How it Works
Metal Sales
Loading...
Secondary Framing
User Manual
53 pgs1.31 Mb0

Metal Sales Secondary Framing User Manual

SECONDARY FRAMING Table of ConTenTs
Topic Page No. Topic Page No.
Purlin and Girt Attachment
Flush and Girt Attachment ..........................PSF-2
Continuous Girt Attachment........................PSF-3
Standard Proles
Standard Cees and Zees............................PSF-4
LGSI Zees ..................................................PSF-4
Eave Struts .................................................PSF-5
Eave Strut Angle Specier Chart ................PSF-5
Channels ....................................................PSF-6
Hip/Valley Plates .........................................PSF-6
Hip Valley Specier Chart ...........................PSF-6
Base Angles................................................PSF-7
Flashing and Accessory Proles
Self Storage Building Flashings..................PSF-7
SS26 8" Corner Cover ................................PSF-7
SS26 8" Sculptured Corner Cover ..............PSF-7
SS26 12" Sculptured Corner Cover ............PSF-7
SS26 16" Jamb Cover ................................PSF-7
SS26 24" Jamb Cover ................................PSF-7
Self Storage Building Accessories ..............PSF-8
Hat Sections ...............................................PSF-8
Channels ....................................................PSF-8
Sub-Girts ....................................................PSF-8
U-Channel ..................................................PSF-8
Low Eave Strut Self Storage ......................PSF-8
High Eave Strut Self Storage......................PSF-8
Base Clip (Retro-Fit) ...................................PSF-8
Angle Clip ...................................................PSF-8
Flo-Loc Grips ..............................................PSF-8
Eyebolt with Nut..........................................PSF-8
Hill Side Washer and Flat Washer ..............PSF-8
Bolt and Nut Assembly ...............................PSF-8
Banding ......................................................PSF-8
Strand .........................................................PSF-8
Punch Information
Pattern #1 ...................................................PSF-9
Pattern #2 ...................................................PSF-9
Pattern #3 ...................................................PSF-9
Pattern #A .................................................PSF-10
Pattern #B.................................................PSF-10
Pattern #C ................................................PSF-10
Pattern #D ................................................PSF-11
Pattern #E.................................................PSF-11
Pattern #F ................................................. PSF-11
Pattern #G ................................................PSF-12
Pattern #H ................................................PSF-12
Pattern #J .................................................PSF-12
Pattern #S 3 C ..........................................PSF-13
Pattern #S 3 D ..........................................PSF-13
Pattern #S 4..............................................PSF-13
Pattern #S 5..............................................PSF-13
Sellersburg, Indiana..................................PSF-14
Denver, Colorado......................................PSF-15
Woodland, California ................................PSF-17
Product Information
General Information ..................................PSF-18
Zees..........................................................PSF-21
Cees .........................................................PSF-22
Eave Struts ...............................................PSF-23
Hat Sections .............................................PSF-24
1.5" Channels ...........................................PSF-25
Sub-Girts ..................................................PSF-25
Allowable Uniform Loads .................... PSF-29-46
LGSI Information ......................................PSF-47
LGSI Zee Information ...............................PSF-48
LGSI Zee Lap Information .................. PSF-49-52
Notes
Notes ........................................................PSF-53
General Information
Material
Standard gauges: 12, 14 and 16 gauge. Available in either Red Oxide, MS Gray or Galvanized. Galvanized members meet ASTM A 653 with minimum yield of 55 ksi, minimum tensile of 70 ksi and G90. Red Oxide members meet ASTM A 1011 with minimum yield of 55 ksi, minimum tensile of 70 ksi.
Red Oxide nish performance: Pencil Hardness: HB - H Impact Resistance: 160 in/lb Dry Film Thickness: 0.45 to 0.55 mils
Lead Content: 0%
T-Bends: 4T
Length
Cees, Zees, and Eave Struts are ordered cut-to-length. They can be ordered cut to 1/8 inch. For lengths under 7'-0" for Zees and 6'-0" for Cees, members can be press broken at addtional costs (Please consult Metal Sales). Channels, Hip/ Valley Plates, Base Angles, and Hat Sections are available in standard 20'-0" lengths.
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Ofce) • www.metalsales.us.com
PSF-1
SECONDARY FRAMING
Purlin and GirT aTTaChmenT
The drawing below represents girts attached ush with the framing utilizing a clip for attachment to the column. Purlins are shown with typical lap condition directly bolted to the beam.
