Metal Sales Mini-Batten User Manual

MINI/MAXI-BATTEN

Table of ConTenTs

Product Page No.

Panel Information

Mini/Maxi-Batten Panel Proles...........................PMB-2

Panel Overview ...................................................PMB-2

Flashing Proles

Eave ....................................................................PMB-3

Extended Eave ....................................................PMB-3

Cleat ....................................................................PMB-3

Offset Cleat ..........................................................PMB-3

Starter ..................................................................PMB-3

Box Gutter ...........................................................PMB-3

Box Gutter End ....................................................PMB-3

Universal Gutter/Downspout Strap ......................PMB-3

1

/2" Downspout ............................................PMB-3

4" x 3

4" x 31/2" 95° Elbow ..............................................PMB-3

Downspout Bracket .............................................PMB-3

Valley ...................................................................PMB-3

Rake ....................................................................PMB-3

Rakewall ..............................................................PMB-3

Counter Flashing .................................................PMB-3

Reglet Flashing....................................................PMB-4

11" Ridge/Hip Cover ............................................PMB-4

Vented Ridge Cover ............................................PMB-4

Vent Drip ..............................................................PMB-4

Peak ....................................................................PMB-4

Pitch Break ..........................................................PMB-4

Outside Corner ....................................................PMB-4

Inside Corner .......................................................PMB-4

Gravel Stop..........................................................PMB-4

Coping .................................................................PMB-4

1.5" Sill/Head .......................................................PMB-4

2.25" Sill/Head .....................................................PMB-4

1.5" Sill to Soft ...................................................PMB-4

2.25" Sill to Soft .................................................PMB-4

1" Z-Closure ........................................................PMB-4

1.5" Z-Closure .....................................................PMB-5

Product Page No.

Detail Conditions

Eave with Offset Cleat Detail .............................PMB-10

Extended Eave Detail ........................................ PMB-11

Gutter with Offset Cleat Detail ...........................PMB-11

Valley with Offset Cleat Detail ...........................PMB-12

Slope Change Detail..........................................PMB-13

Transition Detail .................................................PMB-13

Rake Detail ........................................................PMB-14

Rake Parapet Counter Detail.............................PMB-15

Rake Parapet Reglet Detail ...............................PMB-15

High Side Eave at Parapet Counter Detail ........PMB-16

High Side Eave at Parapet Reglet Detail...........PMB-16

Peak Detail ........................................................PMB-17

Vented Ridge Detail ...........................................PMB-17

11" Ridge/Hip Detail...........................................PMB-18

Accessory Proles

5

Curved Mini-Batten

Mini-Batten (1") Clip ............................................PMB-5

Mini-Batten (1.5") Clip .........................................PMB-5

Maxi-Batten Clip ..................................................PMB-5

Bearing Plate .......................................................PMB-5

Tube Sealant .......................................................PMB-5

Tape Sealant........................................................PMB-5

Rubber Roof Jack ................................................PMB-5

Touch-Up Paint ....................................................PMB-5

Metal Panel Hemming Tool ..................................PMB-5

Vent Material........................................................PMB-5

/8" Clip .................................PMB-5

Testing Information

UL 580 Wind Uplift Information ............................PMB-6

UL 263 Fire Resistance Ratings ..........................PMB-7

Design/Installation Considerations

Fastener Installation Technique ...........................PMB-8

Condition of Substructure ....................................PMB-8

Ventilation ............................................................PMB-9

Panel Applications ...............................................PMB-9

© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11

800.406.7387 (Corporate Ofce) • www.metalsales.us.com

PMB-1

MINI/MAXI-BATTEN

Panel overview

PANEL PROFILES

C

12", 16", or 18" Coverage

C

12", 16", or 18" Coverage

C

12", 16", or 18" Coverage

SLOPE

SUBSTRATE

3

/8"

1"

7

/8"

CURVING SPECS.

1" Mini-Batten: 12", 16", 18"

1

/4"

3

/8"

1

1

/2" nominal

15/8"

1"

17/8"

13

/16"

5

/8"

12", 16", or 18"

Coverage

Minimum Radius : 4'-0" Pan & Batten
For panel lengths over 25'-0", please inquire.
24 gauge only.

The minimum recommended slope for any Mini/Maxi-Batten roong panel is 3:12.

The recommended substrate is

5

/8" plywood with a 30 pound felt moisture barrier. To avoid panel distortion,

use a properly aligned and uniform substructure. Please note that Mini/Maxi-Batten panels are not recom­mended for use over open framing.

COVERAGE

LENGTH

AVAILABILITY

APPLICATION

PERFORMANCE TEST

FASTENING SYSTEM

FASTENERS

MATERIALS

Mini-Batten panels have a coverage of 12", 16", and 18" widths either with 1" or 1.5" in heights.
Maxi-Batten panels have a coverage of 12", 16", and 18" widths in 1

7

/8" height.

