Metra 95-7618G Owner's Manual

INSTALLATION INSTRUCTIONS FOR PART 95-7618G

APPLICATIONS

Nissan Sentra 2013-up

95-7618G

KIT FEATURES

• Double DIN Head unit provisions

• Painted Grey to match factory dash

KIT COMPONENTS

• A) Radio Trim Panel • B) Radio Brackets • C) (4) White Panel Clips

A

WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7552 2010-Up Nissan Harness

Antenna Adapter: • 40-NI12 2010-Up Nissan Antenna Adapter

TOOLS REQUIRED

REV. 3/28/2013 INST95-7618G

• Panel removal tool • Phillips screwdriver • Socket Wrench

B C

Table of Contents

Dash Disassembly

– Nissan Sentra 2013-up ........................................ 2

Kit Assembly

– Double DIN head unit provisions ........................... 3

CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the
aftermarket radio.

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION

1. Unclip and remove the trim panel
surrounding the radio. (Figure A)

2. Remove (4) Phillips screws
securing the radio. (Figure B)

Continue to kit assembly

95-7618G

Dash Disassembly

(Figure A) (Figure B)

2

Double DIN head unit provisions

1. Attach the (4) white panel clips to

the radio housing

2. Attach the radio brackets to the
aftermarket DDIN radio with the
screws supplied with the radio.
(Figure A)

3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.

4. Reassemble dash in reverse
order of disassembly using the
95-7618G radio trim panel instead
of the factory panel.

95-7618G

Kit Assembly

(Figure A)

3