PL,PV,PC
POTATO PEELERS
User manual
rev 2.0
rev 2.0
04.08.2005
3
Dear Customer,
Congratulations on deciding to choose a Metos appliance for your kitchen activities. You made an
excellent choice. We will do our best to make you a satisfi ed Metos customer like thousands of customers we have around the world.
Please read this manual carefully. You will learn correct, safe and effi cient working methods in order to
get the best possible benefi t from the appliance. The instructions and hints in this manual will give you
a quick and easy start, and you will soon note how nice it is to use the Metos equipment.
All rights are reserved for technical changes.
You will fi nd the main technical data on the rating plate fi xed to the equipment. When you need service
or technical help, please let us know the serial number shown on the rating plate. This will make it
easier to provide you with correct service.
For your convenience, space is provided below for you to record your local Metos service contact
information.
METOS TEAM
Metos service phone number:
Contact person:
4
rev 2.0
04.08.2005
Contents
1 GENERAL ...........................................................................................................6
1.2 Symbols used in the manual ................................................................................................6
1.3 Symbols used on the appliance ...........................................................................................6
1.4 Checking the relationship of the appliance and the manual .................................................6
2 SAFETY ..............................................................................................................7
2.1 General warnings ...................................................................................................................7
2.2 Safety plates ..........................................................................................................................8
3.Functional description .........................................................................................9
3.1 IDENTIFICATION OF THE .....................................................................................................9
COMPONENTS ..........................................................................................................................9
3.2 IDENTIFICATION OF THE MACHINE ...................................................................................9
3.3 APPLICATIONS, INTENDED USE .......................................................................................10
3.4 Safety device ........................................................................................................................10
3.5 Operator areas .....................................................................................................................11
3.6 CONTROL PANEL AND PILOT LIGHTS .............................................................................11
4.Operation instructions .......................................................................................12
4.1 - FUNCTIONING ..................................................................................................................12
4.1.1 Food preparation ..........................................................................................................12
4.1.2 Setting of the machine and start .................................................................................13
4.1.3 Optional .......................................................................................................................15
4.1.4 INSTALLATION OF OPTIONAL ACCESSORIES ........................................................16
6. After use ...........................................................................................................17
6.1 Cleaning of the machine .....................................................................................................17
6.2 Cleaning of electro magnetic valve fi lter (except for Mod. PL6/PC3) .................................18
7. Installation ........................................................................................................19
7.1 Unpacking ............................................................................................................................19
7.2 -MACHINE LIFTING ............................................................................................................20
7.3 - ASSEMBLING THE FEET .................................................................................................20
7.4 - MACHINE INSTALLATION ................................................................................................21
7.4.1 Installation on bench (PL6/PC3 only) ...........................................................................21
7.4.2 Installation on the fl oor ................................................................................................21
7.5 Water connections ...............................................................................................................22
7.6 ELECTRICAL CONNECTION .............................................................................................23
7.7 FIRST START .....................................................................................................................24
8. Troubleshooting ...............................................................................................25
TECHNICAL INFORMATION ...............................................................................40
rev 2.0
04.08.2005
5
6
rev 2.0
04.08.2005
General
Carefully read the instructions in this manual as they contain important information regarding proper, effi cient and safe installation, use and maintenance of the
appliance.
Keep this manual in a safe place for eventual use by other operators of the appliance.
The installation of this appliance must be carried out in accordance with the
manufacturer’s instructions and following local regulations. The connection of
the appliance to the electric and water supply must be carried out by qualifi ed
persons only.
Persons using this appliance should be specifi cally trained in its operation.
Switch off the appliance in the case of failure or malfunction. The periodical
function checks requested in the manual must be carried out according to the
instructions. Have the appliance serviced by a technically qualifi ed person authorized by the manufacturer and using original spare parts.
Not complying with the above may put the safety of the appliance in danger.
1 GENERAL
1.2 Symbols used in the manual
This symbol informs about a situation where a safety risk might be at hand.
Given instructions are mandatory in order to prevent injury.
This symbol informs about the right way to perform in order to prevent bad
results, appliance damage or hazardous situations.
