Metalux IB519016EN Installation Instructions

INS #

Brand Logo
reversed out of
black

INS #

IB519016EN

Installation Instructions – FRLED Lens and Clip Assembly
Instructions d’installation – Assemblage lentille et bride FRLED
Instrucciones de instalación – Montaje de la lente FRLED y del

gancho

INSTALLATION

Door Assembly

FRLED Lens And Clip Assembly

1. Bend the lens slightly inwards and place both horizontal
edges in “S” bend feature of the reflector as shown in
(Figure 2. & 3.)

Lens

Figure 1.

S Bend

Figure 2. & 3. Section view

Reflector

Lens

COOPER LIGHTING SOLUTIONS IB519016EN Installation instructions

Installation Instructions – FRLED Lens and Clip Assembly

2. Push clip until the flange snaps in position with lens
as shown in Figures 5 & 6. Clips should be positioned
within 2” of end plates.

Lens Clip

Lens

Door Assembly

Figure 4.

Ensure Lens
is Seated in
S-Bend
Fully Prior to
Installing Clips

Figure 5. & 6.

Ensure Lens is
Seated in S-Bend
Fully Prior to
Installing Clips

Figure 7. & 8.

Reflector

Section view

Section view

2

COOPER LIGHTING SOLUTIONS

IB519016EN Instructions d’installation

Instructions d’installation – Assemblage lentille et bride FRLED

INSTALLATION

Assemblage lentille et bride FRLED

1. Plier légèrement la lentille vers l’intérieur et insérer les
deux bords horizontaux dans le pli en forme de «S» du
réflecteur, comme illustré aux (Figures 2 et 3.)

Pli en «S»

Réflecteur

Lentille

Assemblage de porte

Lentille

Figure 1.

Figure 2. et 3. Vue de côté

Assemblage
de porte

Figure 4.

3