DRILLS
ENGINEERING
RESULTS FOR
INDUSTRIAL
NEEDS.
The Metabo rotary drill range is designed and built to meet the needs of the industrial world. Be it for applications in wood, metal, plastic, liquids, ceramic or masonry Metabo has a drill in the range to suit. This versatility results from the use of quality components, high manufacturing tolerances and high quality standards throughout the manufacturing process. With a Metabo you can be sure it will deliver engineering results demanded by industry. Metabo. Work. Don’t play.
92 |
DRILLS
| 93
DRILLS
ROTARY ONLY – FOR THE SPECIALIST.
Rotary only drills are usually considered as specialist machines, however Metabo‘s vast range can cover a whole host of applications. This class are in their element for high tolerance drilling in wood, plastic and metal. Small high speed models come into their own for those
repetitive small jobs where as high torque models are ideal for use with diamond cores, torque screws, augers and paddles etc. Whatever the application, with Metabo you will always find the right machine for the job.
Infinitely variable speed control
For setting the ideal speed without problems.
Marathon motor with coil guard
Expertly machined and balanced motors use high grade coppers and steels, increase efficiency and provide optimum performance. Thick resin coatings on the armature and field coil protect the motor from harmful debris, increasing service life.
Metabo S-automatic torque limiting clutch
Prevents sudden reverse kick back if a disc or bit should jam in the work piece - protecting machine and user.
Die cast aluminium gear housing
Metal gear housings ensure optimum integral machine strength and maximum heat dissipation which aids motor cooling and prolongs service life.
Hexagon socket in the spindle
The screwdriver bit can be inserted directly into the spindle.
Metabo quick-action |
keyless chuck |
Simple and fast tool |
change without key. |
Special areas of application |
Special areas of application |
Ergonomic design |
Even when working at places difficult |
Drills with high torque are not only |
Ideal adaptation of the design |
to reach, Metabo drills can be used |
suitable simply for drilling, but can |
to the user’s needs that enables safe, |
without problems. |
also be used for stirring thick fluids |
comfortable and fatigue-free work. |
|
such as gypsum, joint fillers, ready- |
|
|
made plaster or tile adhesive. |
|
94 |
DRILLS
Which drill for which application?
|
Drilling |
Inserting screws, stirring |
|
|
Type and output |
Page |
|
|
|
|
|
|
|
|
Pilot drilling of riveted joints, aluminium and |
|
|
|
BE 4006 |
96 |
|
thin sheet metal, pilot drilling of wood, |
|
|
|
400 Watts |
|
|
kitchen installation |
|
|
|
|
|
|
Nail holes in strips |
|
|
|
|
|
|
|
|
|
|
|
|
|
Wood – small diameter |
Light screwing applications |
|
|
BE 4010 |
96 |
|
Vehicle body manufacture |
|
|
|
400 Watts |
|
|
Steel and cast iron |
|
|
|
|
|
|
Inox profiles, pipes and sheets |
|
|
|
|
|
|
|
|
|
|
|
|
|
Wood – smaller diameter |
|
|
|
B 561 |
96 |
|
|
NEW |
|
|||
|
Vehicle body manufacture |
|
|
560 Watts |
|
|
|
|
|
|
|
||
|
Steel and cast iron |
|
|
|
|
|
|
Sheet metal, switch cabinet manufacture |
|
|
|
|
|
|
|
|
|
|
|
|
|
Wood – smaller diameter |
Light screwing applications |
|
|
BE 561 |
96 |
|
NEW |
|
||||
|
Vehicle body manufacture |
|
|
560 Watts |
|
|
|
|
|
|
|
||
|
Steel and cast iron |
|
|
|
|
|
|
Sheet metal, switch cabinet manufacture |
|
|
|
|
|
|
|
|
|
|
|
|
|
Drilling of stainless steel installations |
Screwing applications |
|
|
BE 622 S-R+L |
97 |
|
