TAHI SATINJET HANDSET AND HOSE/
HANDSET AND HOSE WITH WALL OUTLET
BRACKET
INSTALLATION GUIDE
TECHNICAL SPECIFICATIONS
Operating Pressure:
Min 1.5 bar, Max 5 bar.
If supply exceeds 5 bar, a pressure
limiting valve must be installed.
Operating Temperature:
Max 70°C.
Notes:
After installation all connections ●
must be checked for leaks.
All installations must be carried ●
out in compliance with relevant
water regulations.
Methven warrants this product against manufacturing defects and that it is suitable for use
under the operating conditions specified in this instruction sheet.
For your warranty please refer to www.methven.com or call Customer Service
New Zealand
0800 804 222
Australia
1300 638 483
UK
0800 195 1602
Issue A435022
HANDSET AND HOSE
Filter Washer
HANDSET AND HOSE WITH
WALL OUTLET BRACKET
1.
Apply plumbing tape to pipe. Screw wall outlet
bracket onto ½" nipple pipe ensuring it ends up in
the correct position.
2.
CLEANING
Water contains lime which remains on the surface
after the water has evaporated. These lime
deposits can be prevented from forming by wiping
immediately after use.
Do not use any
sharp objects to
clean nozzles.
To clean the chrome-plated surfaces use a soft
cloth, soap and warm water. Never use cleaning
agents that contain a corrosive acid or a scouring
additive.
Clean filter washer
periodically.
Remove existing hose. Insert the filter washer into
the new hose before screwing to the handset.
Filter Washer
Insert the filter washer into the new hose before
screwing to the handset.
Loading...