Metabo STE 80, STE 100 PLUS, STEB 135 PLUS, STEB 135, KS 54 BROCHURE

SAWS

THE NUMBER
ONE CHOICE
FOR THE
PROFFESSIONAL

The Metabo circular saw range is built for outright precision

and quality. Built tough for the demands of the professional,

machines with long life motors, safety clutches, large rip fences,

solid all metal gear housings, riving knifes and quick cut blades

fitted as standard are available within the range. Metabo. Work.

Don’t play.

188 |

SAWS

| 189

CIRCULAR SAWS

EQUIPMENT FEATURES



Ideal handling by ergonomic design



especially high sawing capacity per battery pack



Carbide circular saw blade



Easy saw blade replacement with spindle lock



Fully closed guide plate for secure support



Precisely adjustable and well visible cutting indicator

for sawing after initial cut



Suitable for bevel cuts up to 47°



Safety lock switch to prevent unintentional start of the machine



Built-in collector fan to prevent overheating



Sturdy aluminum die cast saw housing



Rubber-coated handle



External dust extraction outlet

... 40% more
output with
40% less weight

COMMON FEATURES



Metabo S-automatic torque limiting clutch



Spindle lock



Fully closed guide plate for secure support



Clearly visible cutting indicator for sawing after initial cut



Safety lock switch to prevent unintentional start of the machine



Angle adjustment of the sawing blade to the guide plate can be

aligned for maximum cutting precision



Angle-precise bevel cuts up to 45°



Lubrication system for long service life of the gear



Optimum sawing dust ejection



External dust extraction outlet



Precision guide rail available as accessory (order no. 6.31250)

18 Volt

Cordless Circular Saw

KSAP 18

Comparative
device characteristics

Type of battery pack Li-Ion
Battery pack voltage 18 V

1)

Capacity of battery pack 2,2 Ah
Cutting depth adjustable 0 - 53,5 mm
Maximum cutting depth at 90° 53,5 mm
Maximum cutting depth at 45° 42 mm
Saw blade diameter 165 mm
No load speed 2.500 /min
Weight (including battery pack) 4,3 kg

Standard equipment Carbide circular saw blade

(18 teeth), 2 Li-Ion battery packs
(18 V/2.2 Ah), hexagon spanner,

"AIR COOLED" quick charger

AC 30 Plus

KS 66KS 54KSAP 18

1010 Wa tt

Circular Saw

KS 54

1400 Watt

Circular Saw

KS 66

Special advantages



Sturdy aluminum die cast



saw housing



Cutting indicator can



be set precisely



Extraction nozzle rotatable



and stoppable



Auto-stop carbon brushes 

Comparative
device characteristics

Torque 4 Nm 9 Nm
Maximum cutting depth

54 mm 66 mm
at 90°
Maximum cutting depth

38 mm 47 mm
at 45°
Cutting depth adjustable 0 - 54 mm 0 - 66 mm
Saw blade diameter 160 mm 190 mm
No load speed 6.000 /min 4.200 /min
Rated input power 1.010 W 1.400 W
Output power 630 W 800 W
Rated load speed 4.200 /min 3.200 /min
Cutting speed at rated load 35 m/s 28 m/s
Weight (without mains cable) 3,4 kg 5,5 kg

1)

at nominal voltage,

maximum voltage of 20 Volts

Type KSAP 18
Order no. 6.02168

190 |

Standard equipment Carbide thin

circular saw blade
(10 teeth), parallel

guide/ripping

fence, allen key

Carbide thin
circular saw blade
(14 teeth), parallel

guide/ripping

fence, allen key

Type KS 54 KS 66
Order no. 6.00540



6.00542



CIRCULAR SAWS

COMMON FEATURES



Metabo S-automatic torque limiting clutch



Spindle lock



Sturdy aluminum die cast saw housing



Sturdy guide plate made from light-weight magnesium die cast



Fully closed guide plate for secure support



Stylish rubber insert on the top handle to aid a comfortable

and secure grip



Long double-guided parallel rip fence, can be used left or right



Clearly visible cutting indicator for sawing after initial cut



Safety lock switch to prevent unintentional start of the machine



Angle adjustment of the sawing blade to the guide plate can be

aligned for maximum cutting precision



Angle-precise bevel cuts up to 45°



Lubrication system for long service life of the gear



Optimum sawing dust ejection



External dust extraction outlet



Extraction nozzle rotatable and stoppable



Auto-stop carbon brushes



Precision guide rail available as accessory (order no. 6.31213)



Adjustment of machine without tools for using on the precision

guide rail 6.31213

SAWS

MACHINES

SPECIAL-PURPOSE

SYSTEMATIC

ORGANISATIONGARDEN

KS 66 Plus KSE 68 Plus

NEW NEW

1400 Watt

Circular Saw

KS 66 Plus

1600 Watt

Electronic Circular Saw

KSE 68 Plus

Special advantages



Quick stop of saw blade on shutting



off the machine



Vario Tacho Constamatic (VTC) full-wave



electronics



Thumbwheel for preselection of speed 



Electronic soft start 



Overload protection 



Two position riving knife lift point 

Comparative device characteristics

Torque 9 Nm 11 Nm
Maximum cutting depth at 90° 66 mm 68 mm
Maximum cutting depth at 45° 47 mm 48 mm
Cutting depth adjustable 0 - 66 mm 0 - 68 mm
Saw blade diameter 190 mm 190 mm
No load speed 4.200 /min 2.000 - 4.200 /min
Rated input power 1.400 W 1.600 W
Output power 800 W 850 W
Rated load speed 3.200 /min 4.200 /min
Cutting speed at rated load 28 m/s 42 m/s
Weight (without mains cable) 5,5 kg 5,6 kg

TECHNOLOGY

WOOD-PROCESSING

TECHNOLOGY

WATER-/PUMP

Standard equipment Carbide thin circular saw blade (14 teeth),

parallel guide/ripping fence, allen key

Carbide thin circular saw blade (14 teeth),

parallel guide/ripping fence, allen key

Type KS 66 Plus KSE 68 Plus
Order no. 6.00544 6.00545

| 191

WELDING

COMPRESSED

TECHNOLOGY

AIR SYSTEMS

ACCESSORIES FOR CIRCULAR SAWS

Accessories

Order no.

