– Hyundai Santa Fe 2013-up ................................... 2
Kit Assembly
– DDIN radio provision ............................................ 3
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
1. Unclip and remove the A/C vents
from the left and right side of the
factory radio. (Figure A)
2. Remove (4) Phillips screws
securing the radio. (Figure B)
Continue to kit assembly
95-7354B
Dash Disassembly
(Figure A)(Figure B)
2
Page 3
DDIN head unit provisions
1. Attach the radio brackets to the
radio panel with the provided
(4) #8 x 3/8” Phillips screws.
(Figure A)
2. Mount the aftermarket radio to
the radio brackets/radio panel
assembly using the screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS.
Re-connect the negative battery
terminal and test the unit for
proper operation.
4. Reassemble dash in reverse order
of disassembly.
(Figure A)
95-7354B
Kit Assembly
(Figure B)
3
Page 4
INSTALLATION INSTRUCTIONS FOR PART 95-7354B
REV. 3/28/2013 INST95-7354B
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7354B
AplicAciones
Hyundai Santa Fe 2013 y mas
95-7354B
cArActerísticAs del kit
• Provisión de unidad central DDIN
• Pintura negra
componentes del kit
• A) Panel del radio • B) Soportes para radio • C) (4) tornillos Phillips #8 x 3/8”
A
cABleAdo Y coneXiones de AntenA (se venden por separado)
Arnés de cableado: • Arnés 70-7304 para Kia/Hyundai 2010 y más recientes
Adaptador de antena: • Adaptador de antena 40-KI11 para KIA/Hyundai 2010 y más recientes
REV. 3/28/2013 INST95-7354B
BC
Indice
Desmontaje del tablero
– Hyundai Santa Fe 2013 y mas .............................. 2
Ensamble del kit
– Provisiones de unidad central DDIN ...................... 3
HerrAmientAs requeridAs
• Destornillador Phillips • Pequeño destornillador
de paleta • Herramienta para quitar paneles
PRECAUCIÓN: Metra recomienda desconectar el terminal
negativo de la batería antes de comenzar cualquier
instalación. Todos los accesorios, interruptores y,
especialmente, las luces indicadoras de airbag deben
estar enchufados antes de volver a conectar la batería o
comenzar el ciclo de ignición.
Nota: Remítase a las instrucciones incluidas con el radio
de posventa.
1. Desenganche y quite las rejillas
del aire acondicionado del lado
izquierdo y derecho del radio de
fábrica. (Figura A)
2. Quite los (4) tornillos Phillips que
sujetan el radio. (Figura B)
Continuará la ensamble del kit
99-7354B
Desmontaje del tablero
(Figura A)(Figura B)
2
Page 7
Provisiones de unidad central
doble DIN:
1. Coloque los soportes del radio
en el panel del radio con los
(4) tornillos Phillips #8 x 3/8”
suministrados. (Figura A)
2. Monte el radio de mercado
secundario en el ensamble de los
soportes de radio/ensamble del
panel del radio con los tornillos
que vienen con el radio. (Figura B)
3. Localice el arnés de cables de
fábrica en el tablero. Metra
recomienda el uso de un adaptador
adecuado de acoplamiento de
Metra o de AXXESS. Vuelva a
conectar la terminal negativa
de la batería y pruebe la unidad
para verificar que funcione
correctamente.
4. Vuelva a armar el tablero al revés
de como lo desarmó.
(Figura A)
99-7354B
Ensamble del kit
(Figura B)
3
Page 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7354B
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
REV. 3/28/2013 INST95-7354B
METRA. The World’s best kits.
EL CONOCIMIENTO ES PODER
Mejore sus habilidades de instalación y fabricación
inscribiéndose en la escuela de dispositivos electrónicos
móviles más reconocida y respetada de nuestra industria.
Regístrese en www.installerinstitute.com o llame al
800-354-6782 para obtener más información y avance
hacia un futuro mejor.
Metra recomienda técnicos
con certificación del Programa
de Certificación en Electrónica
Móvil (Mobile Electronics
Certification Program, MECP).