Page 1
®
®
Item # ______________________________________________
Job ________________________________________________
HD SUPER
™
WORK CENTER WITH OVERHEAD
• Organize Work Areas: HD Super™ Work Center with
overhead structure helps organize work areas, keeping
the work surface neat and clutter-free.
• Saves Steps, Time: Overhead accessories provide a
place for spices, pots and pans and utensils, so they are
always within easy reach.
• Choice of Three Overhead Accessories:
Cantilever Shelf — 12" (305mm) wide wire shelf holds
cooking utensils, ingredients, etc.
Spice Rack — wire rack keeps spices handy.
Hook — attaches to the edge of the other accessories to
hold pots, pans, utensils, etc.
• Arrange Accessories to Suit Needs: The cantilever
shelf and the spice rack can be placed at any level
above the table top, and can be adjusted as needed in
two-inch increments. They can be arranged in any
combination and number along the 88" (2235mm) high
HD Super
• Unique Sanitary Seal Around Back Posts: The 88"
(2235mm) high back posts extend up through holes in
the table, which is embossed at 3/8" (12mm) around the
holes. A seal at the top of the embossment creates a
watertight seal between the posts and the table,
preventing food particles and liquids from entering
the holes.
• Heavy-Duty: HD Super
and built for heavy-duty foodservice and food
processing applications. The 34" (864mm) high work
surface is made of seamless, 14-gauge stainless steel
with a support structure that virtually eliminates any
“drumming” effect.
• Greater Rigidity: Work Centers feature sturdy 1
(38mm) diameter HD Super™ posts and the tapered
sleeves and corners of patented Super Erecta Shelf
construction.
These two features assure a rigid, wobble-free table.
• Easy to Assemble: Units are shipped knocked down
and can be put together in minutes without special tools.
• Several Styles Available: HD Super
overhead structure come in 12 models, all with stainless
steel table tops, but offering a choice of chrome-plated
or stainless steel posts and either a shelf or a threesided frame which can be placed at the desired level
below the top. (NSF requires that shelves be placed at
least 6", 152.4mm above the floor.) Additional shelves
can be ordered from HD Super
™
back posts
™
Work Centers are designed
5
™
Work Centers with
™
stock
/8"
®
Work Center with Overhead
Work Center with Cantilever Shelf
and Spice Rack Accessories
17.26
InterMetro Industries Corporation
®
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
Copyright © 1999 InterMetro Industries Corp.
Page 2
Job ________________________________________________
®
®
17.26
WORK CENTER WITH OVERHEAD
Specifications:
• Top: Seamless 14-gauge T-304 stainless
steel, embossed at
holes for posts, neoprene-sealed at top of
embossment. 14-gauge (.075) channel
support structure is nickel/chrome-plated
after fabrication.
• Bottom Shelf: 16-gauge galvanized or
T-304 stainless steel.
14-gauge available on special order. 30" x
60" (760 x 1525mm) work centers have
24" x 54" (610 x 1370mm) bottom shelves;
30" x 72" (760 x 1825mm) and 30" x 96"
(760 x 2439mm) work centers have 24" x
60" (610 x 1525mm) bottom shelves.
• Bottom Frame: Three-sided tubular
frame available in 16-gauge chromeplated or stainless steel. 30" x 60" (760 x
1525mm) work centers have 24" x 54"
Dimensions
LOAD RATING FOR OVERHEAD: 300 lbs. (136 Kg.) maximum.
LOAD RATING FOR TOP: 3060–625 lbs. (283 kg.); 3072–750 lbs. (340 kg.); 3096–1000 lbs. (454 kg.) equally distributed.
3
/8" (12mm) around
(610 x 1370mm) bottom frames; 30" x 72"
(760 x 1825mm) and 30" x 96" (760 x
2439mm) work centers have 24" x 60"
(610 x 1525mm) bottom frames.
• Posts: Steel posts have an outside
diameter of 1
grooves in 2" (51mm) increments along
entire height.
• Shelf and Spice Rack: Open wire
construction, with tapered corners that fit
over tapered split sleeves on 1
(38mm) diameter HD Super
Available in stainless steel or chromeplated.
• Other Accessories: See data sheet
#17.22 for cutting board holder and
drawers.
5
/8" (38mm), with rolled
5
/8"
™
posts.
Cantilever Shelf
Spice Rack
Hook
Width Length Height Pkd. Wt. Post Shelf Frame
(in) (mnm) (in.) (mm) (in.) (mm) (lbs.) (kg) Material Material Material Cat. No.
30 760 60 1525 881/4 2242 158 72 SS SS — WTC306FS
30 760 72 1825 881/4 2242 182 83 SS SS — WTC307FS
30 760 96 2439 881/4 2242 234 106 SS SS — WTC309FS
30 760 60 1525 881/16 2237 160 73 Chrome Galvanized — WTC306FC
30 760 72 1825 881/16 2237 184 83 Chrome Galvanized — WTC307FC
30 760 96 2439 881/16 2237 236 107 Chrome Galvanized — WTC309FC
30 760 60 1525 881/4 2242 137 62 SS — SS WTC306US
30 760 72 1825 881/4 2242 160 73 SS — SS WTC307US
30 760 96 2439 881/42242 212 96 SS — SS WTC309US
Overall Approx. Bottom Bottom
Accessories
Spice Rack
Fits Units (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg) Chrome-Plated Stainless
60" (1525mm) long 115/16 49.2 43/8 111 519/16 1310 7.7 3.5 654SRC 654SRS
72" (1825mm) long &
96" (2439mm) long 115/16 49.2 43/8 111 579/16 1462 8.3 3.75 660SRC 660SRS
Cantilever Shelf
Fits Units (in.) (mm) (in.) (mm) (lbs.) (kg) Chrome-Plated Stainless
60" (1525mm) long 12 43 54 1370 11.8 5.4 1254CHC 1254CHS
72" (1825mm) long &
96" (2439mm) long 12 43 60 1525 12.7 5.8 1260CHC 1260CHS
LOAD RATING: 150 lbs. (68 kg.) equally distributed.
Hook
Width Depth Height Approx. Pkd. Wt. Cat. No. Cat. No.
(in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg) Chrome-Plated Stainless
3
/8 12 111/16 43 37/16 87 0.1 0.04 HK23C HK23S
Work Center with Overhead
Manufactured by:
Inside Height Inside Depth Inside Length Approx. Pkd. Wt. Cat. No. Cat. No.
Width Length Approx. Pkd. Wt. Cat. No. Cat. No.
InterMetro Industries Corporation
®
North Washington Street, Wilkes-Barre, PA 18705
Phone: 570-825-2741 • Fax: 570-825-2852
For Product Information Call: 1-800-433-2232
Visit Our Web Site: www.metro.com
Information and specifications are subject to change
without notice. Please confirm at time of order.
L02-120
Rev. 9/00
Printed in U.S.A.
Loading...