 4.1

SF41N3C 21x24 530x610 5 2.3
SF42N3C 21x30 530x760 6 2.7
SF43N3C 21x36 530x914 61/2 2.7
SF44N3C 21x42 530x1066 7 3.2
SF45N3C 21x48 530x1219 8 3.6
SF46N3C 21x60 530x1524 81/2 3.8
SF47N3C 21x72 530x1829 10 4.5

SF51N3C 24x24 610x610 6 2.7
SF52N3C 24x30 610x760 7 3.2
SF53N3C 24x36 610x914 71/2 3.4
SF54N3C 24x42 610x1066 8 3.6
SF55N3C 24x48 610x1219 9 4.1
SF56N3C 24x60 610x1524 10 4.5
SF57N3C 24x72 610x1829 11 5.0

Rod with
Tab in place

Three-sided Double Snake Frame

All Metro Catalog Sheets are available on our Web Site: www.metro.com

Wire Shelving Accessories

For Product Information:
U.S. and Canada: 1.800.433.2232

InterMetro Industries Corporation

North Washington Street, Wilkes-Barre, PA 18705
Phone: [phone]
Fax: [phone]

Latin America: 1.561.333.3824
Europe: +31.76.587.7550

Printed in U.S.A. Rev. 11/09

Information and specifications are subject to change

without notice. Please confirm at time of order.

Copyright © 2009 InterMetro Industries Corp.

Asia/Pacific: +65.6567.8003
Middle East/Africa: +971.4.811.8286

L02-007A