6.31213

NEW

Precision guide rail



Clean-cut edges with no

splintering thanks to the guide
rail's plastic-extrusion strip edging
– even with bevel cuts up to 45°



Guide rail made of sturdy,

anodised Aluminium extrusion



Anti-slip backing provides safe

and reliable support and protects
the workpiece surface against
scratches



Guide rule, adjustable to

eliminate play

suitable for: Metabo jig saws,
circular saws and router models
OFE 738 and Of E 1229 Signal
(when using the appropriate
accessories; KS 66 Plus,
KSE 68 Plus can be used)
Overall length: 1.500 mm

Connector



For joining together

6.31211

two precision guide rails

NEW

Set of two clamps



For fixing the precision guide rail

6.31031

on the workpiece or work table

NEW

Guide plate



For use with the KSAP 18,

6.31019

KS 54 and KS 54 SP circular saws
on the 6.31213 guide rail.



NEW

Complete guide plate with

2 mounted aluminium
threaded bushes for the
circular saws

Adapters



For use with the KS 66 and

6.31020

KSE 68 Plus circular saws
(alt. Order No. 6.00543)

NEW

on the 6.31213 guide rail.

Sawdust ejection nozzle



Can be rotated



For fitting the suction

6.30924

hose on the circular saw
KS 54 and KSE 55 Plus

Suction hose

6.31938
With connector Ø 58 mm
for bayonet fitting and rubber
connector (internal Ø 30 mm,
outside Ø 35 mm)
Connector Ø: 58/35 mm
Hose length: 3,5 m
Suction hose Ø: 27 mm

Metabox IV



Extremely robust, unbreakable

boxes with a wide carrying handle



Carefully thought-out organisation

system within the box... ensures
that the correct accessory is always
with the right tool - special inserts
for storing accessories and small
parts... and transferring them from
box to box - boxes can be stacked
and connected - well-structured,
clearly arranged storage system,
for the workshop, the car, anywhere



The Metabox stays in shape -

even at extreme temperatures
(-40° to +90°C)



No protruding parts, and thus no

danger of getting caught up, e.g.

on building sites
Dimensions: 395 x 295 x 315 mm
For KS 54, KSE 55 Plus, KS 66
For KS 66 Plus, KSE 68 Plus

6.24595

6.24598

Work benches

Flexo 500 universal table



For the stationary use of

Metabo jig saws, routers and
circular saws (when using
appropriate accessories)



With foldable stand and

height adjustment



Sturdy steel construction and a large

table top made from continuous
strand casting

Special accessories for Flexo 500

Circular saw set

NEW

For Metabo KS 54,
KSE 55 Plus, KS 66,
KSE 68 Plus circular saws
Packaging dimensions (LxHxW):
750 x 280 x 130 mm

Table width extension



Increases the supporting

surface; ideal for
large boards



Enables cuts with

parallel guide of
up to 610 mm



Height adjustable

Length: 674 mm
Width: 501 mm

Parallel guide/ripping fence



For long cuts or for cutting

large boards



Long attachment profile

for guiding the work
piece safely

Mitre guide



Length of rule: 250 mm



Angle area: +/- 60°

Chip and dust extraction unit



Extraction at two points:

at chip box and at the
top on the guard



Clear view of the

work piece



Cleaner working

environment

Extraction nozzle Ø: 100 mm

Order no.

NEW

0910064304

GB

Order no.

0910064398

GB

0910064401

GB

0910063707

GB

0910064410

GB

0910064371

GB

192 |

FOR CIRCULAR SAWS

Carbide-tipped circular saw blades
"power cut"

• For fast, coarse and semi-fine cuts with continuous feed rates

• Good cutting results for straight cuts in solid wood

• Partly usable for construction wood with nails and concrete residue

• With coated wood or other composites only coarse cut quality is possible

NEW

CIRCULAR SAW BLADES

SAWS

Diameter mmCutting

width
mm

Steel blade
thickness
mm

Bore-Ø
mm

Number
of teeth

Tooth form Rake

angle

suitable for Order no.

152 2,4 1,6 20 12 Flat top tooth 15° Ks 0852 S 6.28001
160 2,2 1,4 20 10 Alternately bevel-ground tips 22° KS 54 / KSE 55 Plus 6.28002
167 2,4 1,6 20 12 Flat top tooth 15° Ks 1155 S 6.28003
190 2,6 1,8 20 14 Alternately bevel-ground tips 25° Ks 1266 S / Ks 1468 S 6.28004
190 2,2 1,4 30 14 Alternately bevel-ground tips 25° KS 66 / KSE 68 Plus 6.28005
190 2,2 1,4 30 16 Flat/trapezoid tooth 12° KS 66 / KSE 68 Plus 6.28006
210 2,6 1,8 30 16 Flat top tooth 25° Ks E 1678 S-Signal 6.28007
230 2,6 1,8 30 18 Flat/trapezoid tooth 10° KS 85 6.28010
230 2,6 1,8 30 24 Alternately bevel-ground tips 20° KS 85 6.28011

1)

exceptionally nail-proof saw blade

Carbide-tipped circular saw blades
"precision cut"

• Very wide range of uses in woodworking

• For very good, clean cut results with straight or cross cutting in softwood and hardwood

• Well suited for solid and plywoods, chipboards untreated, coated or veneered, MDF, composite materials

• The circular saw must have a high performance motor

NEW

Diameter mmCutting

width
mm

Steel blade
thickness
mm

Bore-Ø
mm

Number
of teeth

Tooth form Rake

angle

suitable for Order no.

160 1,6 1,1 20 24 Alternately bevel-ground tips 22° KSAP 18 6.28030
160 2,2 1,4 20 24 Alternately bevel-ground tips 20° KS 54 6.28031
167 2,4 1,6 20 20 Alternately bevel-ground tips 20° Ks 1155 S 6.28032
167 2,4 1,6 20 40 Alternately bevel-ground tips 10° Ks 1155 S 6.28033
190 2,6 1,8 20 48 Alternately bevel-ground tips 10° Ks 1266 S/ Ks 1468 S 6.28034
190 2,2 1,4 30 48 Alternately bevel-ground tips 15° KS 66 / KSE 68 Plus 6.28035
210 2,6 1,8 30 56 Alternately bevel-ground tips 10° Ks E 1678 S-Signal 6.28040
230 2,6 1,8 30 56 Alternately bevel-ground tips 15° KS 85 6.28044

MACHINES

SPECIAL-PURPOSE

1)

1)

1)

SYSTEMATIC

ORGANISATIONGARDEN

TECHNOLOGY

WOOD-PROCESSING

Carbide-tipped circular saw blades
"multi cut"

• Universal use for demanding materials

• For the highest standards in cutting quality, e.g. laminate, plastic, aluminium, copper and bronze materials

• Ideally suited for many applications in interior work

• Perfect cutting results, also when crosscutting, in solid wood, coarse, coated or veneered chipboards, MDF

NEW

Diameter mmCutting

width
mm

• The circular saw must have a very high performance motor

• Requires steady and relatively slow feed rates

Steel blade
thickness

Bore-Ø
mm

Number
of teeth

Tooth form Rake

mm

angle

suitable for Order no.