This symbol informs about recommendations and hints that help to get the best
performance out of the appliance.
1.3 Symbols used on the appliance
This symbol on a part informs about electrical terminals behind the part. The
removal of the part must be carried out by qualifi ed persons only.
This symbol is applied near zones where high temperature may occur.
The rating plate of the appliance indicates the serial number of the appliance. If
the manuals are missing, it is possible to order new ones from the manufacturer
or the local representative. When ordering new manuals it is essential to quote
the serial number shown on the rating plate.
1.4 Checking the relationship of the appliance and the manual
rev 2.0
04.08.2005
7
2 SAFETY
2.1 General warnings
Before installing the machine make sure that the used area is compatible with the
dimensions and the weight of the machine.
For the installation or removal of any machine part, the used lifting and handling
devices should be suitable to the weight and geometrical characteristics of the
part to be lifted or handled.
Only skilled and authorized personnel is allowed to start adjust or repair the machine.
Mechanical parts and electrical components inside the machine are protected by
totally enclosed panels fastened with screws.
Before cleaning and/or maintaining the machine and before removing any type of
protection, make sure that the general switch is on “OFF” position (O), in order to
turn off the power while the operator is working.
The power supply system of the purchaser should be provided with an automatic
release device above the machine main switch and with a suitable earthling system
complying with the accident prevention regulations.
In case of repairs to be done on the main switch or in themain switch area, turn
off the power of the electrical line.
Make sure that all safety devices (barriers, protections, carter, micro-switches,
etc.) have not been tampered and are perfectly working.
Do not remove the safety devices.
In order to avoid personal risks, only suitable tools should be used, in accordance
with the local safety regulations.
Do not tamper the electric and pneumatic plant or any other mechanism for any
reason.
Do not leave the machine unattended while it is working.
Wear safety clothing only, approved by the law in force.
In case of works to be done in a position that cannot be reached from the ground,
use safe ladders or lifting devices only, in conformity with the local safety regulations.
In case of repairs to be done near or under the machine, make sure that there are
no machine members that can start working and/or instable parts placed on the
machine or near themachine.
Do not use your hands instead of suitable tools to work on the machine.
8
rev 2.0
04.08.2005
Do not use your hands or other tools to stop any moving parts.
Do not use matches, lighters or fl ames near the machine.
YOUR BEST ATTENTION SHOULD BE PAID TO THE WARNING PLATES LOCATED ON THE MACHINE BEFORE DOING ANY WORK ON THE MACHINE
OR NEAR THE MACHINE.
The user is obliged to keep all the warning plates in legible conditions and, if
required, to change their position in order to make them fully visible to the operator.
Stop the machine before doing any repair work.
In case of malfunction of the machine or damages to its components, get in touch
with the maintenance engineer and do not try to repair the machine.
It is absolutely prohibited to use the machine for other purposes different from
those expressly indicated and documented.
The machine should be used always when and how provided by the good technique, in compliance with the EEC machine directive 89/392 and in compliance
with the regulations concerning health and safety of the workers, as indicated by
the local regulations or according to the EEC directive 89/ 391.
The manufacturer declines all responsibility for any injury or damage to persons
or things arising from inobservance of the safety regulations and the instructions
contained in this manual.
The machine is not suitable to be used in a place with explosion risk.
FOR ANY ELECTRIC/ELECTRONIC OR MECHANIC TAMPERING OF THE MACHINE BY THE USER OR IN CASE OF A NEGLIGENT USE OF THE MACHINE,
THE MANUFACTURER IS RELIEVED FROM ANY RESPONSIBILITY AND THE
USER WILL BE THE ONLY ONE RESPONSIBLE AGAINST THE COMPETENT
AUTHORITIES FOR THE ACCIDENT PREVENTION.
In case of fi re turn off the power by disconnecting the main power switch.Put out
the fi re by means of suitable fi re extinguishers.
2.2 Safety plates
The warning plates with explanatory symbols are to be found in all those areas
that may be dangerous for operators or engineers.