(counter construction) |
Stirring of paint (painters) |
|
|
620 Watts |
|
|
Drilling with auger bits and forstner pattern bits |
Stirring of viscous fluids |
|
|
|
|
|
|
|
|
|
|
|
|
Steel (mechanical engineering, |
Screwing applications |
|
|
BE 710 |
97 |
|
scaffolding manufacture, locks) |
Stirring of paint |
|
|
710 Watts |
|
|
Wood (carpenters, joiners, interior decorators) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Ceramic, tiles (building services, plumbers) |
Screwing applications |
|
|
BE 1020 |
97 |
|
Application with drill stand |
Stirring of paint |
|
|
1.020 Watts |
|
|
Service and assembly applications |
Application as driving unit |
|
|
|
|
|
|
|
|
|
|
|
|
Steel – large diameter |
Stirring of paint |
|
|
BDE 1100 |
98 |
|
Wood – extremely large diameter |
Stirring of viscous fluids |
|
|
1.100 Watts |
|
|
|
Diamond Core drilling |
|
|
|
|
|
|
|
|
|
|
|
|
Kitchen installation |
|
|
|
WBE 700 |
98 |
|
Mechanical engineering |
|
|
|
705 Watts |
|
|
Assembly work (furniture, locksmiths, fitters) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stirring of viscous fluids: |
|
|
RWE 1100 |
99 |
|
|
Gypsum, filler compound, tile adhesive, joint filler, |
1.100 Watts |
|
||
|
|
mortar, ready-made plaster (painters, plasterers, |
|
|
||
|
|
bricklayers) |
|
|
|
|
|
|
|
|
|
|
|
|
Steel – large diameter |
Screws (long screws with large drilling |
|
|
B 32/3 |
100 |
|
NEW |
|
||||
|
Wood –large diameter |
diameter, e.g. frames and facade pegs) |
|
1.800 Watts |
|
|
|
|
|
|
|||
|
Form work drill bit |
Stirring of viscous fluids |
|
|
|
|
|
|
|
|
|
|
|
|
Drilling and hollow milling in steel substructures |
|
|
|
MAG 832 |
101 |
|
(mechanical engineering) |
|
|
|
800 Watts |
|
|
Drilling of steel carriers |
|
|
|
|
|
|
|
|
|
|
|
|
|
Stationary drilling in wood, wood-like |
|
|
|
TB E 4512 |
102 |
|
materials, plastic and metal |
|
|
|
700 Watts |
|
|
|
|
|
|
TB E 5014 |
|
|
|
|
|
|
800 Watts |
|
|
|
|
|
|
|
|
METAL PROCESORS ANGLE GRINDERS
HAMMERS
IMPACT DRILLS
DRILLS
WOOD SANDING MACHINES SCREWDRIVERS
ROUTERS AND PLANERS
| 95
DRILLS
COMMON FEATURES |
COMMON FEATURES |
Compact, lightweight machine with special cup housing design
Small, handy bench machine
Ergonomic housing design with large trigger button User-friendly guidance of machine exhaust in all working situations
Variospeed (V) electronics Long-life motor
Clockwise and anticlockwise rotation Quick-action keyless chuck Futuro Plus
Spindle with hexagon recess for screwdriver bits
Small, handy bench machine Sturdy double-shell housing
Ergonomic housing design with large trigger button Long-life motor
Spindle with hexagon recess for screwdriver bits Rubber-coated handle
|
BE 4006 |
|
BE 4010 |
|
|
|
|
|
|
|
|
400 Watt |
400 Watt |
|
|
|
Electronic |
Electronic |
|
|
|
|
Drill |
Drill |
|
|
BE 4006 |
BE 4010 |
|
|
|
|
|
|
|
|
|
|
|
|
B 561 |
|
BE 561 |
|
|
NEW |
|
NEW |
|
|
|
|
|
|
|
|
|
560 Watt |
560 Watt |
|
|
|
Drill |
Electronic |
|
|
|
B 561 |
Drill |
|
|
|
|
BE 561 |
|
|
|
|
|
|
|
|
|
|
Comparative |
|
|
device characteristics |
|
|
Torque |
6 Nm |
8 Nm |
Drilling capacity in |
|
|
- Steel |
6 mm |
10 mm |
- Softwood |
12 mm |
20 mm |
No load speed |
0 - 4.000 /min |
0 - 2.850 /min |
Rated input power |
400 W |
400 W |
Output power |
220 W |
220 W |
Rated load speed |
2.400 /min |
1.800 /min |
Collar diameter |
|
|
Drilling spindle thread |
1/2" - 20 UNF |
1/2" - 20 UNF |
Chuck capacity |
1 - 10 mm |
1 - 10 mm |
Drilling spindle with hexagon |
1/4" (6,35 mm) |
1/4" (6,35 mm) |
recess |
|
|
Weight (without mains cable) |
1,2 kg |
1,2 kg |
Standard equipment |