150 2,4 1,6 20 36 Alternately bevel-ground tips 10° Ks 0852 S 6.28000
152 2,4 1,6 20 54 Flat/trapezoid tooth 5° neg. Ks 0852 S 6.28070
160 2,2 1,4 20 30 Alternately bevel-ground tips 5°+/-1.5 KS 54 / KSE 55 Plus 6.28071
160 2,2 1,4 20 42 Alternately bevel-ground tips 15° KS 54 / KSE 55 Plus 6.28072
160 2,2 1,4 20 54 Flat/trapezoid tooth 8° KS 54 / KSE 55 Plus 6.28073
167 2,4 1,6 20 42 Flat/trapezoid tooth 6° neg. Ks 1155 S 6.28074
190 2,2 1,4 30 36 Alternately bevel-ground tips 5°+/-1.5 KS 66 / KSE 68 Plus 6.28075
190 2,6 1,8 20 54 Flat/trapezoid tooth 5° neg. Ks 1266 S / Ks 1468 S 6.28076
190 2,2 1,4 30 56 Flat/trapezoid tooth 8° KS 66 / KSE 68 Plus 6.28077
210 2,6 1,8 30 54 Flat/trapezoid tooth 5° neg. Ks E 1678 S-Signal 6.28078
210 2,8 2,0 30 60 Alternately bevel-ground tips 5° neg. Ks E 1678 S-Signal 6.28079
210 2,8 2,0 30 60 Flat/trapezoid tooth 5° neg. Ks E 1678 S-Signal 6.28080
230 2,6 1,8 30 60 Alternately bevel-ground tips 5° KS 85 6.28085
230 2,6 1,8 30 60 Flat/trapezoid tooth 8° KS 85 6.28086

WATER-/PUMP

WELDING

COMPRESSED

TECHNOLOGY

TECHNOLOGY

AIR SYSTEMS

| 193

JIG SAWS

OTHERS SOMETIMES JUST DON‘T CUT IT.

Metabo offer a solid range of Jigsaws from entry level

through to top end professional machines. Backed up

with an extensive range of accessories these machines

are capable of cutting a whole host of materials from

wood, metals, plastics, brick and breeze block to fiber

glass and rubber. Important features include high

powered motors, tough gear housings, solid blade sup-

ports and variable speed electronics to enable the right

speed selection for the job in hand.

Vario Constamatic (VC) electronics

allow you to set the right speed for
the application and then maintain that
speed, even under moderate loading.

Ergonomic design

Safe and comfortable

work due to a model

that fits perfectly in the

hand.

Die cast aluminium

gear housing

Metal gear housings

ensure optimum inte-

gral machine strength

and maximum heat

dissipation which aids

motor cooling and

prolongs service life.

Metabo „Quick“

saw blade

change

Fast, convenient

and safe. Saw

blade change

without key.

Powerful for continuous professional use

The 720-Watt electronic orbital jigsaws
enable saw cuts of up to 135 mm thickness
in wood.

194 |

Quick stop

of guide plate

It enables bevel

cuts with angle

settings of 15, 30

and 45°.

Absolutely straight or circular cuts

Additional accessories such as guide rails
or circular guides expand the range of
applications of the Metabo jigsaws.

5-level pendulum

blade movement

High cutting output,

more comfortable wor-

king, longer service life

of saw blades.

Vario Constamatic (VC) full-wave electronics

The number of strokes can be adapted
individually to the material to be cut. For
metal, for example, it is low, for wood it is
high.

Saw blade support
roller with needle
bearing and guide groove

Precise saw cuts, as
the support roller is
particularly deep.

COMMON FEATURES



Robust gear and motor design



Easier and quicker saw blade change



Low lying saw blade supporting roller



Quick locking of guide plate for bevel cuts



Ideal handling by ergonomic design



Full grip bow type handle



Blower for free view of cutting line



Upward slidable grip-guard



Adjustable pendulum stroke



External dust extraction outlet



Auto-stop carbon brushes



Chip break guard in the guide plate



Precision guide rail and guiding device available

as accessory



Case for allen key

JIG SAWS

SAWS

MACHINES

SPECIAL-PURPOSE

SYSTEMATIC

ORGANISATIONGARDEN

STE 80 QuickSTE 70ST 50 Pendix

400 Watt

Orbital Jig Saw

ST 50 Pendix

570 Watt

Electronic

Orbital Jig Saw

STE 70

610 Watt

Electronic

Orbital Jig Saw

STE 80 Quick

Special advantages



Metabo "Quick" saw



blade change



Vario Constamatic (VC)



full-wave electronics



Thumbwheel for preselection



of number of strokes

Comparative device characteristics

Torque 4 Nm 5 Nm 5,5 Nm
Maximum thickness of material in

- Wood 50 mm 70 mm 80 mm

- Nonferrous metals 10 mm 20 mm 25 mm

- Sheet steel 3 mm 6 mm 8 mm
Levels of pendulum stroke 4 4 4
Strokes at no load 3.000 /min 1.000 - 3.000 /min 1.000 - 3.000 /min
Rated input power 400 W 570 W 610 W
Output power 240 W 340 W 360 W
Weight (without mains cable) 2,2 kg 2,2 kg 2,3 kg