Anyone preparing to work on the machine should protect the warning plates with
the safety instructions. The non compliance with the instructions mentioned on the
safety plates will release the manufacturer from all responsibilities for damages
or injuries to persons or properties that may arise.
rev 2.0
04.08.2005
9
3.Functional description
3.1 IDENTIFICATION OF THE
COMPONENTS
1. Control panel
2. Cover
3. Cover opening handle (NOT in PL6/PC3)
4. Cover opening levers (PL6/PC3)
5. Food unloading door
6. Base (NOT in PL6/PC3)
7. Adjustable feet (NOT in PL6/PC3)
8. Filter (optional)
9. Water supply connection
10.Data plate
11.Electric cable
3.2 IDENTIFICATION OF THE
MACHINE
The serial number and identifi cation data of the
machine are punched on a plate (10) fastened
to the machine base.
IMPORTANT
The machine serial number should be always
mentioned in your request of technical assistance
or in your spare part orders.
kW
Volt
HzA
Type
Nr
Ali SpA
Viale Lombardia, 33
BOZZOLO (MN)
2
3
5
6
8
7
11
10
1
2
4
5
1
11
9
9
All models PL6/PC3 only
10
rev 2.0
04.08.2005
3.4 Safety device
The machine is provided with following safety systems:
1) All danger areas are protected by safety guards
with screws.
2) The machine is equipped with two sensors that
stop operation in case the upper lid (1) or the food
unloading door (2) are opened.
3) Low voltage (24V) electric controls.
4) Electrical system featuring IPX5 class protection.
1
1
1
2
3.3 APPLICATIONS, INTENDED USE
The PL / PV and PC versions are professional machines for modern cooking where 30 to 700 place
settings are needed.
PL version of machine has been designed to peel potatoes of all kinds, carrots and onions.
PV version of machine is a multipurpose one, it has been designed to peel potatoes of all kinds, carrots
and onions; to clean mussels. Special attachmentscan be added, to brush fruits and vegetables (pears,
apples, kiwis), to centrifuge vegetables (15-23-32 versions only).
PC version of machine has been designed to clean mussels.
Its versions can only be used for the above applications; any other use shall relieve the
manufacturer from all and any liability for injuries or damages and shall result in the forfeiture of any
warranty.
rev 2.0
04.08.2005
11
3.5 Operator areas
The operator, during loading and unloading of food,
can stay either in front or beside the machine. For a
complete description of allowed working positions,
check positions (O).
For maintenance works the engineer is allowed to
stay on the back of the machine (T).
3.6 CONTROL PANEL AND PILOT
LIGHTS
The machine is provided with following controls:
1. Green start button “ I “
When pressed, it starts the machine. [for PL and PC
models: the light (2) will switch on].
In PV models the machine will start at speed 1.
2. Working light (models PL and PC)
When push button (1) is pressed, it switches on; it
switches off when push button (3) is pressed.
3. Red stop push button “ 0 “
Pushing it stops the machine; the button can also
be used in cases of EMERGENCY.
4. Green 2nd speed start button “ II “
(PV model only)
Pushing it will start the machine at speed 2.
5. Timer
Rotating the timer will set the working time, as
soon as the preset time has expired the machine
will stop.
O
O
O
T
06
0,0#
0,0#
3
3
1
5
5
3
2
1
1
3
5
4
2
12
rev 2.0
04.08.2005
4.Operation instructions
4.1 - FUNCTIONING
4.1.1 Food preparation
For potatoes carrots, fruits and vegetables, mussels and seafood no special preparation is required,
whereas onions require the carrying out of the following operations.
Onions preparation:
Before introducing the onions in the machine it is necessary to remove the upper and lower parts as well
as the dry leaves around the onion in order to avoid clogging of the discharge.
The maximum load of onions shall be 2/3 of the machine’s operating load. After 2-3 working cycles
remove the disc as described in the maintenance paragraph and check that the discharge pipe is not
clogged.
rev 2.0
04.08.2005
13
4.1.2 Setting of the machine and start
Check that the machine is connected to the electric and
water supply circuits.