Purlin bolted to beam
Beam
High strength bolt
1
Column
/2"
7'-6"
Girt
Anchor bolt
Eave strut
Clip
Diagonal bracing
Foundation
PSF-2
Base angle
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Ofce) • www.metalsales.us.com
SECONDARY FRAMING
The drawing below represents girts outside the column attached with bolts direct to the column. Purlins are shown with typical lap condition bolted to the beam with a clip.
Purlin and GirT aTTaChmenT (ConT.)
Purlin bolted to beam with clip
High strength bolt
Fin head bolt
Tapered column
Girt
Beam
Eave strut
7'-6"
Anchor bolt
Bracing
Foundation
Base angle
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Ofce) • www.metalsales.us.com
PSF-3
SECONDARY FRAMING
Profiles
STANDARD CEES AND ZEES
Members can be manufactured to the nearest 1/8" in length from 6'-0" to 45'-0" (for Cees) and 7'-0" to 45'-0" (for Zees).
For lengths other than listed, please inquire.
CEE
B1
WEB
B2
B1
ZEE
WEB
B2
(Symmetrical Flange)
ACTUAL SIZE
Web x B1 x B2
4" x 21/2" x 21/2"
6" x 21/2" x 21/2"
6" x 21/2" x 21/2"
8" x 21/2" x 21/2"
1
/2" x 21/2"
8" x 2
1
8" x 3
/2" x 31/2"
9" x 3" x 3"
1
9" x 3
/2" x 31/2"
1
10" x 2
10" x 3
12" x 21/2" x 21/2"
12" x 31/2" x 31/2"
/2" x 21/2"
10" x 3" x 3"
1
/2" x 31/2"
10" x 4" x 4"
12" x 3" x 3"
GAUGE
12 14 16
                               
FINISH
Red Oxide Red Oxide
Galvanized
Red Oxide
Galvanized
Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide
MANUFACTURED
LOCATION
Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland
Sellersburg / Jacksonville / Woodland
Sellersburg / Longmont / Jacksonville / Woodland
Sellersburg / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland
Sellersburg / Jacksonville / Woodland
LGSI ZEES
Members can be manufactured to the nearest 1/8" in length from 7'-0" to 45'-0". For lengths under 7'-0" or over 45'-0", please inquire.
B1
LGSI ZEE
WEB
B2
(Unsymmetrical Flange)
ACTUAL SIZE
Web x B1 x B2
4" x 21/8" x 23/8"
6" x 21/8" x 23/8"
6" x 21/8" x 23/8"
8" x 21/8" x 23/8"
1
/8" x 23/8"
8" x 2
1
8" x 3
/8" x 33/8"
5
/8" x 27/8"
9" x 2
1
9" x 3
/8" x 33/8"
1
10" x 2
10" x 2
10" x 3
10" x 3
12" x 21/8" x 23/8"
12" x 25/8" x 27/8"
12" x 31/8" x 33/8"
/8" x 23/8"
5
/8" x 27/8"
1
/8" x 33/8"
5
/8" x 37/8"
GAUGE
12 14 16
                            
FINISH
Red Oxide Red Oxide
Galvanized
Red Oxide
Galvanized
Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide
MANUFACTURED
LOCATION
Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland
Sellersburg / Jacksonville / Woodland
PSF-4
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Ofce) • www.metalsales.us.com
SECONDARY FRAMING
EAVE STRUTS
Profiles (ConT.)
B1
B1
B1
B1
1:12
4:12 slope
WEB
B2
Low Eave Single Slope
WEB
High Eave Single Slope
B2
WEB
B2
Low Eave Double Slope
WEB
B2
High Eave Double Slope
WEB
B2
Universal
When ordering please specify type of Eave Strut; whether they are single slope, double slope, low eave, high eave, or universal. Slopes up to 4:12 available. Please specify slope when ordering (refer to Eave Strut Angle Specier Chart below). Members can be manufactured to the nearest 1/8" in length from 6'-0" to 39'-0" (for lengths under 6'-0" or over 39'-0", please
inquire).
