Vehicle manufacturer specific interface
A manufacturer specific interface is also needed that will interface the tuner with your OEM radio. You will need to
know what Make your vehicle is to make sure you get the correct interface. You can also check the instructions
included with each harness to find out which interface to use for your application.
The interfaces are as follows:
AHDH-D01
For Domestic vehicles including Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, GMC, Hummer, Isuzu, Jeep,
Lincoln, Mazda, Mercury, Oldsmobile, Pontiac, and Saturn.
AHDH-EU1
For European vehicles including Audi, BMW, Hyundai, and Volkswagen.
AHDH-I01
For Import vehicles including Acura, Honda, Infiniti, Mazda, Nissan, Scion, and Toyota.
Optional Accessories
XIA-LCD
If your OEM radio does not display text you can use the XIA-LCD, the LCD display screen. This unit plugs into one
of the AHDI interfaces; AHDI-D01, AHDI-EU1, or AHDI-I01, and will show any HD information that is to be displayed.
XIAH-IPC
The AHDI interfaces will also allow the use of an iPod. With the XIAH-IPC iPod cable your iPod can play through
your OEM radio, be controlled by the buttons on your OEM radio, and charge your iPod too.
XIAH-RC
A
The AHDI interfaces will allow any auxiliary audio in that uses rca’s. This is a great alternative to a fm modulator
and the sound quality is superior.
Installing the AHDT-01
Once you have all the parts needed for your particular vehicle you can begin the installation. This is just a brief
overview how to install the parts, please refer to the AHDH vehicle specific harness instructions for detailed stepby-step instructions. (Also Refer to Diagram “A” on page 12)
Step 1) If the OEM radio has an anti-theft security feature please make sure you have the security code before
continuing. Disconnect the negative battery cable to prevent any accidental short circuit during the install.
Step 2) Uninstall, unplug, and remove the OEM radio. Some vehicles will not need this step since the AHDH harness will plug into a tuner pack or a cd changer harness located in the trunk/hatch of the vehicle. The AHDH harnesses listed above will detail where the harness will plug into.
Step 3) Using the AHDT-01 HD tuner
, plug the 6” male-to-male antenna adapter into either the ANT IN or ANT
OUT, it doesn’t matter
Continued on pa
ge 11
10
AHDT-01