Check that the food unloading door (6) is correctly
closed.
Open the lid (7) operating the handle (8), while for model
PL 6/PC3 you should move the locks (9).
Insert the disc (10) to be used for the required food
processing checking that it has been correctly fastened
to the engine’s pin.
Insert the food to be processed, taking care not to exceed
the machine’s maximum load and close the lid (7).
Set the processing cycle duration with the timer (5).
For models PL 6/PC3 open the tap (11) for water input.
For PV models push the button for speed 1 “ I “ or 2^
“ II “ depending from the type of processing required,
while for the PL and PC models push the button “ I “.
As soon as the preset time has expired the machine
will stop.
For models PL 6/PC3 close the tap (11) , for the other
models the water fl ow will stop automatically as soon as
the preset time has expired.
11
7
9
6
10
8
7
6
14
rev 2.0
04.08.2005
Put a container under the food unloading door (6), open
the door and at the same time push the button “ “ (12)
until the food has been completely unloaded.
Warning for use of PV models
These models allow choice between two different
speeds, choice of speed depends on the type of processing and food.
Speed “ I “
It is used for mussels cleaning, vegetables centrifugation
(requires use of the optional basket), cleaning of fruits
(with the optional disc).
Speed “ II “
It is used to clean potatoes, carrots and onions.
Controls during functioning.
If the optional fi lter has been installed check that it discharges water correctly and clean it from the waste after
completion of some working cycles.
Machine Stop
• To stop the machine during processing push the (3) “ 0
“, button, the machine will stop immediately.
• Close water supply to the machine and the tap (11) for
PL6 model only.
EMERGENCY stop of the machine
• In an EMERGENCY, press the button (3), the machine
will clear all its functions.
• Remove the causes that created the emergency and
then restart the cycle.
12
3
12
3
6
6
rev 2.0
04.08.2005
15
4.1.3 Optional
The following optional are available on the different models:
Disc for Onions
Disc for cleaning and brushing fruits and vegetables
Disc for cleaning mussels and similar seafood
Centrifugation basket
Side abrasive
16
rev 2.0
04.08.2005
Installation of optional on the different models shall be made according to the following table:
Model Disc for carrots
and potatoes
Disc for
onions
Disc for fruits
and vegeta-
bles
Disc for mussels
and similar sea-
food
Centrifugation
basket
Side abra-
sive
PL 6 E YES NO NO NO NO
PL 10 E YES NO NO NO YES
PL 15 E YES NO NO NO YES
PL 23 E YES NO NO NO YES
PL 32 E NO NO NO NO YES
PV 10 E YES YES NO NO YES
PV 15 E YES YES YES YES YES
PV 23 E YES YES YES YES YES
PV 32 E YES YES YES YES YES
PC 3 NO NO NO E NO NO
PC 6 NO NO NO E NO NO
PC 8 NO NO NO E NO NO
E = EQUIPPED
4.1.4 INSTALLATION OF OPTIONAL ACCESSORIES
1
Installation of optional accessories on the different models
shall be carried out with the machine switched off.
Installation of centrifugation basket
• Open the upper lid as shown in the paragraph “MACHINE
STARTING”.
• Remove the peeling or cleaning disc from the machine.
• Insert the basket (1) in the machine as shown in the
picture.
Installation of side abrasive
IMPORTANT
This optional accessory shall be installed together with
the peeling disc and used only for peeling potatoes.
• Open the upper lid as shown in the paragraph “MACHINE
STARTING”.
• Insert the side abrasive (1) as shown in the picture paying
attention to insert the slots (2) obtained on the upper border
with the pins (3) on the machine.
3
2
1
rev 2.0
04.08.2005
17
6. After use
The maintenance works should be performed when the machine is stopped and the main switch is in
position “ 0 “ OFF.
6.1 Cleaning of the machine
Accurately clean the machine after each working
cycle and whenever there is the need to change type
of processing.
Do not use corrosive detergents or metal tools to
clean the machine.
DO NOT use high-pressure water jets or extremely
hot steam on the electric components (buttons, timer,
and so on.)