ACTUAL SIZE
Web x B1 x B2
6" x 31/2" x 31/2"
6" x 31/2" x 31/2"
6" x 31/2" x 31/2"
6" x 31/2" x 31/2"
8" x 21/2" x 21/2"
1
8" x 2
/2" x 21/2"
1
/2" x 31/2"
8" x 3
8" x 31/2" x 31/2"
1
/2" x 31/2"
8" x 3
8" x 5" x 5"
8" x 5" x 5"
8" x 5" x 5"
1
9" x 3
/2" x 31/2"
9" x 31/2" x 31/2"
9" x 4" x 4"
9" x 4" x 4"
10" x 4" x 4"
10" x 4" x 4"
12" x 31/2" x 31/2"
12" x 31/2" x 31/2"
GAUGE
12 14
                                                 
FINISH
Red Oxide
Red Oxide Galvanized Galvanized Galvanized Galvanized
Red Oxide
Red Oxide
Red Oxide
Red Oxide
Red Oxide
Red Oxide
Red Oxide
Red Oxide
TYPE
Single Slope
Double Slope
Single Slope Double Slope Single Slope*
Double Slope* Single Slope**
Double Slope
Universal
Single Slope Double Slope
Universal
Single Slope Double Slope
Single Slope Double Slope
Single Slope Double Slope
Single Slope Double Slope
MANUFACTURED
LOCATION
Sellersburg / Longmont / Jacksonville Sellersburg / Longmont / Jacksonville Sellersburg / Longmont / Jacksonville Sellersburg / Longmont / Jacksonville Sellersburg / Longmont / Jacksonville Sellersburg / Longmont / Jacksonville Sellersburg / Longmont / Jacksonville Sellersburg / Longmont / Jacksonville
Sellersburg / Jacksonville Sellersburg / Longmont / Jacksonville Sellersburg / Longmont / Jacksonville Sellersburg / Longmont / Jacksonville
Sellersburg / Jacksonville
Sellersburg / Jacksonville Sellersburg / Longmont / JacksonvilleRed Oxide Sellersburg / Longmont / JacksonvilleRed Oxide Sellersburg / Longmont / JacksonvilleRed Oxide Sellersburg / Longmont / JacksonvilleRed Oxide
Sellersburg / JacksonvilleRed Oxide
Sellersburg / JacksonvilleRed Oxide
*Punching in ange not available in this size member. **High Eave Single Slope and any Single Slope greater than 2:12 is not available at Longmont, CO.
EAVE STRUT ANGLE SPECIFIER CHART
This chart should be used to determine the required specied angle when considering eave struts.
PROFILE
A
B
A B
1:12
95° 99° 104° 108°
A
90°
B
85°
A
90°
B
2:12 3:12 4:12
90°
81°
90°
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
90°
76°
90°
800.406.7387 (Corporate Ofce) • www.metalsales.us.com
90°
71°
90°
PROFILE
A
B
A
B
1:12 2:12 3:12 4:12
95° 99° 104° 108°
A
85°
B
85°
A
95°
B
81° 76°
81°
99°
76°
104°
71°
71°
108°
PSF-5
SECONDARY FRAMING
Profiles (ConT.)
CHANNELS
WEB
Standard lengths are 20'-0". for lengths other than 20'-0", please inquire.
ACTUAL SIZE
Web x B1 x B2
4" x 3" x 3"
6" x 2" x 2"
6" x 3" x 3"
6" x 3" x 3"
6" x 3" x 3"
8" x 2" x 2"
8" x 2" x 2"
8" x 3" x 3"
8" x 3" x 3"
8" x 3" x 3"
8" x 4" x 4"
9" x 21/2" x 21/2"
9" x 21/2" x 21/2"
1
9" x 3
/2" x 31/2"
9" x 4" x 4"
10" x 2" x 2"
10" x 2" x 2"
10" x 3" x 3"
1
10" x 3
12" x 31/2" x 31/2"
/2" x 31/2"
10" x 4" x 4"
12" x 2" x 2"
12" x 2" x 2"
12" x 4" x 4"
GAUGE
12 14 16
                                                     
STANDARD
LENGTH
20'-0" 20'-0" 20'-0"
20'-0" 20'-0" 20'-0" 20'-0" 20'-0" 20'-0" 20'-0" 20'-0" 20'-0" 20'-0" 20'-0" 20'-0" 20'-0"
Red Oxide
Galvanized
Red Oxide
Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide Red Oxide
B1
B2
FINISH
