Metra 95-3312G Installation

Installation Instructions for 95-3312G

Pontiac Firebird 1993-2002

95-3312G

KIT FEATURES

• Double DIN radio provision

• Painted dark gray

KIT COMPONENTS

• A) Radio trim panel • B) Brackets • C) (4) Panel Clips

A

WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1858
Antenna Adapter: • 40-GM10

REV. 11/25/2014 INST95-3312G

B C

APPLICATIONS

Table of Contents

Dash Disassembly

– Pontiac Firebird 1993-2002 ................................... 2

Kit Assembly

– Double DIN radio provision ................................... 3

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

• Socket wrench

CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the
aftermarket radio.

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

© COPYRIGHT 2014 METRA ELECTRONICS CORPORATION

1. Unclip the radio trim bezel.
Remove (4) 7mm hex-head screws
securing the factory radio and
disconnect the wiring. (Figure A)

2. Move the climate controls out of
the way and cut the plastic shelf
between the radio opening and
the factory climate controls.

Continue to kit assembly

95-3312G

Dash Disassembly

(Figure A)

2

Double DIN radio provision

1. Attach the four included panel clips

to the radio housing. (Figure A)

2. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.

3. Attach the radio to the brackets
with the screws supplied with the
radio and mount into the dash
opening. (Figure B)

4. Snap the radio trim panel over the
radio/bracket assembly.

95-3312G

Kit Assembly

(Figure A) (Figure B)

3