METRIX MTX 3281, MTX 3282, MTX 3283 Technical data
MTX 3281
MTX 3282
MTX 3283
"MTX HAND-HELD MULTIMETERS"
From the laboratory to the field, a single diagnostic instrument, powerfull and complete!
● Large swivelling graphic LCD display, bilingual menus (French/English)
● 4 x 100,000 count digital displays, bargraph, graphic measurement log
● Basic precision 0.02 %, pass band 200 kHz
● 3 measurement terminals with automatic selection, complete "AUTORANGING" in current
● 8-key "virtual" measurement selector with "one-hand" direct access
● "SPEC" function for direct display of measurement uncertainties
● With the "AUTOPEAK" mode, no more peak factor limitation
● Frequency measurements up to 2 MHz, durations, duty cycle, counting of events
● Temperature measurements using Pt 100, Pt 1000 probes, J and K thermocouples
● "Preferred measurement" key assigned to any physical quantity (conversion & unit)
● Storage of 6500 measurements with date and time (up to 4 simultaneous parameters)
● Optical RS232, USB, or Bluetooth communication, depending on model
● Power supply by batteries, rechargeable NiMH storage batteries, or main power supply
Graphic digital multimeters
100,000 counts TRMS
Uncompromising performances in the laboratory or on-site
A new standard in metrological
performance and accuracy
Efficient by design: enhanced
handling for ease of use
On its launch, the ASYC2 range from Metrix® established a new
standard in metrological performance, both for its high-performance specifications and its entirely new "virtual adjustment"
functions, representing a breakthrough in field instrument technology.
The latest ASYC3 range (MTX 3281, MTX 3282 and MTX 3283)
continues this tradition of innovation, with top of the range handheld multimeters offering a resolution of 100,000 counts, a basic
precision of 0.02% and a 200 kHz pass band: performance and
precision that sets them apart from the competition.
Innovative features and performances that are user-managed
thanks to the optional calibration software, making periodical
checks faster, easier and more economical.
Their unique design, featuring a multidirectional screen and electronic control switch, makes this range of instruments ideally
suited for both tabletop and hand-held use.
The power supply system is equally innovative, offering all the
benefits of a modern instrument, while combining a rechargeable
accumulator for on-site use, and a mains adapter that also functions as a charger for the laboratory.
Thanks to this dual mains supply system, recordings over longer
periods are no longer vulnerable to untimely power outages on the
instrument.
Compact and robust when not in use, the ASYC3 range's "variable
geometry" design provides enhanced handling and ergonomics
when opened out, thanks to its simple lines and extra-slim casing.
Its "one-hand one-touch" design enables the instrument to be held
and operated by the same hand: measurement functions are
selected by simply pressing on the appropriate key of the electronic control switch.
In addition, a specially designed hands-free carrying pouch leaves
the user free to operate the required lead connections, avoiding
the need for cumbersome fittings and accessories.
For optimal efficiency and safety, the instrument proposes only 3
measurement terminals.
When the mobile lead is connected to the Ampere or Volt terminal,
the corresponding function is automatically selected in AC+DC
mode, complete with auto-ranging, thus reducing handling and
operating to a minimum.
Its fully moulded casing, both self-extinguishing and extra-resistant, offers IP51 protection rating.
Specially designed
for laboratory and field use
Loading...