MANUFACTURED
LOCATION
Sellersburg / Longmont / Jacksonville / Woodland Sellersburg / Longmont / Jacksonville / Woodland
Longmont / Jacksonville / Woodland
Sellersburg / Longmont / Jacksonville / WoodlandRed Oxide20'-0" Sellersburg / Longmont / Jacksonville / WoodlandGalvanized20'-0"
Sellersburg / Longmont / WoodlandRed Oxide20'-0"
Sellersburg / WoodlandRed Oxide20'-0"
Longmont / Jacksonville / WoodlandRed Oxide20'-0" Sellersburg / Longmont / Jacksonville / WoodlandRed Oxide20'-0" Sellersburg / Longmont / Jacksonville / WoodlandGalvanized20'-0" Sellersburg / Longmont / Jacksonville / WoodlandRed Oxide20'-0"
Sellersburg / Longmont / Woodland
Sellersburg / Woodland Sellersburg / Jacksonville / Woodland Sellersburg / Jacksonville / Woodland
Sellersburg / Longmont / Woodland
Sellersburg / Woodland
Sellersburg / Longmont / Jacksonville / Woodland
Sellersburg / Jacksonville / Woodland Sellersburg / Jacksonville / Woodland
Sellersburg / Longmont / Woodland
Sellersburg / Woodland Sellersburg / Jacksonville / Woodland Sellersburg / Jacksonville / Woodland
HIP/VALLEY PLATES
ACTUAL SIZE GAUGE
12 14 16
7" x 7"
7" x 7"
91/2" x 91/2"
10" x 10"
HIP/VALLEY ANGLE SPECIFIER CHART
PROFILE/FLASHING
HIP
PSF-6
         
VALLEY
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
STANDARD
LENGTH
20'-0" 20'-0" 20'-0" 20'-0"
1:12 2:12 3:12 4:12 5:12 6:12 7:12 8:12 9:12 10:12 11:12 12:12
173o167o160o154o148o143o138o134o130o126o123o120
800.406.7387 (Corporate Ofce) • www.metalsales.us.com
FINISH
Red Oxide
Galvanized
Red Oxide Red Oxide
MANUFACTURED
LOCATION
Sellersburg / Longmont / Jacksonville Sellersburg / Longmont / Jacksonville Sellersburg / Longmont / Jacksonville
Sellersburg / Jacksonville
o
SECONDARY FRAMING
BASE ANGLES
Profiles (ConT.)
2"
3"
4"
4"
2"
2"
2"
ACTUAL SIZE GAUGE
STANDARD
14
2" x 2"
2" x 3"
2" x 3"
2" x 4"
6" x 4"
    
SECONDARY FRAMING
LENGTH
20'-0" 20'-0" 20'-0" 20'-0" Sellersburg / Longmont / Jacksonville / WoodlandRed Oxide 20'-0"
self sToraGe buildinG flashinG Profiles
FINISH
Red Oxide Red Oxide
Galvanized
MANUFACTURED
Sellersburg / Longmont / Jacksonville / Woodland
Longmont / Jacksonville / Woodland Longmont / Jacksonville / Woodland
Jacksonville / WoodlandRed Oxide
SS26 8" CORNER COVER
COVER CORNER COVER
17/8"
41/8"
Length 8'-0", 8'-8", 7'-2"
C
7
/8"
1
/8"
4
7
/8"
1
/8"
8
C
Length 7'-2"
6"
LOCATION
SS26 8"SCULPTUREDSS26 4" HEAD/JAMB
7
/8"
1
/8"
5
1
1
7
2
/8"
/8"
Length 7'-0"
7
/8"
2
120°
C
3
/8"
2
1
1
/4"
SS26 12" CORNER
COVER
7
/8"
1
4
/8"
1
12
/8"
Length 7'-2" Length 7'-0" Length 7'-2"
SS26 16" SCULPTURED
JAMB COVER
7
/8"
1
5
/8"
1
1
/8"
5"
5"
Length 7'-0"
120°
5"
SS26 12" SCULPTURED
SS26 16" JAMB COVER
CORNER COVER
7
/8"
1
/8"
5
1
7
/8"
C
1
47/8"
/8"
7
/8"
2
120°
3
C
3
2
/8"
1
/4"
SS26 24" JAMB COVER
7
/8"
1
/8"
4
161/8"
SS26 24" SCULPTURED
C
JAMB COVER
7
7
/8"
C
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
1
/8"
4
1
/8"
24
Length 7'-2"
800.406.7387 (Corporate Ofce) • www.metalsales.us.com
C
/8"
1
5
/8"
1
1
/8"
1
/2"
7
8"
Length 7'-0"
120°
7
C
1
/2"
PSF-7
SECONDARY FRAMING
15/8"
1
/32" R (Typ.)