Standard equipment Grip-guard, chip break guard

plate, jig saw blade, allen key

Protective glass, grip-guard,

chip break guard plate,
jig saw blade, allen key

Protective glass, grip-guard,

attachable guard plate with chip

break guard plate, jig saw blade,

allen key

TECHNOLOGY

WOOD-PROCESSING

TECHNOLOGY

WATER-/PUMP

WELDING

TECHNOLOGY

Type ST 50 Pendix STE 70 STE 80 Quick
Order no. 6.04000



6.05700



6.06100



| 195

COMPRESSED

AIR SYSTEMS

JIG SAWS

COMMON FEATURES



Robust gear and motor design



Low lying saw blade supporting roller



Quick locking of guide plate for bevel cuts



Ideal handling by ergonomic design



Blower for free view of cutting line



Upward slidable grip-guard



Vario Constamatic (VC) full-wave electronics



Thumbwheel for preselection of number of strokes



Adjustable pendulum stroke



Die cast aluminium gear housing



External dust extraction outlet



Auto-stop carbon brushes



Chip break guard in the guide plate



Precision guide rail and guiding device available

as accessory



Case for allen key

STE 100 Plus STE 135 Plus STEB 135 STEB 135 PlusSTE 135

680 Watt

Electronic

Orbital Jig Saw

STE 100 Plus

720 Watt

Electronic

Orbital Jig Saw

STE 135

720 Watt

Electronic

Orbital Jig Saw

STE 135 Plus

720 Watt

Electronic

Orbital Jig Saw

STEB 135

720 Watt

Electronic

Orbital Jig Saw

STEB 135 Plus

Special advantages



Powerful cutting in wood



up to 135 mm thickness



Easier and quicker saw blade



change



Metabo "Quick" saw blade



change



Rubber-coated full grip



bow-type handle



Slim motor housing and



additional knob

Comparative
device characteristics

Torque 6 Nm 7 Nm 7 Nm 7 Nm 7 Nm
Maximum thickness
of material in

- Wood 110 mm 135 mm 135 mm 135 mm 135 mm

- Nonferrous metals 25 mm 35 mm 35 mm 35 mm 35 mm

- Sheet steel 8 mm 10 mm 10 mm 10 mm 10 mm
Levels of pendulum stroke 5 5 5 5 5
Strokes at no load 1.000 - 2.800 /min 1.000 - 3.000 /min 1.000 - 3.000 /min 1.000 - 3.000 /min 1.000 - 3.000 /min
Rated input power 680 W 720 W 720 W 720 W 720 W
Output power 400 W 450 W 450 W 450 W 450 W
Weight (without mains cable) 2,6 kg 2,5 kg 2,5 kg 2,6 kg 2,6 kg

Standard equipment Extraction nozzle,

protective glass,

grip-guard, chip

break guard plate,

jig saw blade,

allen key

Extraction nozzle,

protective glass,
grip-guard, chip

break guard plate,

jig saw blade,

allen key

Extraction nozzle,

protective glass,

grip-guard, chip

break guard plate,

jig saw blade,

allen key

Extraction nozzle,

protective glass,
grip-guard, chip

break guard plate,

jig saw blade,

allen key

Extraction nozzle,

protective glass,

grip-guard, chip

break guard plate,

jig saw blade,

allen key

Type STE 100 Plus STE 135 STE 135 Plus STEB 135 STEB 135 Plus
Order no. 6.10501 6.11100 6.10900



6.11200 6.11000



196 | 196 |

ACCESSORIES FOR JIG SAWS

Jigsaw blade assortments with single lug bayonet shank

Suitable for Metabo, AEG, Atlas Copco, Black & Decker, Bosch,
DeWalt, Elu, Festo, Hitachi, Holz-Her, Kress, Makita, Skil ...

Jigsaw blade assortment 1



For wood and metal



HCS saw blades/

HSS saw blade

Consisting of 1 saw blade each:

6.23634, 6.23633, 6.23637
Material suitability:
Wood, Metal
Number of parts: 3

Jigsaw blade assortment 2



For wood, metal and plastic



HCS saw blades/

HSS saw blade

Consisting of 1 saw blade each:

6.23633, 6.23635, 6.23632, 6.23631
und 6.23637
Material suitability:
Wood, Plastics, Metal
Number of parts: 5

Jigsaw blade assortment 3



For wood, metal and plastic



HCS saw blades/

HSS saw blades

Consisting of 2 jigsaw blades each:

6.23634, 6.23633, 6.23646,

6.23637, 6.23638
Material suitability:
Wood, Metal, Plastics
Number of parts: 10

Jigsaw blade assortment 4



For wood



HCS saw blades

Consisting of 10 saw blades

6.23633 and 6.23635 and
5 saw blades 6.23649
Material suitability: Wood
Number of parts: 25

Accessories

Guard plate



For fitting on the base

plate of jigsaws. The guard
plate protects sensitive
workpiece surfaces
from scratches

Circle-cutting and
parallel guide



For cutting circles of Ø 100

to Ø 360 mm and
for cutting parallel
to an edge (maximum distance
from the edge 210 mm)

Guiding device



For using jigsaws

in conjunction
with the guide
rail 6.31250/ 6.31213

Precision guide rail



Clean-cut edges with no

NEW

splintering thanks to the
guide rail's plastic-extrusion
strip edging – even with bevel
cuts up to 45°



Guide rail made of sturdy,

anodised Aluminium extrusion



Anti-slip backing provides

safe and reliable support
and protects the workpiece
surface against scratches



Guide rule, adjustable

to eliminate play

Overall length: 1.500 mm

Order no.

6.23968

6.23645

6.23600

6.23698

Order no.

6.23664

6.31340

6.31249

6.31213

NEW

NEW

NEW

Connector



For joining together

two precision guide rails

Set of two clamps



For fixing the precision

guide rail on the

NEW

workpiece
or work table

Jigsaw bench mounting plate

With clamp for fixing on the
workbench
Table-top dimensions:
183 x 255 mm

Flexo 500 universal table



For the stationary use

of Metabo jig saws,
routers and circular
saws (when using
appropriate accessories)



With foldable stand and

height adjustment



Sturdy steel construction

and a large table top
made from continuous
strand casting

Table width extension



Increases the supporting surface;

ideal for large boards



Enables cuts with parallel guide

of up to 610 mm



Height adjustable

Suitable for: UK 333, UK 290,
Flexo 500
Length: 674 mm
Width: 501 mm

Lubricating stick



For lubricating the

jigsaw blades when
sawing metal

3 chip break guard plates

Suitable for:
ST 50 Pendix,
STE 70, STE 80 Quick

3 chip break guard plates

Suitable for: STE 100 Plus,
STE 135, STE 135 Plus,
STEB 135, STEB 135 Plus

Suction hose

With connector Ø 58 mm
for bayonet fitting and rubber
connector (internal Ø 30 mm,
outside Ø 35 mm)
Hose length: 3,5 m
Suction hose Ø: 27 mm

Carry case

For ST 50 Pendix, STE 70,
STE 80 Quick

Carry case

For STE 100 Plus, STE 105 Plus,
STEB 105 Plus, STE 135,
STE 135 Plus, STEB 135,
STEB 135 Plus

Metabox I for ST 50-STEB 135

For ST 50 Pendix, STE 70,
STE 80 Quick, STE 100 Plus,
STE 135 Plus, STEB 135 Plus
Dimensions: 395 x 295 x 105 mm

Order no.

6.31211

6.31031

6.23689

0910064304

GB

0910064401

GB

6.23443

6.31208

6.23665

6.31938

6.25450

6.25446

6.24639

SAWS

MACHINES

SPECIAL-PURPOSE

SYSTEMATIC

ORGANISATIONGARDEN

TECHNOLOGY

WOOD-PROCESSING

TECHNOLOGY

WATER-/PUMP

WELDING

TECHNOLOGY

AIR SYSTEMS

COMPRESSED

| 197| 197

JIG SAW BLADES

WITH THESES ONE ALWAYS MAKES A GOOD CUT.