Lengths under 5'-0" are available with some cutting restrictions. Maximum recommended panel length is 45'-0".
Longer panels require additional consideration in packaging, shipping, and erection. Please consult your Metal
Sales branch for recommendations (see PGI-2 and 3 for locations). Minimum curve of batten panels is 4'-0"
radius. For Curved panel lengths over 25'-0", please inquire.

Mini/Maxi-Batten panels are available in 26 and 24 gauge.

Architectural and Residential panel.

UL 580, ASTM E-1592 (1" Mini-Batten only), UL 2218, UL 790, UL 263,
Miami-Dade County (1" Mini-Batten only)

Concealed Clip System.

The fastener selection guide should be consulted for choosing proper fasteners for specic applications.
Quantity and type of fastener must meet necessary loading and code requirements (see PGI-12-13).

Steel grade 50, per ASTM A-792

FINISH

PMB-2

*Acrylic Coated Galvalume® (ACG) / ASTM A-792 - AZ55
Prepainted Galvalume / ASTM A-792 - AZ50
**Fluorocarbon (PVDF)

* Differential appearance of Acrylic Coated Galvalume roong materials is not a cause for rejection.
** Meets both Kynar 500 and Hylar 5000 specications.

© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11

800.406.7387 (Corporate Ofce) • www.metalsales.us.com

MINI/MAXI-BATTEN

flashing Profiles

EAVE

7

/8"

3

C

X*

3"

Hem

Length 10'-2" - *Specify Slope Angle

EXTENDED EAVE CLEAT

6"

1

/2"

1

X*

3"

Length 10'-2"

C

5

/8"

1

/2"

2

C

1

/2"

Length 10'-2"

OFFSET CLEAT STARTER BOX GUTTER

1

/2"

3

X*

5"

DOWNSPOUT 4" x 31/2"

4"

1

/2"

1

1

/2"

Length 10'-2"

BOX GUTTER END

1"

1

/2"

C

21/2"

Length 10'-2"

C

Length 10'-2", 20'-3" - *Specify Slope Angle

UNIVERSAL GUTTER/

DOWNSPOUT STRAP

Hem

135°

Hem

1"

1"

4"

C

5"

31/2"

5"

4"

5"

950 ELBOW 4" x 31/2"

31/2"

4"

(Also available 6" x 4")

(Also available in 45°)

RAKE

4"

5"

1"

C

16"

11/2"

DOWNSPOUT BRACKET

VALLEY

C

Length 10'-2", 20'-3"

(Also available 6" x 4")

X*

C

2"

10"

C

(Also available 4")

Length 10'-2", 20'-3" - *Specify Slope Angle

RAKEWALL COUNTER FLASHING

C

1

/2"

C

3

4"

1"

5

/8"

C

3

/4"

Hem

Length 10'-2", 20'-3"

5

/8"

Length 10'-2"

© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11

800.406.7387 (Corporate Ofce) • www.metalsales.us.com

Hem

3

/4"

Length 10'-2"

PMB-3

MINI/MAXI-BATTEN

flashing Profiles (ConT.)

REGLET FLASHING

C

1"

1

/2"

11" RIDGE/HIP COVER

1

5

/2"

2"

Hem

Hem

Length 10'-2"

VENT DRIP

Length 10'-2", 20'-3" - *Specify Slope Angle

PEAK

C

3

/4"

60°

120°

1

/4"

1

C

Length 10'-2"

31/4"

Length 10'-2", 20'-3" - *Specify Slope Angle

5"

X*

3

/8"

OUTSIDE CORNER INSIDE CORNER

1

5

/2"

C

51/2"

51/2"

X*

6"

VENTED RIDGE COVER

C

1

1

/8"

7

/8"

1"

3"

X*

C

3"

Hem

Length 10'-2", 20'-3" - *Specify Slope Angle

PITCH BREAK

4"

X*

C

6"

Length 10'-2" - *Specify Slope Angle

GRAVEL STOP

1

/2"

5

C

1

/2"

5

X*

1

/2"

C

4"

Length 10'-2", 20'-3" Length 10'-2", 20'-3"

Length 10'-2", 20'-3" - *Specify Slope Angle

COPING 1.5" SILL/HEAD 2.25" SILL/HEAD

10"

5

3

/8"

3

/8"

Length 10'-2", 20'-3"

Hem

1.5" SILL TO SOFFIT

1

/2"

2

3

/8"

3

4

/4"

C

1

/2"

4"

2

1"

5

/8"

Length 10'-2" Length 10'-2"

2.25" SILL TO SOFFIT

C

1

/2"

1

1

/2"

1

/2"

2

4

Length 10'-2"Length 10'-2"

C

1

1

/2"

1

/2"

1

/2"

2

1"

1" Z-CLOSURE

C

21/4"

1

/2"

3

/4"

1"

Length 10'-2"

3

/8"

C

1

2

/4"

1

/2"

C

1"

1"

PMB-4

© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11

800.406.7387 (Corporate Ofce) • www.metalsales.us.com

MINI/MAXI-BATTEN

1.5" Z-CLOSURE

1"

C

flashing Profiles (ConT.)