1
/4"
22 Ga., Galvanized
2 3/4"
Length 20'-0"
11/2"
self sToraGe buildinG aCCessory Profiles
1
1
/4" HAT SECTION
3
/32"
15
/16"
16 Ga., Galvanized
11/2"
11/4"
33/8"
Length 20'-0"
11/2" CHANNEL11/2" HAT SECTION
1
/8" R (Typ.)
Length 20'-0"
18 Ga., Galvanized
11/2"
1
/4"
17/16"
1" SUB-GIRT
1"
99.5°
U-CHANNEL
1
3
/4"
/16" R (Typ.)
HIGH EAVE STRUT
SELF STORAGE
31/2"
X*
7
/8"
3"
3"
16" or 24"
4"
41/8"
18 Ga., Galvanized or 22Ga., Galvanized
Length 20'-0"
LOW EAVE STRUT
BASE CLIP (RETRO-FIT) ANGLE CLIP
Length 16", 24"
14 Ga., Red Oxide or 16Ga., Red Oxide
SELF STORAGE
31/2"
X*
4"
14 Ga., Red Oxide or 16Ga., Red Oxide
5"
3"
16 Ga., Red Oxide
6"
2"
1
/2"
3
FLO-LOC GRIPS EYEBOLT WITH NUT HILLSIDE WASHER &
FLAT WASHER
4"
BOLT & NUT ASSEMBLY
1
/2" x 11/4" A307 Bolt
1
/2" x 1" Fin Head Bolt
PSF-8
Length 0'-9"Length 191/2", 21", 26"
Available in 1/2", 5/8", 3/4" center radius.
BANDING STRAND
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Ofce) • www.metalsales.us.com
SECONDARY FRAMING
Cee and Zee PunCh PaTTerns
PATTERN #1
1
/2"
1
4"
1
/4"
1
Flange
1
3
/2"
PATTERN #2
2"
FOR STANDARD ZEES ONLY
1
/2" Bay Width
5
/8" x 3/4" Vertical Slots
5
/8" Round Holes Shown (Sellersburg, IN) or (Jacksonville, FL)
5
/8" x 3/4" Horizontal Slots (Longmont, CO only)
Bottom of Purlin
5
1
1
/2"
/8" x 3/4" Vertical Slots Shown (Sellersburg, IN) or (Jacksonville, FL)
5
/8" x 3/4" Horizontal Slots (Longmont, CO only)
FOR STANDARD ZEES ONLY
1
/2" Bay Width
7"
C
L
5
/8" Round Holes
1
1
/2"
1
1
/2"
Punch pattern
is similar on
both ends.
Standard punch patterns not available on 4" web members.
2'-4"
C
L
1
/2"
1
4"
11/4"
Flange
1
/2"
1
PATTERN #3
1
/2"
1
4"
1
/4"
1
Flange
1'-2" 1'-1/2"
1
1'-1/2"
1'-2"
/2"
1
5
/8" Round Holes Shown (Sellersburg, IN only)
FOR STANDARD ZEES ONLY
1'-9"
5
5
/8" x 3/4" Vertical Slots
/8" Round Holes
Bottom of Purlin
5
/8" x 3/4" Vertical Slots Shown (Sellersburg, IN) or (Jacksonville, FL)
5
/8" x 3/4" Horizontal Slots (Longmont, CO only)
Standard punch patterns not available on 4" web members.
1
/2" Bay Width
1
/2"
1'-7
5
/8" Round Holes
5
/8" x 3/4" Vertical Slots
Bottom of Purlin
11/2"
1
1
/2"
11/2"
Punch pattern
is similar on
both ends.
3'-6"
C
L
11/2"
Punch pattern
is similar on
both ends.
1'-7
1'-9"
1
/2"
1
/2"
1
5
/8" x 3/4" Vertical Slots Shown (Sellersburg, IN) or (Jacksonville, FL)
5
/8" x 3/4" Horizontal Slots (Longmont, CO only)
Standard punch patterns not available on 4" web members.
5
/8" Round Holes Shown (Sellersburg, IN) or (Jacksonville, FL)
5
/8" x 3/4" Horizontal Slots (Longmont, CO only)
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Ofce) • www.metalsales.us.com
PSF-9
SECONDARY FRAMING
Cee and Zee PunCh PaTTerns
PATTERN #A
13/4"
4"
No ange punching for pattern #A.