• Open the lid (1) operating the handle (2), for model
PL 6 you should also move the locks (3).
• Remove the peeling disc (4) and any optional tool
installed.
• Wash the inside of the chamber (5) and the discharge (6) with a low-pressure water jet.
3
1
5
6
4
2
1
18
rev 2.0
04.08.2005
6.2 Cleaning of electro magnetic valve
fi lter (except for Mod. PL6/PC3)
• Check that the water supply tap is correctly closed.
• Move to the back of the machine and unscrew the water
supply hose (1).
• Remove the fi lter of the electro magnetic valve (2) using
tongs and clean it with running water.
• Reassemble everything by carrying out the previous operations in reverse order, be especially careful to assemble
the gasket (3) correctly.
3
1
2
rev 2.0
04.08.2005
19
7. Installation
7.1 Unpacking
To remove the packing from the machine proceed as
follows:
• Cut the straps (1) that tie up the carton.
• Open the carton (2), by removing the metallic clips.
• Remove the cardboard packaging (2).
• Check if everything is complete.
• Check if the delivery is complying with the PACKING
LIST.
1
1
2
20
rev 2.0
04.08.2005
7.2 -MACHINE LIFTING
Lifting of the machine shall be carried out by two people seizing
it from the base and then lifting it.
ATTENTION
Use protection gloves for lifting the machine.
7.3 - ASSEMBLING THE FEET
For a greater ease of transportation the machines are shipped
with the adjustable feet not assembled.
For correct assembly act as follows:
• Lay the machine on the ground on one side, taking care to place
a piece of cardboard under the machine to avoid damaging it.
• Screw the feet (1) up until they reach the limit on the machine
base.
IMPORTANT
There are two types of feet: fl anged or rubber; the two types
shall be mounted staggered and in a
cross-like scheme as shown in the pictures.
'
Lifting
point
Lifting
point
1
1
1
rev 2.0
04.08.2005
21
7.4 - MACHINE INSTALLATION
7.4.1 Installation on bench (PL6/PC3 only)
DANGER
Make sure that the bolster is suitable to support the loads
reported in the “SPECIFICATIONS”
chapter, that it is smooth and uniform and that it is suffi ciently
high to grant proper use of the machine.
• Lift the machine (1) as reported in paragraph 3.1 and place
it on the bolster (2).
IMPORTANT
Make sure that there is a drainage well nearby in which water
containing waste shall be conveyed.
7.4.2 Installation on the fl oor
IMPORTANT
Make sure that there is a drainage well near or under the machine in which water containing waste shall be conveyed.
• Place the machine on the fl oor following thoroughly the recommendations reported in for they report the minimal distances
required for the operator or the technician to carry out correctly
any working or maintenance sequence.
• Adjust the feet (1)-(2) placing the machine on the level and
then fi xing it on the fl oor with the expansion screws using the
fl anged feet (2).
1
2
2
1
2
500 mm
500 mm
500 mm
Ø 6 mm
22
rev 2.0
04.08.2005
7.5 Water connections
Discharge
If the machine is placed above a drainage grid where water is
conveyed using a centralised fi lter the discharge is free. If there
is the need to connect it to a discharge pipe use the following
measures:
• Models PL/PV 6 ÷ 23 and PC 3 ÷ 8 = Ø 80 mm
• Model PL/PV32 Ø = 120 mm
ATTENTION
It is forbidden to discharge waste directly in the drainage, waste
water shall be conveyed through a centralised fi lter (1) if such
a fi lter is not available it is possible to purchase an (optional)
fi lter that for models PL and PV 10 - 32 and models PC 6 – 8
shall be positioned below, while for models PL 6/PC3 it must be
positioned behind.
Loading
The water supply pipe that moves from the choking shutter
and reaches the machine shall fl ow without obstructions and
without blocks.
PL 6/PC3
• Connect the supply pipe (2) to the hose-end fi tting (3) of the
machine fi xing them with the clamp (4).
PL/PV 10 ÷ 23 and PC 6 - 8
• Connect the 3/4” G water supply pipe (5) to the electromagnetic
valve (6) placing the gasket (7) in the middle.
