70-6522
70-6522
70-6522
70-6522
INSTALLATION
INSTRUCTIONS
Chrysler/Dodge/Jeep
2007-Up
Wiring
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2001-2009 METRA ELECTRONICS CORPORATION
Harness
70-6522
INSTALLATION
INSTRUCTIONS
Chrysler/Dodge/Jeep
2007-Up
Wiring
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2001-2009 METRA ELECTRONICS CORPORATION
Harness
70-6522
INSTALLATION
INSTRUCTIONS
Chrysler/Dodge/Jeep
2007-Up
Wiring
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2001-2009 METRA ELECTRONICS CORPORATION
Harness
70-6522
INSTALLATION
INSTRUCTIONS
Chrysler/Dodge/Jeep
2007-Up
Wiring
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2001-2009 METRA ELECTRONICS CORPORATION
Harness
70-6522
INSTALLATION
INSTRUCTIONS
Chrysler/Dodge/Jeep
2007-Up
Wiring
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2001-2009 METRA ELECTRONICS CORPORATION
Harness
INSTALLATION
INSTRUCTIONS
Chrysler/Dodge/Jeep
2007-Up
Wiring
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2001-2009 METRA ELECTRONICS CORPORATION
Harness
INSTALLATION
INSTRUCTIONS
Chrysler/Dodge/Jeep
2007-Up
Wiring
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2001-2009 METRA ELECTRONICS CORPORATION
Harness
INSTALLATION
INSTRUCTIONS
Chrysler/Dodge/Jeep
2007-Up
Wiring
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2001-2009 METRA ELECTRONICS CORPORATION
Harness
2007 AND UP
CHRYSLER/DODGE/JEEP VEHICLES
2007 AND UP
CHRYSLER/DODGE/JEEP VEHICLES
2007 AND UP
CHRYSLER/DODGE/JEEP VEHICLES
2007 AND UP
CHRYSLER/DODGE/JEEP VEHICLES
Due to the fact that a switched 12-volt
accessory
factory
must
lead does NOT exist in the
harness, an accessory source
be located.
1. Using the separate red wire provided with
the fuse tap, locate an accessory power
source in the vehicle’s fuse box.
2. Connect this red wire to the aftermarket
head unit switched accessory lead.
3. Use Metra’s standard wiring instructions
for the remainder of the installation.
Rev. 04-10-09
2007 AND UP
CHRYSLER/DODGE/JEEP VEHICLES
Due to the fact that a switched 12-volt
accessory
factory
must
lead does NOT exist in the
harness, an accessory source
be located.
1. Using the separate red wire provided with
the fuse tap, locate an accessory power
source in the vehicle’s fuse box.
2. Connect this red wire to the aftermarket
head unit switched accessory lead.
3. Use Metra’s standard wiring instructions
for the remainder of the installation.
Rev. 04-10-09
2007 AND UP
CHRYSLER/DODGE/JEEP VEHICLES
Due to the fact that a switched 12-volt
accessory
factory
must
lead does NOT exist in the
harness, an accessory source
be located.
1. Using the separate red wire provided with
the
fuse tap, locate an accessory power
source
in the vehicle’s fuse box.
2. Connect this red wire to the aftermarket
head
unit switched accessory lead.
3. Use Metra’s standard wiring instructions
for
the remainder of the installation.
Rev. 04-10-09
2007 AND UP
CHRYSLER/DODGE/JEEP VEHICLES
Due to the fact that a switched 12-volt
accessory
factory
must
lead does NOT exist in the
harness, an accessory source
be located.
1. Using the separate red wire provided with
the
fuse tap, locate an accessory power
source
in the vehicle’s fuse box.
2. Connect this red wire to the aftermarket
head
unit switched accessory lead.
3. Use Metra’s standard wiring instructions
for
the remainder of the installation.
Rev. 04-10-09
2007 AND UP
CHRYSLER/DODGE/JEEP VEHICLES
Due to the fact that a switched 12-volt
accessory
factory
must
lead does NOT exist in the
harness, an accessory source
be located.
1. Using the separate red wire provided with
the fuse tap, locate an accessory power
source in the vehicle’s fuse box.
2. Connect this red wire to the aftermarket
head unit switched accessory lead.
3. Use Metra’s standard wiring instructions
for the remainder of the installation.
Rev. 04-10-09
Due to the fact that a switched 12-volt
accessory
factory
must
lead does NOT exist in the
harness, an accessory source
be located.
1. Using the separate red wire provided with
the fuse tap, locate an accessory power
source in the vehicle’s fuse box.
2. Connect this red wire to the aftermarket
head unit switched accessory lead.
3. Use Metra’s standard wiring instructions
for the remainder of the installation.
Rev. 04-10-09
Due to the fact that a switched 12-volt
accessory
factory
must
lead does NOT exist in the
harness, an accessory source
be located.
1. Using the separate red wire provided with
the
fuse tap, locate an accessory power
source
in the vehicle’s fuse box.
2. Connect this red wire to the aftermarket
head
unit switched accessory lead.
3. Use Metra’s standard wiring instructions
for
the remainder of the installation.
Rev. 04-10-09
Due to the fact that a switched 12-volt
accessory
factory
must
lead does NOT exist in the
harness, an accessory source
be located.
1. Using the separate red wire provided with
the
fuse tap, locate an accessory power
source
in the vehicle’s fuse box.
2. Connect this red wire to the aftermarket
head
unit switched accessory lead.
3. Use Metra’s standard wiring instructions
for
the remainder of the installation.
Rev. 04-10-09
Loading...