1'
2"
2"
2'-4"
PATTERN #B
3
/4"
1
1'
2"
For Standard and LGSI Zees
1' 1'
2"
2"
2"
If LGSI, Wide Flange Indicator
For Standard and LGSI Zees
2"
1'
2"
1'
2"
4"
For 2'-31/2" or 4'-31/2" Laps
C
11/2"
1
1
/2"
L
1
1
Punch pattern
C
L
11/2"
/2"
is similar on
both ends.
1'
5
/8" x 3/4" Vertical Slots
5
4"
1'
/8" Round Holes
Standard punch patterns not available on 4" web members.
1
For 2'-3
1'
1'
/2", 4'-31/2", or 6'-31/2" Laps
4"
4"
2"
3
/4"
3
No ange punching for pattern #B.
PATTERN #C
3
1
/4"
1
1
/4"
1
Flange
/4"
4"
1
1
/4"
1"
If LGSI, Wide Flange Indicator
5
/8" x 3/4" Vertical Slots Shown (Sellersburg, IN only)
5
3"
/8" x 3/4" Horizontal Slots (Longmont, CO only)
If LGSI, Wide Flange Indicator
2'-4"
4"
5
/8" Round Holes
5
/8" x 3/4" Vertical Slots
4"4"
Standard punch patterns not available on 4" web members.
For Standard and LGSI Cees and Zees only
1
/2" Bay Width
5
/8" Round Holes
5
/8" Round Holes Shown (Sellersburg, IN only) or 5/8" x 3/4" Horizontal Slots (Longmont, CO only)
Bottom of Purlin
11/2"
Punch pattern
is similar on
both ends.
1
/2" Gap
No Lap No Lap
C
L
11/2"
Punch pattern
is similar on
both ends.
PSF-10
Standard punch patterns not available on 4" web members.
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Ofce) • www.metalsales.us.com
SECONDARY FRAMING
Cee and Zee PunCh PaTTerns
PATTERN #D
3
1
/4"
4"
3
/4"
1
Flange
1
/4"
2
PATTERN #E
For LGSI Zees only.
1'
4"
2"
If LGSI, Wide Flange Indicator
1
1
/2"
1
1
/2"
3
1'-1
/4"
3
1
/4"
1'
4"
1'
2"
2"
2"
1
1
/2"11/2"
11/2"11/2"
1'
5
/8" Round Holes Shown (Sellersburg, IN) or (Jacksonville, FL)
5
/8" x 3/4" Horizontal Slots (Longmont, CO only)
For LGSI Zees only.
1'
2"
2"
2"
2"
1'
1
/2"
1
1
/2"
1
1'
1' 1'
2"
4"
2"
1'
4"4"4"
5
/8" x 3/4" Vertical Slots Shown (Sellersburg, IN) or (Jacksonville, FL)
1
5
1
/2"
/8" x 3/4" Horizontal Slots (Longmont, CO only)
For 2'-31/2", 4'-31/2", or 6'-31/2" Laps
2"
2"
For 2'-31/2" or 4'-31/2" Laps
5
/8" Round Holes
5
/8" x 3/4" Vertical Slots
Bottom of Purlin
Standard punch patterns not available on 4" web members.
1'
4"
4"
1'
4"
11/2"
11/2"
C
L
C
L
11/2"
11/2"
Punch pattern
is similar on
both ends.
4"
1
2
/4"
1'-1
3
/4" from web (Sellersburg, IN) or (Jacksonville, FL)
1 11/4" from web (Longmont, CO only)
PATTERN #F
13/4"
4"
13/4" from web (Sellersburg, IN) or (Jacksonville, FL) 11/4" from web (Longmont, CO only)
1'
If LGSI, Wide Flange Indicator
1
1
3
/4"
1'-1
If LGSI, Wide Flange Indicator
1
1
1
/2"
1
1
/2"
3
/4"
1
1
/2" 11/2"
1
1
1
/2"
1'
For LGSI or Standard Zees only.
1'
2"
2"
5
/8" x 3/4" Vertical Slots Shown (Sellersburg, IN) or (Jacksonville, FL)
/2"
1
1
/2"
5
/8" x 3/4" Horizontal Slots (Longmont, CO only)
5
/8" Round Holes Shown (Sellersburg, IN) or (Jacksonville, FL)
5
/8" x 3/4" Horizontal Slots (Longmont, CO only)
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
5
/2"
/8" x 3/4" Vertical Slots
Bottom of Purlin
5
1
1
/2"
/8" x 3/4" Vertical Slots Shown (Sellersburg, IN) or (Jacksonville, FL)
1
1
/2"
5/8" x 3/4" Horizontal Slots (Longmont, CO only)
5
/8" Round Holes
1'
5
/8" Round Holes Shown (Sellersburg, IN) or (Jacksonville, FL)
5
/8" x 3/4" Horizontal Slots (Longmont, CO only)
Standard punch patterns not available on 4" web members.
