INSTALLATION INSTRUCTIONS FOR PART 99-3306
APPLICATIONS
Chevrolet Aveo sedan 2007-2010
Pontiac G3 2007-2009
99-3306
KIT FEATURES
• DIN Mount Radio Provision with Pocket
• ISO Mount Radio Provision with Pocket
• Double DIN Mount Radio Provision
• Stacked ISO Units Provision
KIT COMPONENTS
A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets
• E) Double DIN Trim Plate • F) Pocket
A
E
F
Small Flat Blade Screwdriver/ Panel Removal Tool
1-800-221-0932
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
B
WIRING AND ANTENNA CONNECTIONS: (Sold Separately)
Wiring Harness
• 70-2105 - GM harness 2006-up
• 70-8405 - GM/Suzuki/Daewoo harness 1999-up
Antenna Adapter:
• 40-CR10 - CHRYSLER/GM antenna adapter 2002-up
TOOLS REQUIRED:
• Phillips Screwdriver • Socket Set
C
:
www.metraonline.com
D
99-3306
K
NOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take
steps toward a better tomorrow.
TABLE OF CONTENTS
Dash Disassembly
-
Chevrolet Aveo 2007-2010.. . . . . . . . . . . . . . . . . . . . . .
-
Pontiac G3 2007-2009 . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 1
. . . . . . 1
Kit Assembly
- DIN Mount Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . . 2
- ISO Mount Radio Provision with Pocket. . . . . . . . . . . . . . . . . . . . . . . . 3
- Double DIN Radio Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
- Stacked ISO Units Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Final
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
*Note:
Refer also to the instructions included with the aftermarket radio.
99-3306 DASH DISASSEMBLY
1
1
2
2
3
3
4
4
5
6
SOUND
S
CAN
AST
A/C
123
4
5
6
SOUND
SCAN
A
ST
A
/C
CHEVROLET AVEO 2007-2010
PONTIAC G3 2007-2009
Disconnect the negative battery ter-
1
minal to prevent an accidental short
circuit.
Unclip and remove trim panel around
2
radio. (
Figure A)
Remove (4) 9/32” screws securing
3
the radio. Unplug and remove radio.
(
Figure B)
A
Continue to kit assembly.
B
1
99-3306 KIT ASSEMBLY
DIN MOUNT RADIO PROVISION WITH POCKET
*Note: Refer also to the instructions included with the aftermarket radio.
A
Slide the DIN cage into the Radio
1
Housing and secure by bending the
metal locking outward.
Slide the aftermarket radio into the DIN
2
cage until it snaps into place.
3
Snap the pocket into the radio housing.
(Figure C)
(Figure A)
(Figure B)
Continue to final assembly.
B
C
2
99-3306 KIT ASSEMBLY
ISO MOUNT RADIO PROVISION WITH POCKET
*Note: Refer also to the instructions included with the aftermarket radio.
Mount the ISO Brackets to the radio
1
using the screws supplied with the
radio.
(Figure A)
Slide the radio into the radio opening
2
until it snaps into place.
Snap the ISO Trim Plate onto the front
3
of the Radio Housing.
4
Snap the pocket into the radio hous-
(Figure C)
ing.
Continue to final assembly.
(Figure B)
(Figure B)
A
B
3
C
99-3306 KIT ASSEMBLY
DOUBLE DIN MOUNT RADIO PROVISION
*Note: Refer also to the instructions included with the aftermarket radio.
A
Cut and remove the center bar from
1
the radio housing.
Snap the Double DIN brackets to the
2
inside edge of the radio housing.
(Figure B)
3
Slide the Double DIN radio into the
bracket/radio housing assembly and
secure the radio to the assembly using
the screws supplied with the radio.
(Figure C)
Snap the Double DIN trim-plate onto
4
the front of the housing/radio assembly.
(Figure C)
(Figure A)
B
Continue to final assembly.
C
4
99-3306 KIT ASSEMBLY
STACKED ISO UNITS PROVISION
*Note: Refer also to the instructions included with the aftermarket radio.
A
1
Cut and remove the center bar from
the radio housing.
2
Snap the Double DIN brackets to the
inside edge of the radio housing.
(Figure B)
3
Slide the stacked ISO units into the
bracket/radio housing assembly and
secure the units to the assembly using
the screws supplied with the units.
(Figure C)
4
Snap the Double DIN trim-plate onto
the front of the housing/radio assem-
(Figure D)
bly.
(Figure A)
B
Continue to final assembly.
D
C
5
99-3306 FINAL ASSEMBLY
FINAL ASSEMBLY
A
(A) Strip wire ends back 1/2"
B
B) Twist ends together
C) Solder
C
D
Locate the factory wiring harness in the dash. Metra recommends using the
1
proper mating adapter and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.)
Re-connect the negative battery terminal and test the unit for proper operation.
2
Reassemble radio and dash assemblies in reverse order of disassembly.
3
D) Tape
FINAL WIRING CONNECTIONS
Make wiring connections using the EIA color code chart shown below and the instructions included with the
head unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and
individually tape off ends of any unused wires to prevent electrical short circuit.
METRA / EIA WIRING CODE
12V Ignition / Acc . . . . . . . . . . Red
12V Batt / Memory. . . . . . . . . Yellow
Ground. . . . . . . . . . . . . . . . . . Black*
Power Antenna. . . . . . . . . . . . Blue
Amp Turn-On . . . . . . . . . . . . . Blue / White
Amp Ground. . . . . . . . . . . . . . Black / White
Illumination . . . . . . . . . . . . . . Orange
Dimmer . . . . . . . . . . . . . . . . . Orange / White
Right Front (+) . . . . . . . . . . . . Gray
Right Front (-). . . . . . . . . . . . . Gray/ Black
Left Front (+) . . . . . . . . . . . . . White
Left Front (-). . . . . . . . . . . . . . White / Black
Right Rear (+) . . . . . . . . . . . . Violet
Right Rear (-) . . . . . . . . . . . . . Violet / Black
Left Rear (+) . . . . . . . . . . . . . Green
Left Rear (-) . . . . . . . . . . . . . . Green / Black
*NOTE: When a Black wire is not present, ground radio to vehicle chassis.
All colors may not be present on all leads due to manufacturer’s specifications.
1-800-221-0932
REV. 04/21/10 © COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION INST99-3306
www.metraonline.com
6
Loading...