The features of the Metabo jig saw blades

Colour

The colour indicates for which material the blade is suited best.

Yellow for wood
Yellow with blue lettering for wood with nails
Blue for metal
Black for special applications

Basic blade material

HCS carbon steel, for cutting soft wood, hardboards, plastics

HSS High yielding high-speed steel, suitable for metal, aluminium work

BiM Bimetal especially flexible mix of HCS and HSS. The saw blades have a much higher life expectancy
(bimetal) than HCS and HSS and have proven their worth when there is danger of shaft-breaking

HM Hard-Metal (carbide) applicable to stainless steels, glass, re-inforced plastic, plastics, gypsum

plaster or cement fibre boards. Saw blades with HM-coating are suitable for cutting ceramic tiles

Quality class

>classic< series good results and very good service life
>professional< series fast, clean and precise angle-cutting with long service life
>pionier< series cuts fast through all materials ("through thick & thin")
>expert< series for special applications

Type

Teeth milled,
offset for clearance gap

A relative rough cut,
fast progress in cutting
on hard and soft wood,
aluminium, NE-metals
and plastics

Teeth milled,
waved for clearance
gap

A relative rough cut,
fast progress in cutting
hard and soft wood,
aluminium, NE-metals
and plastics

Teeth ground,
offset for clearance
gap

Fast cutting in hard
and soft wood

Shank forms

The jig-saw blades from Metabo are produced to all shank forms matching the
jig saws available from other brand names.

Teeth ground, offset
for clearance angle
and clearance gap

Fine and clean cut in
wood and plastics

198 |

198 |

Single lug bayonet
shank

U-Shank Makita-Shank Fine shank

JIG SAW BLADES

Jig saw blades with single lug bayonet shank

Suitable for Metabo, AEG, Atlas Copco, Black & Decker, Bosch, DeWalt, Elu, Festo, Hitachi, Holz-Her, Kress, Makita, Skil ...

Material suitability Version Material Usable

length
mm

FOR WOOD, "CLASSIC" SERIES

Tooth
pitch

Corresponds
to
Bosch type

Packing
unit

Order
no.

SAWS

Hard wood, Soft wood, Chipboards,
Wood-core plywood 2-15 mm,
Fibre boards 2-15 mm, Plastics,
Insulating material

Hard wood, Soft wood, Chipboards,
Wood-core plywood 2-15 mm,
Fibre boards 2-15 mm, Plastics,
Insulating material, Saw blade
with insertion head

Hard wood, Soft wood, Chipboards,
Wood-core plywood 2-20 mm,
Fibre boards 2-20 mm, Plastics,
Insulating material, Especially
for curved cuts

Hard wood, Soft wood,
Plastics, 4-50 mm,
For quick,
rough cuts

Milled, Crimped HCS 51 2,0 mm T 119 B 5 6.23631

Milled, Crimped HCS 66 1,9 - 2,3 mm/

Milled, Crimped HCS 51 2,0 mm T 119 BO 5 6.23646

Milled, Crossed HCS 74 3,0 mm T 111 C 3 6.23963

FOR WOOD, "PROFESSIONAL" SERIES

Hard wood, Soft wood,
Chipboards,
Wood-core plywood 5-50 mm,
For quick cuts

Ground, Crossed HCS 74 4,0 mm T 144 D 3 6.23964

23-17 TPI/
progressiv

T119B 5 6.23920

25 6.23605

5 6.23632
25 6.23606
100 6.23714

5 6.23633
25 6.23690
100 6.23712

MACHINES

SPECIAL-PURPOSE

SYSTEMATIC

ORGANISATIONGARDEN

Hard wood, Soft wood,
Chipboards, Wood-core
plywood 5-50 mm,
For quick cuts, Saw blade
with insertion head

Hard wood, Soft wood,
Chipboards,
Wood-core plywood 5-50 mm,
Especially for curved cuts

Hard wood, Soft wood,
Chipboards, Wood-core
plywood 5-50 mm,
Especially for curved cuts,
Saw blade with insertion head

Hard wood, Soft wood,
Chipboards, Wood-core
plywood 2-15 mm,
Fibre boards,
For quick cuts

Hard wood, Soft wood,
Chipboards, Wood-core
plywood, Fibre boards,
Constructional wood, Extra thick

Ground, Crossed HCS 74 4-5,2 mm/

6-5 TPI/
progressiv

Ground, Crossed HCS 74 4,0 mm T 244 D 3 6.23966

Ground, Crossed HCS 74 4-5,2 mm/

6-5 TPI/
progressiv

Ground, Crossed HCS 126 4,0 mm T 344 D 5 6.23678

Ground, Crossed HCS 150 4,0 mm T 744 D 5 6.23603

T 144 D 5 6.23921

5 6.23649
25 6.23607
100 6.23713

T 244 D 5 6.23960

TECHNOLOGY

WOOD-PROCESSING

TECHNOLOGY

WATER-/PUMP

WELDING

TECHNOLOGY

Soft wood, Plywood,
Plastics, 1.5-5 mm,
Especially for curved cuts,
For clean cuts

Clearance angle
ground, Tapered

HCS 57 1,4 mm T 101 AO 5 6.23651

25 6.23624

| 199

| 199

COMPRESSED

AIR SYSTEMS

JIG SAW BLADES

Material suitability Version Material Usable

>professional< Holz/wood >>

23634 HCS

Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards, Plastics, 3-30 mm,
For clean cuts

Hard wood, Soft wood, Chipboards,
Wood-core plywood, Fibre boards,
Plastics, 3-30 mm, For clean cuts,
Saw blade with insertion head

Hard wood, Soft wood, Chipboards,
Wood-core plywood, Fibre boards,
Coated boards, 3-30 mm,
For clean cuts

Hard wood, Soft wood, Chipboards,
Wood-core plywood 10-45 mm,
Fibre boards 10-45 mm,
For clean cuts

Clearance angle
ground,
Teeth ground

Clearance angle
ground,
Teeth ground

Clearance angle ground,
Teeth ground,
Reverse toothed

Clearance angle
ground,
Teeth ground

HCS 74 2,5 mm T 101 B 3 6.23961

HCS 74 2,7 mm/ 9 TPI T 101 B 5 6.23969

HCS 74 2,5 mm T 101 BR 5 6.23650

HCS 74 4,0 mm T 101 D 3 6.23962

length
mm

Tooth
pitch

Corresponds
to
Bosch type

Packing
unit

5 6.23634
25 6.23691
100 6.23703

25 6.23608
100 6.23705

5 6.23635
25 6.23609
100 6.23704

Order
no.

