Metra Electronics LEXUS ES 95-8150 User Manual
INSTALLATION INSTRUCTIONS FOR PART 95-8150
APPLICATIONS
LEXUS ES SERIES
1992-1996
95-8150
KIT FEATURES
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
KIT COMPONENTS
A) Double Din Trim Plate
A
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver • Socket Set
1-800-221-0932
© COPYRIGHT 2004-2007 METRA ELECTRONICS CORPORA
www.metr
aonline.com
TION
95-8150
TABLE OF CONTENTS
Dash Disassembly
-
Lexus ES Series 1992-1996 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
Kit Assembly
- Double DIN Radio Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
- Stacked ISO Mount Units Provision . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Final
*Note:
Refer also to the instructions included with the aftermarket radio.
95-8150 DASH DISASSEMBLY
LEXUS ES SERIES 1992-1996
Disconnect the negative battery ter-
1
minal to prevent an accidental short
circuit.
Unclip and remove the plastic trim
2
piece below the factory radio and
remove (2) Phillips screws exposed
underneath. (
Using a small flat blade screwdriver
3
release the clips securing the a/c vent
assembly and remove the assembly.
(Figure B)
Remove (2) Phillips screws inside of
4
vent cavity.
Pull the climate control/radio assem-
5
bly from the dash and disconnect the
wiring. (
Remove (2) Phillips screws and (4)
6
bolts per side to remove factory
brackets from climate controls and
radio.(Retain the factory brackets,
climate controls and screws to be
re-installed during kit assembly).
Figure A)
(Figure B)
Figure C)
A
B
Continue to kit assembly.
C
1
Loading...