IMPORTANT
After having carried out the water supply fi tting
open the water supply tap and check that there is
no water loss.
MM
MM
MM
6
7
5
1
4
1
3
2
rev 2.0
04.08.2005
23
7.6 ELECTRICAL CONNECTION
• The power feed line should be provided with a suitable
omnipolar DISCONNECTING SWITCH
(automatic thermomagnetic switch or differential) placed
before the control unit main switch, with
a minimum contact opening of 3 mm.
• The earthing system should comply with the local electric
regulations in force.
• The electric power cables should comply with the maximum
current required by the machine, so
that the total voltage drop at full charge will be less than
2%.
• The specifi cations of the electric power line should correspond to the specifi cations of the identifi cation plate and
to those mentioned in the technical specifi cations table that
can be consulted in the fi rst part of this booklet.
Before connecting the machine with the electric line, make
sure that the DISCONNECTING SWITCH is disconnected
(line not energized), therefore:
• Connect the power cable of the machine with the disconnecting switch placed above.
Control of a correct electrical connection
For the connection 230/400 V three phase, it is necessary
to check if the engine rotation is right, to do this proceed
as follows:
• Put main switch above the machine on “ON”.
• Set the timer (1) on a time of 10 ÷ 15 seconds.
• Push the (2) button taking it to and check, by means of
the upper lid and check that the peeling disc rotates in the
direction of the arrow (3) then stop the machine by pushing
the button (4) taking it to 0
If the rotation direction is contrary to the arrow direction,
proceed as follows:
DANGER
Before making any change in the electrical connection, make
sure that the DISCONNECTING
SWITCH is disconnected (line not energized),then:reverse
two of the three phase wires on the main
switch and check again the correct rotation.
06
0,0#
3
1
1
1
2
4
2
4
2
4
3
0,0#
24
rev 2.0
04.08.2005
7.7 FIRST START
• Set the main switch upstream of the machine to “ON”, open the
water supply; for model PL 6 open the tap (1).
• Set the timer (2).
• Press push button (3) , [in PL and PC models: the light (4) will
switch on]
• Start the empty machine and let it run for some minutes checking that rotation is smooth and without obstructions, check also
that water fl ows and that discharge is correct
• Stop the machine by pressing the button (5) 0 , [in PL
and PC models only the light (4) will now switch off].
3
5
1
3
2
2
5
4
3
3
5
2
rev 2.0
04.08.2005
25
8. Troubleshooting
The machine doesn’t start:
- check the electric connection.
- make sure that no foreign bodies are inside the machine and stop the rotation.
- check that both the food unloading door and the upper lid are correctly closed.
High percentage of waste and discard in potato cleaning :
- caused by deformed or unevenly sized potatoes
Disc for mussels and similar seafood; high percentage of discharge:
• caused by excessively soft shells
• amount of produced load is too high or too low.
Too little or too much water ( except for Model PL6/PC3):
- check that the electro-magnetic valve fi lter is not clogged.
rev 2.0
4.8.2005
39
Spareparts
40
rev 2.0
01.06.2005
TECHNICAL INFORMATION
Wiring diagrams
PC-PL
PV
Installation drawing
Technical Specifi cations
4HREEPHASEPOWERSUPPLY,,,
3INGLEPHASEPOWERSUPPLY,,
%ARTHINGTERMINAL
3ELFRESETTING
FUSE
4HREEPHASEMOTOR6+7567
3INGLEPHASEMOTOR6+767
SEESHEETFORCONNECTIONS
.#CONTACT
0USHBUTTON
PANEL
SEESHEETFOR
CONNECTIONS
VOLTAGEEXCHANGE
#/-FOR6ACVOLTAGE
#/-FOR6ACVOLTAGE
SSPEED
MOTORCONNECTION
PUSHBUTTONPANEL
RED
WHITE
PINK
GREEN
START
STOP
START
S VCONTACT
BROWN
GREY
RED
WHITE
INPUTCONNECTIONS
BLUE
WHITE
RED
YELLOW
TIMER
DOORMICRO
DOORMICRO
MOTORTHERMAL
LIDMICRO
MOTORTHERMAL
SELFRETENTION
BLOCK
LIDMICRO
MOTORTHERMAL
LIDMICRO
Wiring digram PC-PL Models
DRAIN
MICRO
6SOLENOID
VALVE
SPEED
MOTOR
SPEED
MOTOR
SPEED$AMLANDER
MOTOR
4IMER
-ULTIPURPOSE
BUTTONEMERGENCY
MUSHROOMBUTTON
,IDMICRO
,INE
#/-FOR6ACTHREEPHASEVOLTAGE
#/-FOR6ACTHREEPHASEVOLTAGE
VOLTAGEEXCHANGE
RED
GREEN
WHITE
BLACK
SPEED
STOP
SPEED
DER
KCALB
EHTIW
NEERG
Wiring diagram PV Mod.
