INSTALLATION INSTRUCTIONS FOR PART 99-7870
APPLICATIONS
Honda Ridgeline
2005-2010
99-7870G/99-7870T
KIT FEATURES
• DIN Head Unit Provision With A Pocket
• ISO DIN Head Unit Provision With A Pocket
Painted To Match Factory Dash:
•
G = GRAY, T= TAN
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
• 70-1729 - Honda harness 2009-up or 70-1721 1998-2008
• 40-HD10 - Honda Antenna Adapter 2005-up
KIT COMPONENTS
• A) Radio Housing • B) Radio Housing Brackets (to hold factory pocket below radio) • C) ISO Brackets • D) Trim Plate
• E) Kep Nuts • F) Carriage Bolts
A
B
E
TOOLS REQUIRED:
Small Flat Blade Screwdriver • Phillips Screwdriver
C
F
D
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
99-7870
TABLE OF CONTENTS
Dash Disassembly
Honda Ridgeline 2005-2010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Kit Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2, 3, 4
Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
99-7870
HONDA RIDGELINE 2005-2010
Disconnect the negative battery
1
terminal to prevent an accidental
short circuit.
2
Unclip and remove entire panel surrounding radio and a/c control all the
way over to left side of steering
wheel.
(Figure A)
DASH DISASSEMBLY
A
Remove (5) Phillips screws securing
3
the radio and pocket assembly.
(Figure B)
Remove (2) Phillips screws (1 per
4
side) securing factory pocket to
radio/pocket bracket assembly.
(Figure C, D)
B
CD
1