Page 1
METRA - The World’s best kits
®
Installation instructions for part INST-123KI
®
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
• ISO DIN radio provision with pocket
•
ISO DDIN radio provision
• Painted to match factory color and finish
• A) (4) DDIN brackets • B) (3) Radio trim plates • C) Pocket • D) (4) #8 x 3/8” Phillips screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Hyundai/Kia multi-kit 1995-2010
INST-123KI
Dash Disassembly
Hyundai
- Accent/Kia Rio
2006-2010 ...................3
- Elantra 1996-2000 .........3
- Elantra 2001-2006 .........3
- Elantra (radio delete)
2007-2010 ...................4
- Santa Fe 2001-2006.......
4
- Sonata
1995-1998
.........4
- Sonata
1999-2001
.........5
- Sonata
2002-2005
.........5
- Tiburon
1997-2002
........5
- Tiburon
2003-2008
........6
- Tucson
2005-2009
.........6
- XG300/350 2001-2005...
7
- Kia Optima 2001-2006.5
(2006 early production
models only) .....................7
- Kia Sportage 2005-2010 7
Kit Assembly
- All V
ehicles
.....................8
- ISO DIN radio provision
with pocket ....................9
- ISO DDIN radio provision ... 10
Table of Contents
APPLICATIONS
B C
D
A
• Panel removal tool • Phillips screwdriver • Socket wrench
TOOLS REQUIRED
HYUNDAI
Accent 2006-2010
Elantra 1996-2006
Elantra (radio delete)
2007-2010
Santa Fe 2001-2006
Sonata 1995-2005
Tiburon 1997-2008
Tucson 2005-2009
XG 300/350 2001-2005
KIA
Optima (2006 early
production models
only) 2001-2006.5
Rio 2006-2010
Sportage 2005-2010
Page 2
INST-123KI
®
2
Dash Disassembly
Hyundai Accent/Kia Rio 2006-2010
1. Unclip and remove the trim panel surrounding the
radio and including the A/C vents. (Figure A)
2. Remove (4) Phillips screws securing the radio.
(Figure B)
Continue to kit assembly
(Figure B)
Hyundai Elantra 2001-2006
1. Remove (2) Phillips screws from under the
instrument cluster.
2. Remove ashtray then remove (2) Phillips screws in
ashtray cavity.
3. Unclip and remove panel surrounding radio.
(Figure A)
4. Remove (4) Phillips screws securing radio.
Continue to kit assembly
(Figure A)
Hyundai Elantra 1996-2000
1. Unclip and remove the dimmer switch panel then
remove (1) Phillips screw exposed behind.
(Figure A)
2. Unclip and remove shifter trim panel.
3. Remove (1) Phillips screw at bottom of radio trim
panel. (Figure A)
4. Unclip and remove the temperature control
cable under the drivers side dash from the white
plastic bracket.
5. Remove (4) Phillips screws securing radio.
Continue to kit assembly
(Figure A)
(Figure A)
Page 3
INST-123KI
®
Dash Disassembly
3
Hyundai Elantra (radio
delete) 2007-2010
1. Unclip and
remove the panel
surrounding the radio
including the A/C
vents and hazard
button. (Figure A)
2. Remove (4) Phillips
screws to remove
radio. (Figure B)
Continue to kit
assembly
(Figure B)
Hyundai Sonata 1995-1998
1. Unclip and remove trim panel around the shifter.
2. Remove (1) Phillips screw at bottom of radio
trim panel.
3. Unclip and remove radio trim panel. (Figure A)
4. Remove (4) Phillips screws securing the radio.
Continue to kit assembly
(Figure A)
Hyundai Santa Fe
2001-2006
1. Remove the ashtray
and the (2) Phillips
screws exposed in
the cavity.
2. Unclip and remove
trim panel with
climate controls.
3. Remove (2) Phillips
screws facing up
at bottom of radio
trim panel.
4. Unclip and remove
the radio trim panel.
5. Remove (4) Phillips
screws securing
the radio.
Continue to
kit assembly
(Figure A)
1
2
3
4
A/C
(Figure A)
Page 4
INST-123KI
®
Hyundai Sonata 1999-2001
1. Unclip and remove the trim panel in front of the
shift lever and remove (2) Phillips screws exposed
underneath.
2. Unclip and remove the shift lever trim panel.
3. Remove (2) Phillips screws at bottom of radio
trim panel.
4. Unclip and remove radio trim panel. (Figure A)
5. Remove (4) Phillips screws securing the radio.
Continue to kit assembly
(Figure A)
Hyundai Tiburon 1997-2002
1. Unclip and remove the panel surrounding the shift
lever.