H
1
08 Ø
E
H
L
L
1
P
P
1
H
1
H
2
E
H
H
3
P
P
1
L
2
L
1
L
PV10
PV23
PL6
PL15
PL32
PC6
PL23
PC3
PV32
PL10
H
PV15
H
1
H
2
H
3
E
L
L
1
L
2
P
P
1
1085
1105
1175
925
945
1015
10151175
630 555
9251085
1105 945
10151175
1175 1015
555630
1085 925
275
275
275
-
625
625
625
275
--
-275
275 625
625275
275 625
--
275 -
500
540
540
320
400
400
500540
230 350
320500
540 400
400540
540 500
350230
500 320
333
415
415
200
260
260
260516
333 -
200333
415 260
260415
516 260
-333
333 200
320
400
400
555
665
665
780500
490 535
555320
400 665
665400
500 780
535490
320 555
PC8
1105 945
275 625
540 400
415 260
400 665
Installation drawing
VP
LASREVINU
SRELEEP
LP
- SEOTATOP
STORRAC
SRELEEP
CP
HSIFLLEHS
GNINAELC
SENIHCAM
.DOM
LOAD CAPACITY
Kg
OUTPUT
Kg/h
N. OF
SPEED/rpm
NO./rpm
RATING
VOLTAGE
Volts/Hz/~
MAX. POWER
KW
WATER
CONNECTION
DRAINING PIPE
ø mm
NET WEIGHT
Kg
01/VP
51/VP
32/VP
23/VP
6/LP
01/LP
51/LP
32/LP
23/LP
3/CP
6/CP
8/CP
01
51
32
23
6
01
51
32
23
2 w 3
4 w 6
8 w 01
*052
*053
*054
*056
*021
*052
*053
*054
*056
**54
**06
**051
042-022/2
053-571/2
053-571/2
052-521/2
024/1
024/1
053/1
053/1
052/1
002/1
002/1
061/1
3/05/032
3/05/004
3,0 - 22,0
57,0 - 6,0
57,0 - 6,0
82,1 - 20,1
73,0
73,0
57,0
57,0
1,1
52,0
522,0
522,0
33,0
54,0
54,0
SAG 4/3
SAG 4/3
SAG 4/3
SAG 4/3
21 ø
SAG 4/3
SAG 4/3
SAG 4/3
SAG 4/3
SAG 4/3
SAG 4/3
SAG 4/3
08
08
08
021
08
08
08
08
021
08
08
08
93
05
15
86
92
63
84
94
66
03
93
25
3/05/032
3/05/004
3/05/032
3/05/004
3/05/032
3/05/004
1/05/032
3/06-05/032
3/06-05/004
1/05/032
3/06-05/032
3/06-05/004
1/05/032
3/06-05/032
3/06-05/004
1/05/032
3/06-05/032
3/06-05/004
1/05/032
3/06-05/032
3/06-05/004
1/05/032
3/06-05/032
3/06-05/004
1/05/032
3/06-05/032
3/06-05/004
1/05/032
3/06-05/032
3/06-05/004
52,0
522,0
522,0
SEOTATOP = *
STORRAC = **
nim/l 41 = NOITPMUSNOC RETAW
Loading...