1
/2" Bay Width
1'-4"
5
/8" Round Holes
5
/8" x 3/4" Vertical Slots
Bottom of Purlin
Standard punch patterns not available on 4" web members.
800.406.7387 (Corporate Ofce) • www.metalsales.us.com
11/2"
C
L
1
/2"
1
Punch pattern
Punch pattern
is similar on
both ends.
2'-31/2"
is similar on
both ends.
PSF-11
SECONDARY FRAMING
Cee and Zee PunCh PaTTerns
PATTERN #G
3
/4" from web (Sellersburg, IN) or (Jacksonville, FL)
1 11/4" from web (Longmont, CO only)
PATTERN #H
13/4"
4"
For Standard Zees only.
2'
2"
If LGSI, Wide Flange Indicator
1
1
/2"
1
/2"
1
3
/4"
2'-1
For Standard Zees only.
2'
2"
5
/8" x 3/4" Vertical Slots
5
/8" x 3/4" Vertical Slots Shown (Sellersburg,IN) or (Jacksonville, FL)
5
/8" x 3/4" Horizontal Slots (Longmont, CO only)
5
/8" Round Holes Shown (Sellersburg, IN) or (Jacksonville, FL)
5
/8" x 3/4" Horizontal Slots (Longmont, CO only)
4'-31/2"
C
11/2"
L
11/2"
1
/2" Bay Width
4"
5
/8" Round Holes
Bottom of Purlin
Standard punch patterns not available on 4" web members.
6'-31/2"
Punch pattern
is similar on
both ends.
3
1
/4"
8"
4"
1
1
3
3'-1
/4"
13/4" from web (Sellersburg, IN) or (Jacksonville, FL) 11/4" from web (Longmont, CO only)
PATTERN #J
3
/4"
1
For LGSI or Standard Zees and Cees only.
2'-4" 2'-4"
2"
2"
If LGSI, Wide Flange Indicator
5
/8" x 3/4" Vertical Slots
5
/8" x 3/4" Vertical Slots Shown (Sellersburg, IN) or (Jacksonville, FL)
5
/2"
1
1
/2"
/8" x 3/4" Horizontal Slots (Longmont, CO only)
5
/8" Round Holes Shown (Sellersburg, IN) or (Jacksonville, FL)
5
/8" x 3/4" Horizontal Slots (Longmont, CO only)
C
1
/2" Bay Width
L
8"
1
11/2"
/2"
1
5
/8" Round Holes
Bottom of Purlin
Standard punch patterns not available on 4" web members.
Punch pattern
is similar on
both ends.
PSF-12
4"
5
/8" Round Holes
Standard punch patterns not available on 4" web members.
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Ofce) • www.metalsales.us.com
Punch pattern
is similar on
both ends.
SECONDARY FRAMING
eave sTruT PunCh PaTTerns
PATTERN #S 3 C
1
1
/4"
1"
31/2"
1
1
PATTERN #S 3 D
/4"
3"
Available at Sellersburg, IN, Jacksonville, FL and Woodland, CA
5
/8" Round Holes
5
/8" x 3/4" Vertical Slots
Bottom of Purlin
Punch pattern for eave struts with 3.5" ange only.
Available at Sellersburg, IN, Jacksonville, FL and Woodland, CA
Punch pattern
is similar on
both ends.
1
1
Punch pattern
1
/2"
1
/2"
C
L
is similar on
both ends.
1
/4"
1
1"
31/2"
PATTERN #S 4
1
/4"
1
3
/4"
1
4"
PATTERN #S 5
5
/8" Round Holes
5
/8" x 3/4" Horizontal Slots
Bottom of Purlin
3"
11/4"
Punch pattern for eave struts with 3.5" ange only.
C
L
4" flange eave struts available at Sellersburg, IN, Jacksonville, FL and Woodland, CA
Punch pattern
is similar on
both ends.
5
Bottom of Purlin
5
3"
1
1
/4"
/8" x 3/4" Vertical Slots
Punch pattern for eave struts with 4" ange only.