2. Unclip and remove the radio trim panel. (Figure A)
3. Remove (2) Phillips screws securing the radio.
Continue to kit assembly
(Figure A)
Hyundai Sonata 2002-2005
1. Unclip and remove entire panel surrounding radio.
(Figure A)
2. Remove (4) Phillips screws securing radio.
Continue to kit assembly
(Figure A)
Dash Disassembly
4
Page 5
INST-123KI
®
Dash Disassembly
Hyundai Tucson 2005-2009
1. Remove screw cover from
back side of shift knob and
remove (2) Phillips screws.
Lift straight up on shift knob
to remove. (Figure A)
2. Unclip and remove shift knob
trim panel. (Figure B)
3. Remove (10) Phillips screws
from dash support under shift
knob trim panel and remove.
(Figure C)
4. Remove (1) Phillips screw
from bottom center of trim
panel surrounding radio
including A/C controls then
unclip and remove panel.
5. Remove (4) Phillips screws to
remove radio.
Continue to kit assembly
Hyundai Tiburon 2003-2008
1. Unclip and remove the radio trim panel starting
with the bottom edge. (Figure A)
2. Remove (2) Phillips screws securing radio.
Continue to kit assembly
(Figure A)
(Figure A) (Figure B) (Figure C)
Push
1
2
3
5
Page 6
INST-123KI
®
6
Hyundai XG300/350 2001-2005
1.
Unclip and remove entire
panel surrounding radio and
climate controls including
pocket assembly at bottom
of panel. (Figure A)
2. Remove (4) Phillips
screws per side to remove
radio and climate control.
Note: It is not necessary
to remove the climate
control. (Figure B)
Continue to kit assembly
(Figure A)
(Figure B)
Kia Optima 2001-2006.5
(2006 early production
models only)
1. Unclip and remove entire
panel surrounding radio.
(Figure A)
2. Remove (4) Phillips
screws securing radio.)
Note: The rear support
bar in the sub dash
will need to be cut and
removed for aftermarket
radio clearance. (Figure B)
Continue to kit assembly
(Figure B)
(Figure A)
Kia Sportage 2005-2010
1. Unclip and remove the entire panel surrounding the
radio and including the A/C controls.
Note: Start at bottom of panel. (Figure A)
2.
Remove (4) Phillips screws securing the radio. (Figure B)
Continue to kit assembly
(Figure B)
(Figure A)
Dash Disassembly
Page 7
INST-123KI
®
7
Kit Assembly
All Vehicles
Cut and remove all tabs except the ones necessary for your application
from the appropriate bracket according to the chart.
Bracket Set # Use Tab Trim plate Applications
1 A T-50-123KI-1
01-06 Hyundai Elantra
02-05 Hyundai Sonata
03-08 Hyundai Tiburon
01-06 Kia Optima
1 B T-50-123KI-1
01-05 Hyundai
XG300/350
1 C T-50-123KI-2 05-10 Kia Sportage
1 D T-50-123KI-2
06-08 Kia Rio &
Hyundai Accent
2 E T-50-123KI-1
96-00 Hyundai Elantra
95-01 Hyundai Sonata
97-02 Hyundai Tiburon
01-06 Hyundai Sante Fe
2 F T-50-123KI-1 05-08 Hyundai Tucson
2 G T-50-123KI-3
07-08 Hyundai Elantra
(radio delete)
D
C
A
B
A
D
1
2
Note:
Kia Rio: Cut and remove shaded area #1.
Hyundai Accent: Cut and remove shaded area #2.
Bracket #1
G
F
E
E
G
F
Bracket #2
Drivers side shown, passenger side
is mirror image.
Page 8
INST-123KI
®
8
ISO DIN radio provision with pocket
1.
Determine which
trim plate
to use according to the
chart and attach the brackets to the trim plate. (Figure A)
2. Slide the pocket into the bottom opening of the trim
plate/bracket assembly and secure the pocket using
the included (4) 3/8” Phillips screws. (Figure B)
3. Remove the metal DIN sleeve and trim ring from the
aftermarket radio.
4. Slide the radio into the opening above the pocket
and secure using the hardware that came with the
radio. (Figure C)
5. Locate the factory wiring harness and antenna
connector in the dash. Metra recommends using
the proper mating adapter from Metra or AXXESS.
Test the radio for proper operation.
6.
Reassemble the dash in reverse order of disassembly.
Figure A
Figure B Figure C
Kit Assembly
Page 9
INST-123KI
®
9
Kit Assembly
ISO DDIN radio provision
1. Determine which trim plate to use according to the chart and attach the
brackets to the trim plate. (Figure A)
2.
Slide the radio into the trim plate/bracket assembly and secure to the assembly
using the screws supplied with the radio. (Figure B)
3. Locate the factory wiring harness and antenna connector in the dash. Metra
recommends using the proper mating adapter from Metra or AXXESS. Test the
radio for proper operation.
4. Reassemble the dash in reverse order of disassembly.
Figure A
Figure B
Loading...