Metra 95-7624 Installation
Installation Instructions for 95-7624
Nissan Multi-kit 2007-up
KIT FEATURES
• Double DIN radio provision
APPLICATIONS
(see application list on page 2)
95-7624
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7552 - Nissan 2007-up
Antenna Adapter: • 40-NI12 - Nissan 2007-up
KIT COMPONENTS
• A) Radio housing trim panel, standard • B) Radio housing trim panel, wide • C) Bracket #1
• D) Bracket #2 • E) Bracket #3 • F) Spacers
A
F
REV. 1/9/2015 INST95-7624
METRA. The World’s best kits.
B C D E
™
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com1-800-221-0932
© COPYRIGHT 2014 METRA ELECTRONICS CORPORATION
95-7624
Applications
Chevrolet
City Express 2015-up
Nissan
Cube 2009-up
Frontier (with 4.3” screen) 2013-up
Juke 2011-up
NV 2012-up
NV200 2013-up
Quest (without NAV or rear seat entertainment) 2011-up
Rogue 2011-up
Rogue Select 2014
Titan (with 4.3” screen) 2013-up
Versa 2007-up
Versa Note 2014-up
Xterra (with 4.3” screen) 2013-up
Table of Contents
Dash Disassembly
– Cube 2009-up .................................................................................................... 3
– Frontier/Xterra (with 4.3” screen) 2013-up ........................................................ 3
– Juke 2011-up .................................................................................................... 4
– NV 2012-up .......................................................................................................5
– NV200 2013-up, Chevrolet City Express 2015-up ............................................... 6
– Quest (without NAV or rear seat entertainment) 2011-up .................................7-8
– Rogue 2011-2013 .............................................................................................. 9
– Rogue Select 2014 ............................................................................................. 9
– Titan (with 4.3” screen) 2013-up......................................................................10
– Versa 2007-2011 ............................................................................................. 10
– Versa 2012-up .................................................................................................11
– Versa Note 2014-up ......................................................................................... 11
Kit Assembly
– Radio housing trim panel usage .......................................................................12
– Bracket tab layouts .....................................................................................13-15
– Double DIN radio provision ............................................................................... 16
2
95-7624 Dash Disassembly
Nissan Frontier/Xterra (with 4.3” screen) 2013-upNissan Cube 2009-up
1. Remove (2) Phillips screws from
the bottom of the a/c trim panel
then unclip and remove the panel.
(Figure A,B)
2. Remove (2) Phillips screws from
the bottom of the radio trim panel
then unclip and remove the panel.
(Figure C)
3. Remove (4) Phillips screws
securing radio to dash to remove.
Continue to kit assembly
(Figure A)
(Figure B)
(Figure C)
PASS AIRBAG
A/C
1. Unclip and remove the trim panel
above the radio and climate controls.
(Figure A)
2. Remove the (1) Phillips screw under
panel and the (2) Phillips screws
securing the radio brackets to the
sub dash. (Figure B)
3. Unclip and remove the entire panel
(Figure B)
including the climate controls and
factory radio.
4. Remove (4) Torx screws securing the
radio to the trim panel. (Figure C, D)
Continue to kit assembly
(Figure C)
OFF
(Figure A)
(Figure D)
3
1. Unclip and remove the climate
control panel. (Figure A)
2. Remove (2) Phillips screws
securing the radio trim panel.
(Figure B)
3. Remove (4) Phillips screws
securing radio, unplug and remove
radio. (Figure C)
Continue to kit assembly
95-7624 Kit Assembly95-7624 Dash Disassembly
Nissan Juke 2011-up
(Figure A)
(Figure B)
(Figure C)
4
95-7624 Dash Disassembly
Nissan NV 2012-up
1. Unclip and remove the A/C vent to
the right side of the factory radio.
(Figure A)
2. Remove the (2) Phillips screws
exposed behind vent on radio trim
panel. (Figure B)
3. Unclip and remove the left A/C
vent next to the instrument display.
(Figure C)
4. Unclip the top edge of the knee
bolster panel below the steering
column and let hang. (Figure D)
5. Unclip the circle trim around the
key cylinder.
6. Unclip and remove the gauge
cluster trim panel. (Figure E)
7. Remove (2) Phillips screws
exposed behind the panel on the
(Figure B) (Figure F)
(Figure C) (Figure G)
(Figure D)(Figure A) (Figure H)(Figure E)
left side of the radio trim panel.
(Figure F)
8. Unclip and remove the trim panel
surrounding the factory radio.
(Figure G)
9. Remove (4) Phillips screws
securing the radio. (Figure H)
Continue to kit assembly
5
Chevrolet City Express 2015-up, Nissan NV200 2013-up
1. Unclip and remove the recirculate/
fresh slide button. (Figure A)
2. Unclip and remove the entire panel
surrounding the radio including the
a/c vents. (Figure B)
3. Remove (4) Phillips screws
securing the radio. (Figure C)
Continue to kit assembly
95-7624 Kit Assembly95-7624 Dash Disassembly
(Figure A) (Figure B) (Figure C)
6
95-7624 Dash Disassembly
Nissan Quest (without NAV or rear seat entertainment) 2011-up
1. Unclip and remove the panels from
the bottom left and right side of the
center console. (Figure A)
2. Remove (2) clips per side exposed
behind lower panels. (Figure B)
3. Unclip and pull center console
toward rear of vehicle.
