Metra Electronics 99-7610B, 99-7610HG User Manual
INSTALLATION INSTRUCTIONS FOR PART 99-7610
INSTALLATION INSTRUCTIONS FOR PART 99-7610
APPLICATIONS
2007-up
Nissan Versa
2011 Nissan Juke
99-7610B
99-7610HG
KIT FEATURES
• DIN head unit provisions with pocket
• ISO DIN head unit provision with pocket
• Double DIN mount radio provision
• B = Matte Black
• HG = Gloss Black
KIT COMPONENTS
A) Radio Housing • B) ISO Brackets • C) Trim Plate • D) DDIN Trim Plate
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
• 70-7552 - 2007-up Nissan Harness
A
B
• 40-NI12 - 2007-up Nissan Antenna Adapter
C
1-800-221-0932
D
TOOLS REQUIRED:
Panel Removal Tool • Phillips Screwdriver
Socket Wrench
METRA. THE WORLD’S BEST KITS.
metraonline.com
© COPYRIGHT 2011 METRA ELECTRONICS CORPORATION
™
INSTALLATION INSTRUCTIONS FOR PART 99-7610
TABLE OF CONTENTS
Dash Disassembly
- Nissan Versa 2007-up..............................................................................1
- Nissan Juke 2011....................................................................................2
Kit Assembly
- DIN Mount Radio Provision with Pocket .................................................. 3
- ISO Mount Radio Provision with Pocket ............................................... 4-5
- Double DIN Mount Radio Provision ..........................................................6
Caution
Metra recommends disconnecting the negative battery terminal before beginning
any installation. All accessories, switches, and especially air bag indicator lights
must be plugged in before reconnecting the battery or cycling the ignition.
Note: Refer also to the instructions included with the aftermarket radio.
Metra recommends MECP
certified technicians
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
99-7610 DASH DISASSEMBLY
2007-UP NISSAN VERSA
1. Unclip and remove the panel above
the radio. (Figure A, B)
2. Remove (2) Phillips screws securing
the radio trim panel then unclip and
remove the entire panel surrounding
the radio and a/c controls. (Figure C)
3. Remove (4) Phillips screws securing
radio, unplug and remove radio.
(Figure D)
Continue to kit assembly.
Figure C
RADIO
CD
PRESET A-B-C
LOAD
DISP
SCRL
1
SEEK
TRACK
FILE
CAT
PUSH
AUDIO
2
PWR
SCAN
3
VOL
CLOCK
6CD CHANGER
RPT
4
RDM
TUNE
5
AUX
FF-REW
FOLDER
6
CH
Figure A
Figure B
Figure D
1
99-7610 DASH DISASSEMBLY
2011 NISSAN JUKE
1. Unclip and remove the climate control
panel. (Figure A)
2. Remove (2) Phillips screws securing
the radio trim panel. (Figure B)
3. Remove (4) Phillips screws securing
radio, unplug and remove radio.
(Figure C)
Continue to kit assembly.
Figure A
2
Figure B
Figure C
Loading...