Quick-action |
Quick-action |
|
keyless chuck |
keyless chuck |
|
Futuro Plus |
Futuro Plus |
|
|
|
Type |
BE 4006 |
BE 4010 |
Order no. |
6.00554 |
6.00555 |
|
|
|
Special advantages |
|
|
Variospeed (V) electronics |
|
|
Thumbwheel for |
|
|
preselection of speed |
|
|
Clockwise and |
|
|
anticlockwise rotation |
|
|
Comparative |
|
|
device characteristics |
|
|
Torque |
5 Nm |
5 Nm |
Drilling capacity in |
|
|
- Steel |
10 mm |
10 mm |
- Softwood |
20 mm |
20 mm |
No load speed |
2.800 /min |
0 - 2.800 /min |
Rated input power |
560 W |
560 W |
Output power |
320 W |
320 W |
Rated load speed |
1.700 /min |
1.700 /min |
Collar diameter |
43 mm |
43 mm |
Drilling spindle thread |
1/2" - 20 UNF |
1/2" - 20 UNF |
Chuck capacity |
1 - 10 mm |
1 - 10 mm |
Drilling spindle with hexagon |
|
1/4" (6,35 mm) |
recess |
|
|
Weight (without mains cable) |
1,7 kg |
1,7 kg |
|
|
|
Type |
B 561 |
BE 561 |
Order no. Machine with |
– |
6.01162.82 |
– Quick-action keyless chuck Futuro Plus |
||
– Geared chuck and chuck key |
6.01161 |
6.01162.00 |
|
|
|
96 |
DRILLS
EQUIPMENT FEATURES |
COMMON FEATURES |
Die cast aluminium gear housing Variospeed (V) electronics
Metabo S-automatic torque limiting clutch Clockwise and anticlockwise rotation Geared chuck
Spindle with hexagon recess for screwdriver bits Suitable for drilling with drill bits with large diameter (e.g. formwork drill bits) and for stirring thick liquid-like materials
High torque
Long side handle for work with high torque Auto-stop carbon brushes
Die cast aluminium gear housing Optimal cooling by axial/radial fan
Ergonomic housing design with large trigger button Thumbwheel for preselection of speed
Two-speed gear unit
Robust Metabo Marathon motor
Metabo S-automatic torque limiting clutch Metabo winding protection grid Clockwise and anticlockwise rotation
Spindle with hexagon recess for screwdriver bits Auto-stop carbon brushes
|
B E 622 S- R+L |
|
|
|
BE 710 |
|
BE 1020 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
620 Watt |
|
|
|
710 Watt |
1020 Watt |
||
|
|
Electronic Drill |
|
|
|
Electronic |
Electronic |
||
|
|
B E 622 S- R+L |
|
|
|
Two-Speed |
Two-Speed |
||
|
|
|
|
|
|
|
Drill |
|
Drill |
|
|
|
|
|
|
BE 710 |
BE 1020 |
||
|
|
|
|
|
|
|
|
|
|
METAL PROCESORS ANGLE GRINDERS
HAMMERS
IMPACT DRILLS
Comparative device characteristics |
|
|
Special advantages |
|
|
|
|
Torque |
35 Nm |
|
Variospeed (V) electronics |
|
|
|
DRILLS |
Drilling capacity in |
|
|
Vario Tacho Constamatic |
|
|
|
|
|
|
|
|
|
|
||
- Steel |
16 mm |
|
(VTC) full-wave electronics |
|
|
|
|
- Softwood |
40 mm |
|
High torque |
|
|
|
|
No load speed |
0 - 550 /min |
|
Overload protection |
|
|
|
|
Rated input power |
620 W |
|
No-volt release switch |
|
|
|
|
Output power |
360 W |
|
Brush wear indicator |
|
|
|
|
Rated load speed |
330 /min |
|
|
|
|
|
|
Collar diameter |
43 mm |
|
Comparative |
0 - 1.000 / |
0 - 900 / |
|
SCREWDRIVERS |
Drilling spindle thread |
1/2" - 20 UNF |
|
No load speed |
|
|||
|
device characteristics |
|
|
|
|
||
Chuck capacity |
1,5 - 13 mm |
|
Torque |
16 Nm/6 Nm |
28 Nm/10 Nm |
|
|
Drilling spindle with hexagon |
1/4" (6,35 mm) |
|
Drilling capacity in |
|
|
|
|
recess |
|
|
- Steel |
13 mm/8 mm |
16 mm/8 mm |
|
|
Weight (without mains cable) |
2,1 kg |
|
- Softwood |
40 mm/25 mm |
40 mm/25 mm |
|
|
Standard equipment |
Geared chuck, chuck key, |
|
|
0 - 3.000 /min |
0 - 2.600 /min |
|
|
|
long side handle |
|
Rated input power |
710 W |
1.020 W |
|
|
|
|
|
Output power |
420 W |
620 W |
|
|
|
|
|
Rated load speed |
560/1.700 /min |
900/2.600 /min |