/8" Round Holes
1
/2"
11/2"
C
L
1
5" flange eave struts available at Sellersburg, IN, Jacksonville, FL and Woodland, CA
2"
5"
2"
1"
3"
5
Bottom of Purlin
5
/8" x 3/4" Vertical Slots
Punch pattern for eave struts with 5" ange only.
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Ofce) • www.metalsales.us.com
/8" Round Holes
Punch pattern
is similar on
both ends.
11/2"
C
L
PSF-13
SECONDARY FRAMING
CusTom PunChinG
sellersburG, indiana line only
Custom punching can be done for Standard Cees, Zees, LGSI Zees, and Eave Struts.
Web punching is available in 4" to 12" Cees, Zees, and Eave Struts. Punching is available only on center line of web for 4" member.
Any combination of punching (1-11) can be punched together.
Both holes or slots in 3, 4, 5, 6, 7, 10, and 11 must be punched together.
7
6
5
4
3
2
1
10
10
9
8
Flange punching is available in 6" to 12" Cees, Zees, and Eave Struts only.
11
11
1" 1"
C
L
1" 1"
5
"X"
"Z"
FLANGE PUNCHING
Flange punching can be punched in either "X" or "Z". "X" must be 1 "Z" must be 21/4", 3", or 4" from web.
Flange width must be 2
31/2", 37/8", 4", or 5" for punching
second holes or slots ("Z").
1
/4", 13/4", or 2" from web.
7
/8", 3", 33/8",
/8" x 3/4" Vertical Slots
5
/8" Round Holes
3"
3"
3" spacing required between holes or slots in anges.
Zee
LGSI Short
Flange
Web
Cee or
Eave Strut
C
L
PSF-14
"X"
"Z"
Flange
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Ofce) • www.metalsales.us.com
"X"
Flange
SECONDARY FRAMING
CusTom PunChinG
lonGmonT, Colorado line only
Custom punching can be done for Standard Cees, Zees, and Eave Struts.
Web punching is available in 4" to 12" Cees, Zees, and Eave Struts.
Flange punching is available in 6" to 12" Cees,
Any combination of punching (1-12) can be punched together.
6
5
4
3
2
1
8
7
Zees, and Eave Struts only.
11
12
9
1" 1"
C
L
1" 1"
1
1
/4"
1
2
/4"
5
/8" Round Holes
FLANGE PUNCHING
Flange punching can be punched in either "X", "Z", or Both dimensions from web.
5
/8" x 3/4" Vertical Slots
10
5
/8" x 3/4" Vertical Slots
5
/8" x 3/4" Horizontal Slots
Zee
Flange width must be 3" or 31/2" for punching second slots.
11/4"
1
2
/4"
Flange
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
Web
Cee or
Eave Strut
800.406.7387 (Corporate Ofce) • www.metalsales.us.com
11/4"
Flange
C
L
PSF-15
SECONDARY FRAMING
CusTom PunChinG
JaCksonville, florida line only
Custom punching can be done for Standard Cees, Zees, LGSI Zees, and Eave Struts.
Web punching is available in 4" to 12" Cees, Any combination of punching with the exception of (8) can be punched together.
Zees, and Eave Struts. Punching is available
only on center line of web for 4" member.
Both holes or slots in 3, 4, 5, 6, 7, 8, 14, and 15 must be punched together.
All four holes or slots in 9, 10, and 11 must be punched together.
9
9
8
C
L
1" 1"
1" 1"
"X"
"Z"
8
7
6
5
4
3
2
1
3"
5
/8" x 3/4" Vertical Slots
5
/8" Round Holes
4"
10
4"
10
11
Flange punching is available in 6" to 12" Cees,
Zees, and Eave Struts only.
11
4"
15
14
13
12
3"
3"
3" spacing required between holes or slots in anges.
FLANGE PUNCHING
Flange punching can be punched in either "X" or "Z". "X" must be 11/4", 13/4", or 2" from web. "Z" must be 21/4", 3", or 4" from web.
Flange width must be 2
31/2", 37/8", 4", or 5" for punching
second holes or slots ("Z").
PSF-16
7
/8", 3", 33/8",
"X"
"Z"
Flange
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Ofce) • www.metalsales.us.com
LGSI Short
Web
Zee
Flange
Cee or
Eave Strut
"X"
Flange
C
L
Loading...
+ 37 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use