Hard wood, Soft wood, Chipboards,
Wood-core plywood 10-45 mm,
Fibre boards 10-45 mm,
For clean cuts,
Saw blade with insertion head

Hard wood, Soft wood, Chipboards,
Wood-core plywood 4-60 mm,
Fibre boards 4-60 mm,
For clean cuts

Hard wood, Soft wood, Doors,
Kitchen worktops 5-50 mm,
For angle-precise cuts,
Extra thick

Hard wood, Soft wood, Chipboards,
Wood-core plywood 5-100 mm,
Fibre boards 5-100 mm,
For angle-precise cuts,
Extra thick

Kitchen worktops,
Hard wood 3-65 mm,
Soft wood 3-65 mm, Doors,
For angle-precise cuts,
Extra thick

Clearance angle
ground,
Teeth ground

Clearance angle
ground,
Teeth ground

Ground, Crossed HCS 74 4,0 mm T 144 DP 5 6.23694

Ground,
Teeth ground

Clearance angle
ground,
Teeth ground

FOR WOOD, "PROFESSIONAL" SERIES, BIM

HCS 74 4-5,2 mm/

6-5 TPI/
progressiv

HCS 91 3,0 mm T 301 CD 5 6.23654

HCS 104 4,0 mm T 344 DP 5 6.23679

HCS 91 2,5 mm T 301 BCP 5 6.23685

T 101 D 5 6.23923

Hard wood, Soft wood,
Coated boards, 5-50 mm,
For quick cuts

Hard wood, Soft wood,
Wood with nails,
Coated boards, 5-50 mm,
For quick cuts,
Saw blade with insertion head

Hard wood, Soft wood,
Coated boards, 5-100 mm,
For quick cuts

200 |

Ground, Crossed BiM 74 4,0 mm T 144 DF 5 6.23976

Ground, Crossed BiM 74 4-5,2 mm/

6-5 TPI/
progressiv

Ground, Crossed BiM 126 4,0 mm T 344 DF 5 6.23980

T 144 DF 5 6.23933

JIG SAW BLADES

Material suitability Version Material Usable

Especially for laminate,
Laminated flooring, Hard wood,
Soft wood, Coated boards,
Plywood, Especially for curved cuts,
For clean cuts

Especially for laminate,
Laminated flooring, Hard wood,
Soft wood, Coated boards,
Plastics, 2-30 mm, For clean cuts

Hard wood, Soft wood,
Laminated flooring,
Coated boards,
Plastics, 3-30 mm,
For clean cuts,
Saw blade with insertion head

Especially for laminate,
Laminated flooring,
Kitchen worktops 3-30 mm,
Coated boards,
For clean cuts

Clearance angle
ground,
Teeth ground,
Ta p er e d

Clearance angle
ground,
Teeth ground,
Ta p er e d

Clearance angle
ground,
Teeth ground

Clearance angle
ground,
Teeth ground,
Reverse toothed

BiM 57 1,4 mm T 101 AOF 5 6.23695

BiM 74 1,7 mm T 101 AIF 5 6.23948

BiM 74 2,7 mm T 101 BF 5 6.23975

BiM 74 2,5 mm T 101 BRF 5 6.23686

length
mm

Tooth
pitch

Corresponds
to
Bosch type

Packing
unit

Order
no.

SAWS

MACHINES

SPECIAL-PURPOSE

SYSTEMATIC

ORGANISATIONGARDEN

Hard wood,
Soft wood,
Coated boards, 4-60 mm

Hard wood, Soft wood,
Chipboards,
Glued woods 5-80 mm,
Fibre glass reinforced
plastics, 5-30 mm,
For quick cuts

Hard wood, Soft wood,
Wood with nails,
Non-ferrous metals, Plastics

FOR WOOD, "PIONEER" SERIES

Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards,
For quick cuts

UNIVERSAL, "PIONEER" SERIES

Wood, Wood with nails,
Metal, Non-ferrous metals,
Plastics

FOR METAL, "CLASSIC" SERIES

Clearance angle
ground,
Teeth ground

Clearance angle
ground,
Teeth ground

Ground BiM 90 2,5 mm T 111 HF 5 6.23949

Clearance angle
ground,
Teeth ground

Crossed, Milled BiM 106 2,4-5,0 mm,

BiM 91 3,0 mm T 301 CDF 5 6.23696

BiM 105 3,0 mm T 301 CLF 5 6.23977

HCS 91 2,0-3,0 mm,

progressiv

progressiv

T 234 X 5 6.23675

25 6.23617

T 345 XF 5 6.23677

25 6.23621

TECHNOLOGY

WOOD-PROCESSING

TECHNOLOGY

WATER-/PUMP

Sheet steel, 0.5-1.5 mm,
Non-ferrous metals

Sheet steel, 1-3 mm,
Non-ferrous metals

Sheet steel, 1-3 mm,
Non-ferrous metals,
Especially for curved cuts

Milled, Crimped HSS 66 0,7 mm T 118 G 3 6.23967

5 6.23636
25 6.23693

Milled, Crimped HSS 51 1,2 mm T 118 A 3 6.23965

5 6.23637
25 6.23692
100 6.23706

Milled, Crimped HSS 51 1,2 mm T 218 A 5 6.23647

| 201

WELDING

COMPRESSED

TECHNOLOGY

AIR SYSTEMS

JIG SAW BLADES

Material suitability Version Material Usable

Sheet steel, 1-3 mm,
Non-ferrous metals,
Saw blade with insertion head

Sheet steel, 1-3 mm,
Non-ferrous metals,
Especially for curved cuts,
Saw blade with insertion head

Sheet steel, 1-3 mm,
Non-ferrous metals,
sandwich materials

Sheet steel, 2.5-6 mm,
Non-ferrous metals

Sheet steel, 2.5-6 mm,
Non-ferrous metals,
Saw blade with insertion head

Milled, Crimped HSS 66 1,1-1,5 mm/

Milled, Crimped HSS 66 1,1-1,5 mm/

Milled, Crimped HSS 106 1,2 mm T 318 A 5 6.23629

Milled, Crimped HSS 51 2,0 mm T 118 B 5 6.23638

Milled, Crimped HSS 66 1,9-2,3 mm/

length
mm

Tooth
pitch

23-17 TPI/
progressiv

23-17 TPI/
progressiv

13-11 TPI/
progressiv

Corresponds
to
Bosch type

T 118 A 5 6.23924

T 218 A 5 6.23926

T 118 B 5 6.23925

Packing
unit

25 6.23623
100 6.23716

25 6.23618
100 6.23707

Order
no.

