METEC ELECTRONICS NOXPRSB, NOXPRSW User Manual
AVGO 35" 2.1 Channel Bluetooth Soundbar
with Wireless Subwoofer
NOXPR
,
...........................................................................
FCC Warning
note
INPORTANT Safety Instruc�ons
1. Read these instructions – All the safety and operating instructions should be read before
this product is operated.
2. Keep these instructions – The safety and operating instructions should be retained for
future reference.
3. Heed all warnings – All warnings on the appliance and in the operating instructions should
be adhered to.
4. Follow all instructions – All operating and use instructions should be followed.
5. Do not use this apparatus near water – The appliance should not be used near water or
moisture – for example, in a wet basement or near a swimming pool, and the like.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacture’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has
two blades with one wider than the other. A grounding plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs,
convenience receptacles, and at the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart or rack is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13. Unplug the apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has
been damaged in any way, such as power supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15. CAUTION: These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than that contained
in the operating instructions unless you are qualified to do so.
INPUT
Made In China
HDMI FUNCTION(ARC Version)
5
HDMI(ARC)
1
2
FCC Warning
, the bar will turn up with red LED color.
Note: Adapter difference, 24V 2.5A for subwoofer, 20V 2.4A for bar only.
5
POWER : Press this button to turn to Standby mode.
INPUT : Press this button to USB/AUX/Optical/HDMI/Bluetooth mode.
the
In the Optical/HDMI(ARC) mode, take one Optical/HDMI cable and plug one side into Optical/HDMI
port and the other side into TV port to connect.
5.
Press INPUT key on remote controller, the unit enters into Bluetooth playback, LED display of bar front
panel will flash in red color. Search for “NOXPR” on BT device and pair the devices with the speaker
system, then LED display of bar front panel will keep lighting up in red color after connected successfully.
a .
for 3-5seconds
P the
an
“This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.”
- Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.”
- “NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
■
Reorient or relocate the receiving antenna.
■
Increase the separation between the equipment and receiver.
■
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.”
:
:
:Press this button to USB/AUX/Optical
HDMI/Bluetooth mode.
:Begin to play or pause the USB/Bluetooth
Optical/HDMI mode.
3
: Begin to play or pause the USB/Bluetooth/Optical/HDMI mode.
TRE+,- : Increase treble or reduce treble
BASS+,- : Increase bass or reduce bass
:To mute the sound
:
4
Ratio
Seperation
THD Distortion
NOXPR
100
75
>45dB
<0.5% at 1W output @1KHz
5
FCC Radiation Exposure Statement
This equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your
body.
5
Loading...