Note: You do not have to fully
remove console. (Figure C)
4. Unclip and remove the trim panel
to the left of the shifter housing the
start/stop button. (Figure D)
(Figure B)
(Figure C)
(Figure D)(Figure A)
5. Unclip and remove the panel on
the end of the passenger side of
the dash. (Figure E)
6. Remove (1) Phillips screw from
the trim panel above the glove box
then unclip and remove the panel.
(Figure F)
Continued on next page
(Figure E)
(Figure F)
7
95-7624 Kit Assembly95-7624 Dash Disassembly
Nissan Quest (without NAV or rear seat entertainment) 2011-up
7. Remove (1) Phillips screw from the
cup holder panel then unclip and
remove the panel. (Figure G)
(Figure G)
8. Remove (2) Phillips screws from
the a/c control panel and unclip
and let hang. (Figure H)
9. Remove (2) Phillips screws from
the bottom of the radio trim panel
including the vents then unclip and
remove the panel. (Figure H)
(Figure H)
8
10. Remove (4) Phillips screws
securing the radio. (Figure I)
Continue to Kit Assembly
(Figure I)
1. If equipped with center speaker:
Unclip and remove the grille then
remove (4) Phillips screws to
remove the speaker. (Figure A)
2. Unclip and remove the panel below
the radio including the a/c controls.
(Figure B)
3. Unclip the radio trim including the
a/c vents then unplug the hazard
switch and remove the panel.
(Figure C)
4. Remove (4) Phillips screws
securing the radio. (Figure D)
Continue to kit assembly
95-7624 Dash Disassembly
Rogue 2011-2013, Rogue Select 2014
(Figure A)
(Figure C)
(Figure B)
(Figure D)
9
95-7624 Kit Assembly95-7624 Dash Disassembly
Nissan Titan (with 4.3” screen) 2013-up Nissan Versa 2007-2011
1. Unclip the entire dash panel
including the climate controls.
Unplug and remove the panel.
(Figure A)
2. Remove (4) Phillips screws
securing the radio. Unplug and
remove the chassis. (Figure B)
Continue to kit assembly
(Figure A)
(Figure B)
1. Unclip and remove the panel
above the radio. (Figure A, B)
2. Remove (2) Phillips screws
securing the radio trim panel then
unclip and remove the entire panel
surrounding the radio and A/C
controls. (Figure C)
3. Remove (4) Phillips screws
securing radio, unplug and remove
radio. (Figure D)
Continue to kit assembly
(Figure A)
10
(Figure B)
(Figure C)
(Figure D)
RADIO
CD
PRESET A-B-C
LOAD
DISP
SCRL
1
SEEK
PUSH
TRACK
AUDIO
2
PWR
FILE
SCAN
3
VOL
CAT
CLOCK
6CD CHANGER
RPT
4
RDM
TUNE
5
AUX
FF-REW
FOLDER
6
CH
1. Unclip and remove the entire panel
surrounding the radio including the
A/C vents. (Figure A)
2. Remove (4) Phillips screws
securing the radio. (Figure B)
Continue to kit assembly
95-7624 Dash Disassembly
Versa 2012-up, Versa Note 2014-up
(Figure A) (Figure B)
11
95-7624 Kit Assembly
Radio housing trim panel usage
Vehicle Trim panel
Cube 2009-up Standard
Frontier (with 4.3” screen) 2013-up Wide
Juke 2011-2014 Standard
Juke 2015-up Wide
NV 2012-up Standard
NV200 2013-up, Chevrolet City Express 2015-up (both without NAV) Standard
NV200 2013-up, Chevrolet City Express 2015-up (both with NAV) Wide
Quest (without NAV or rear seat entertainment) 2011-2012 Standard
Quest (without NAV or rear seat entertainment) 2013-up Wide
Rogue Select (with lower model radio) 2014 Standard
Rogue Select (with upper model radio) 2014 Wide
Rogue S (with Special Edition Package) 2012-2013 Wide
Rogue SV 2012-2013 Wide
Rogue S and SV (with SL Package) 2003-2007 Standard
Rogue 2011 Standard
Titan (with 4.3” screen) 2013-up Wide
Versa 2007-2011 Standard
Versa 2012-2013 Standard
Versa S, S+ and SV (without options) 2014 Standard
Versa Note 2014 Wide
Versa SL and SV (with Convenience Package) 2014 Wide
Versa and Versa Note (all models) 2015-up Wide
Xterra (with 4.3” screen) 2013-up Wide
Standard trim panel Wide trim panel
12
Loading...