Sheet steel, 2.5-6 mm,
Non-ferrous metals

Milled, Crimped HSS 106 2,0 mm T 318 B 5 6.23697

FOR METAL, "PROFESSIONAL" SERIES

Sheet steel, 1-3 mm,
Non-ferrous metals

Sheet steel, 1-3 mm,
Non-ferrous metals,
Saw blade with
insertion head

Sheet steel, 1-3 mm,
Sandwich materials 2-65 mm,
Non-ferrous metals, Plexiglas

Sheet steel, 2.5-6 mm,
Sandwich materials 2-65 mm,
Non-ferrous metals, Plexiglas

Sheet steel, 1.5 4 mm,
Especially for curved cuts

Milled, Crimped BiM 57 1,2 mm T 118 AF 5 6.23971

Milled, Crimped BiM 66 1,1-1,5 mm/

Milled, Crimped BiM 106 1,1 mm T 318 AF 5 6.23978

Milled, Crimped BiM 106 1,8 mm T 318 BF 5 6.23979

Milled, Crimped BiM 57 1,5 mm T 118 EOF 5 6.23970

100 6.23708

T 118 AF 5 6.23950
23-17 TPI/
progressiv

Sheet steel, 2.5-6 mm,
Non-ferrous metals

Sheet steel, 2.5-6 mm,
Non-ferrous metals,
Saw blade with
insertion head

Sheet steel, 2.5-6 mm,
Sandwich materials 2-120 mm,
Non-ferrous metals, Plexiglas

Sheet steel, 2-5 mm,
Non-ferrous metals

202 |

Milled, Crimped BiM 57 2,0 T 118 BF 5 6.23973

Milled, Crimped BiM 66 1,9-2,3 mm/

13-11 TPI/
progressiv

Milled, Crossed BiM 150 2,0 mm T 718 BF 5 6.23604

Milled, Crimped BiM 50 1,5 mm T 118 EF 5 6.23972

T 118 BF 5 6.23929

JIG SAW BLADES

Material suitability Version Material Usable

length
mm

FOR METAL, "PIONEER" SERIES

Sheet steel, 1.5-10 mm,
Non-ferrous metals up to 30 mm

Milled, Crossed HSS 74 1,4 - 2,6 mm,

FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES

Aluminium 3-15 mm,
Non-ferrous metals 4 -20 mm,
Plastics,
For quick cuts

Aluminium 3-15 mm,
Non-ferrous metals 4 -20 mm,
Especially for curved cuts

Aluminium 3-15 mm,
Non-ferrous metals 4 -20 mm,
Plastics, For quick cuts

Milled, Crossed HSS 74 3,0 mm T 127 D 5 6.23639

Milled, Crossed HSS 74 3,0 mm T 227 D 5 6.23648

Milled, Crossed BiM 75 3,0 mm T 127 DF 5 6.23974

FOR STAINLESS STEEL, "EXPERT" SERIES

Tooth
pitch

progressiv

Corresponds
to
Bosch type

T 123 X 5 6.23676

Packing
unit

25 6.23620

25 6.23622
100 6.23709

Order
no.

SAWS

MACHINES

SPECIAL-PURPOSE

SYSTEMATIC

ORGANISATIONGARDEN

Stainless steel sheets (Inox) 1-2 mm,
Non-ferrous metals

Stainless steel sheets (Inox) 2-4 mm,
Non-ferrous metals

Ground carbide 57 1,1 mm T 118 AHM 3 6.23662

Ground carbide 57 1,4 mm T 118 EHM 3 6.23663

FOR PLASTICS, "EXPERT" SERIES

Fibre glass reinforced plastics,
Corian 4-60 mm

Ground carbide 91 3,3 mm T 301 CHM 3 6.23687

FOR GYPSUM CARTON/CEMENT MATERIALS, "EXPERT" SERIES

Gypsum plaster,
Cement fibre boards 5-50 mm,
Fibre glass reinforced
plastics, 5-20 mm,

Gypsum plaster,
Cement fibre boards 5-80 mm,
Fibre glass reinforced
plastics, 5-50 mm,

Ground carbide 74 4,3 mm T 141 HM 1 6.23652

Ground carbide 106 4,3 mm T 341 HM 1 6.23688

FOR PLEXIGLAS, "EXPERT" SERIES

Plexiglas, Polycarbonate 2-20 mm,
Non-ferrous metals 2 -10 mm

Clearance angle ground,
Teeth ground

HSS 74 2,0 mm T 101 A 5 6.23640

FOR SOFT MATERIALS, "EXPERT" SERIES

3 6.23671

TECHNOLOGY

WOOD-PROCESSING

TECHNOLOGY

WATER-/PUMP

Expanded polystyrene, Cardboard,
Leather, Rubber, Carpet up to 50 mm

Expanded polystyrene, Cardboard,
Leather, Rubber, Carpet up to 50 mm

Knife-blade ground,
Straight

Knife-blade ground,
Crimped

FOR CERAMIC MATERIALS, "EXPERT" SERIES

Ceramic, Glass,
Fibre glass reinforced plastics,
Cast iron

Ceramic, Glass,
Fibre glass reinforced plastics,
Cast iron

Coarse Carbide,

Fine Carbide,

HCS 74 T 113 A 5 6.23641

HCS 126 T 313 AW 3 6.23684

76 - T 130 Riff 1 6.23657

coated

76 - T 150 Riff 1 6.23658

coated

| 203

WELDING

COMPRESSED

TECHNOLOGY

AIR SYSTEMS

JIG SAW BLADES

Jig saw blades with Fein shank

Suitable for FEIN jig saws

Material suitability Version Material Usable

FOR WOOD, "PROFESSIONAL" SERIES

length
mm

Tooth
pitch

Corresponds

to

Bosch type

Packing
unit

Order
no.

Hard wood, Soft wood,
Chipboards, Wood-core plywood,

Clearance angle ground,
Teeth ground

HCS 60 3,0 mm F 1 C 5 6.23992

Fibre boards 10-40 mm

Hard wood, Soft wood,
Wood-core plywood,

Clearance angle ground,
Teeth ground

HCS 60 4,0 mm F 1 D 5 6.23993

Fibre boards 10-40 mm

FOR METAL, "CLASSIC" SERIES

Sheet steel, 0.5-1.5 mm Milled, Crimped HSS 50 0,7 mm F 18 G 5 6.23996

FOR METAL, "PROFESSIONAL" SERIES

Sheet steel, 1-3 mm Milled, Crimped BiM 60 1,2 mm F 18 AF 5 6.23994

Sheet steel, 2.5-6 mm,

Milled, Crimped BiM 60 2,0 mm F 18 BF 5 6.23995

Plastics

FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES

Aluminium,
Non-ferrous metals 3-15 mm,
Pipes up to 30 mm,
Profiles up to 30 mm

Jig saw blades with universal shank

Suitable for Black & Decker, Skil, Kress and others

Material suitability Version Material Usable

Milled, Crossed BiM 75 3,0 mm F 127 DF 5 6.23997

Packing
unit

length
mm

Tooth pitch Corre-

sponds
to Bosch
type

FOR WOOD, "CLASSIC" SERIES

Order
no.

Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 5-50 mm,
For clean cuts

FOR WOOD, "PROFESSIONAL" SERIES

Hard wood, Soft wood,
Chipboards,
Wood-core plywood,
Fibre boards 5-50 mm

Hard wood, Soft wood,
Plywood,
Coated boards, 1.5-15 mm,
Especially for curved cuts

Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 10-45 mm,
For clean cuts

Hard wood, Soft wood, Chipboards,
Wood-core plywood, Fibre
boards 10-45 mm, For clean cuts

204 |

Milled, Crossed HCS 74 3,0 mm U 111 C 5 6.23945

Ground, Crossed HCS 82 4,0 mm U 144 D 5 6.23944

Clearance angle ground,

HCS 52 1,3 mm U 1 AO 5 6.23936

Ta p er e d

Clearance angle ground,

HCS 82 2,5 mm U 101 B 5 6.23943

Teeth ground

Clearance angle ground,

HCS 82 4,0 mm U 101 D 5 6.23942

Teeth ground

JIG SAW BLADES

Material suitability Version Material Usable

length
mm

FOR WOOD, "PROFESSIONAL" SERIES, BIM

Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 5-50 mm,
For quick cuts

Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 3-30 mm,
Coated boards,
For clean cuts

Ground, Crossed BiM 74 4,0 mm U 144 DF 5 6.23904

Clearance angle ground,
Teeth ground

BiM 82 2,5 mm U 101 BF 5 6.23905

FOR WOOD, "PIONEER" SERIES

Hard wood, Soft wood, Chipboards,
Wood-core plywood,
Fibre boards 2-65 mm,
For quick cuts

Clearance angle ground,
Teeth ground

HCS 90 2,0-3,0 mm,

FOR WOOD AND METAL, "PIONEER" SERIES

Wood, Wood with nails,
Metal, Non-ferrous metals,
Plastics

Milled, Crossed BiM 107 2,4 - 5,0 mm,

FOR METAL, "CLASSIC" SERIES

Tooth pitch Corre-

sponds
to Bosch
type

U 234 X 5 6.23903

progressiv

U 345 XF 5 6.23906

progressiv

Packing
unit

Order
no.

SAWS

MACHINES

SPECIAL-PURPOSE

SYSTEMATIC

ORGANISATIONGARDEN

Sheet steel, 0.5-1.5 mm Milled, Crimped HSS 52 0,7 mm U 118 G 5 6.23938

Sheet steel, 1-3 mm Milled, Crimped HSS 52 1,2 mm U 118 A 5 6.23941

Sheet steel, 2.5-6 mm Milled, Crimped HSS 52 2,0 mm U 118 B 5 6.23940

FOR METAL, "PROFESSIONAL" SERIES

Sheet steel, 1-3 mm Milled, Crimped BiM 52 1,2 mm U 118 AF 5 6.23907

Sheet steel, 2.5-6 mm Milled, Crimped BiM 74 2,0 mm U 118 BF 5 6.23937

FOR METAL, "PIONEER" SERIES

Sheet steel, 1.5-10 mm,
Pipes, Profiles up to 30 mm

Milled, Crossed HSS 74 1,2 - 2,6 mm,

progressiv

U 123 X 5 6.23909

FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES

Aluminium, Non-ferrous
metals 3-15 mm, Pipes,
Profiles up to 30 mm

Milled, Crossed HSS 74 3,0 mm U 127 D 5 6.23939

TECHNOLOGY

WOOD-PROCESSING

TECHNOLOGY

WATER-/PUMP

| 205

WELDING

COMPRESSED

TECHNOLOGY

AIR SYSTEMS

JIG SAW BLADES

Jig saw blades with Makita shank

Suitable for Makita jigsaws

Material suitability Version Material Usable

FOR WOOD, "CLASSIC" SERIES

length
mm

Tooth
pitch

Corres­ponds to
Bosch
type

Packing
unit

Order
no.

Soft wood, Plywood, Chipboards,
Wood-core plywood,
Fibre boards 3-15 mm,
Especially for curved cuts

Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 4-50 mm,
For rough cuts

Milled, Crossed HCS 62 2,5 mm MA 119 HO 5 6.23958

Milled, Crossed HCS 62 3,0 mm MA 111 C 5 6.23955

FOR WOOD, "PROFESSIONAL" SERIES

Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 4-50 mm,
For quick cuts

Hard wood, Soft wood,
Chipboards,
Wood-core plywood,
Fibre boards, Plastics, 3-30 mm,
For clean cuts

Ground, Milled HCS 82 3,0 mm MA 144 CD 5 6.23919

Clearance angle
ground,
Teeth ground

FOR WOOD, "PIONEER" SERIES

Hard wood, Soft wood,
Chipboards,
Wood-core plywood,
Fibre boards 2-65 mm,
For quick cuts, For clean cuts

Clearance angle
ground,
Teeth ground

FOR WOOD AND METAL, "PIONEER" SERIES

HCS 62 2,7 mm MA 101 BC 5 6.23959

HCS 92 progressiv,

2,0-3,0 mm

MA 234 X 5 6.23911

Wood, up to 65 mm,
Wood with nails, Metal sheets,
Pipes, Aluminium,
Plastics, 3-10 mm

Milled, Crossed BiM 102 progressiv,

2,5-5,0 mm

MA 345 XF 5 6.23912

FOR METAL, "CLASSIC" SERIES

Sheet steel, 1-3 mm Milled, Crimped HSS 62 1,0 mm MA 118 A 5 6.23957

Sheet steel, 2.5-6 mm, Milled, Crimped HSS 62 1,8 mm MA 118 B 5 6.23956

FOR METAL, "PROFESSIONAL" SERIES

Sheet steel, 1-3 mm Milled, Crimped BiM 62 1,0 mm MA 118 AF 5 6.23916

Sheet steel, 2.5-6 mm Milled, Crimped BiM 62 1,8 mm MA 118 BF 5 6.23917

FOR METAL, "PIONEER" SERIES

Sheet steel, 1-10 mm, Pipes,
Profiles up to 30 mm

Milled, Crossed HSS 77 progressiv,

1,0-2,6 mm

MA 123 X 5 6.23914

FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES

Aluminium, Non-ferrous
metals 3 -15 mm, Pipes,
Profiles up to 30 mm

206 | 206 |

Milled, Crossed HSS 62 3,0 mm MA 127 D 5 6.23918