1

1

/2"

1"

Length 10'-2"

Mini/MaXi-baTTen

CURVED MINI-BATTEN

5

/8" CLIP

MAXI-BATTEN CLIP

C- Indicates color side of flashing.

aCCessory Profiles

MINI-BATTEN (1") CLIP MINI-BATTEN (1.5") CLIP

BEARING PLATE

TUBE SEALANT

TAPE SEALANT

7

/8" X 3/16" X 25'

Double Bead

Butyl - Gray

METAL PANEL

HEMMING TOOL

4" X 5"

10.3 oz. Cartridge
Urethane

RUBBER ROOF JACK TOUCH-UP PAINT

MINI (1/4" to 11/8" O.D. Pipe)
#2 (13/4" to 3" O.D. Pipe)
#4 (3" to 6" O.D. Pipe)
#6 (6" to 9" O.D. Pipe)
#8 (7" to 13" O.D. Pipe)

Available in pints

PVDF / MS Colorfast45

VENT MATERIAL

33/8"

7

/8"

4"

© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11

800.406.7387 (Corporate Ofce) • www.metalsales.us.com

PMB-5

MINI/MAXI-BATTEN

Ul 580 wind UPlifT inforMaTion

1

MINI-BATTEN 1"

Construction No. 430

March 24, 1998
Uplift - Class 90
Fire Not Investigated

2

1

2

1

1"

4

1. Metal Roof Deck Panels* No. 24 MSG min coated steel. Max panel width 22-3/4 in. and rib height 7/8 in. Panels
continuous over two or more spans. End laps to occur adjacent to supports with panels overlapped min 4 in. A line of sealant
may be used at panel ends and side laps.
METAL SALES MANUFACTURING CORPORATION - “Mini-Batten 1 Inch Panel”

1A. Panel Cap* Cap covering panel ribs and clips to be 3/8 in. wide and 1 in. high formed from the same type and thickness
material as that used to fabricate metal panels (Item 1).
METAL SALES MANUFACTURING CORPORATION - “Mini-Batten 1 Inch Panel Cap”

2. Roof Deck Fasteners* - (Panel Clips) One piece clip, 7/8 in. high and 2-3/16 in. wide, before field forming, around
panel corrugations and 2 in. long. Clips are spaced max 24 in. OC, located at the panel sides with guide holes in bottom
to accommodate screw fasteners (Item 3).
METAL SALES MANUFACTURING CORPORATION - “Low Mini-Batten Panel Clip”

3

5

PMB-6

3. Fasteners - (Screws) Screws used to attach the panel clips to plywood to be No. 10-12 by 1 in. long Pancake head wood
screw with a No. 2 Phillips Drive and A-Point. Min one screw per clip. Screws used to attach plywood substructure (Item

4) to wood trusses or joists (Item 6) to be No. 8 by 2 in. Bugle head screws with No. 2 Phillips Drive and S-Point. As an
optional fastener, 2-1/2 in. long 8d common deformed shank nails may be used. Spacing of screws or nails to be 6 in. O.C. at
plywood ends and 12 in. O.C. at interior connections.

4. Substructure - (Plywood) Plywood decking to be nom 5/8 in. thick, exposure sheathing span C-D, 40/20 plywood. (All
joints to be sealed against leakage by using tape and/or caulk.

5. Felt Paper (Optional) - One or two ply, 30 lb organic felt.

6. Joists - (Wood) (Not shown) - Wood joists to support plywood spaced at 2 ft 0 in. O.C. may be one of the following:

A. Nom 2 by 6 in. wood joists No. 2 or better.
B. Nom 2 by 4 in. wood when used on a top cord of a wood truss, No. 2 or better.
C. Light gauge structural steel framing with the member against the plywood to be a min No. 22 MSG coated steel, or
Steel joists, purlins or hot rolled beams to support steel deck to run perpendicular to the direction of deck at max 6 ft 0 in.
O.C., min thickness 22 MSG, sized by manufacturer to support loads.

7. Insulation (Optional) (Not shown) - Any compressible blanket insulation, 3 in. max thickness before compression.
Insulation to be sandwiched between substructure (Item 4) and its support (Item 6).
Refer to General Information, Roof Deck Construction (Roofing Materials and Systems Directory) for Items Not Evaluated.

*Bearing the UL Classification Marking

U

®

© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11

800.406.7387 (Corporate Ofce) • www.metalsales.us.com

Underwriters Laboratories Inc. ®

L

LISTED