SANDINGWOOD |
MACHINES |
|
|
|
Weight (without mains cable) |
2,2 kg |
2,3 kg |
||
|
|
|
Collar diameter |
43 mm |
43 mm |
|
|
|
|
|
Drilling spindle thread |
1/2" - 20 UNF |
1/2" - 20 UNF |
|
|
|
|
|
Chuck capacity |
1,5 - 13 mm |
1,5 - 13 mm |
|
|
|
|
|
Drilling spindle with hexagon |
1/4" |
1/4" |
|
|
|
|
|
recess |
(6,35 mm) |
(6,35 mm) |
|
|
|
|
|
Standard equipment |
Side handle |
Long side |
|
|
|
|
|
|
|
handle |
|
|
|
|
|
|
|
|
ROUTERS |
ANDPLANERS |
Order no. |
6.00626 |
|
Order no. Machine with |
BE 710 |
BE 1020 |
||
Type |
B E 622 S- R+L |
|
Type |
|
|
||
|
|
|
– Quick-action keyless chuck Futuro Plus |
6.00830.91 |
– |
|
|
|
|
|
– Geared chuck and chuck key |
6.00830.00 |
6.00831.00 |
|
|
|
|
|
|
|
|
|
|
| 97
DRILLS
EQUIPMENT FEATURES
Die cast aluminium gear housing Variospeed (V) electronics Two-speed gear unit
Metabo S-automatic torque limiting clutch Clockwise and anticlockwise rotation Geared chuck
Suitable for drilling with drill bits with large diameter (e.g. formwork drill bits) and for stirring thick liquid-like materials
High torque
Comfortable operation and safety through auxiliary handle Auto-stop carbon brushes
|
BDE 1100 |
|
|
|
|
|
|
1100 Watt |
|
|
Electronic |
|
Two-Speed Drill |
|
|
|
BDE 1100 |
|
|
|
Comparative |
|
|
device characteristics |
|
|
Torque |
55 Nm/22 Nm |
|
Drilling capacity in |
|
|
- Steel |
16 mm/10 mm |
|
- Softwood |
40 mm/25 mm |
|
No load speed |
0 - 640 / 0 - 1.200 /min |
|
Rated input power |
|
1.100 W |
Output power |
|
620 W |
Rated load speed |
430/800 /min |
|
Collar diameter |
|
43 mm |
Drilling spindle thread |
|
5/8" - 16 UN |
Chuck capacity |
|
3 - 16 mm |
Weight (without mains cable) |
|
3,8 kg |
Standard equipment |
Geared chuck, chuck key, |
|
|
long side handle, |
|
|
drilling depth guide |
|
|
|
|
Type |
|
BDE 1100 |
Order no. |
6.00806 |
|
|
|
|
EQUIPMENT FEATURES
Die cast aluminium gear housing
Vario Constamatic (VC) full-wave electronics
Thumbwheel for preselection of speed
Geared chuck
Especially suitable for working in places difficult to reach
Auto-stop carbon brushes
WBE 700
|
705 Watt |
|
Electronic |
|
Angle Drill |
|
WBE 700 |
|
|
Comparative |
|
device characteristics |
|
Torque |
8 Nm |
Drilling capacity in |
|
- Steel |
10 mm |
- Softwood |
25 mm |
No load speed |
850 - 2.050 /min |
Rated input power |
705 W |
Output power |
430 W |
Rated load speed |
1.500 /min |
Drilling spindle thread |
1/2" - 20 UNF |
Chuck capacity |
1 - 10 mm |
Weight (without mains cable) |
1,8 kg |
Standard equipment |
Geared chuck, chuck key, |
|
side handle |
Type |
WBE 700 |
Order no. |
6.00512 |
|
|
98 |
STIRRERS
EQUIPMENT FEATURES
Ideal stirring and mixing device for tough permanent use for plastering, painting and brickwork
Suitable for stirring thick liquid-like materials Die cast aluminium gear housing
Comfortable operation and safety through auxiliary handle Variospeed (V) electronics
Soft start
Quick change adapter (accessory)
RWE 1100
|
1100 Watt |
|
Electronic |
|
Stirrer |
|
RWE 1100 |
|
|
Comparative |
|
device characteristics |
|
Torque |
45 Nm |
Maximum stirring basket diameter |
160 mm |
No load speed |
0 - 700 /min |
Rated input power |
1.100 W |
Output power |
660 W |
Rated load speed |
480 /min |
Collar diameter |
43 mm |
Bit retainer |
M 14 female thread |
Weight (without mains cable) |
3,4 kg |
Standard equipment |
Side handle, without adapter |
Type |
RWE 1100 |
Order no. |
6.01111 |
|
|
ACCESSORIES FOR THE STIRRERS
|
|
|
|
|
|
|
|
GRINDERS |
Agitator paddles with M14 MThr |
|
|
|
|
||||
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diameter |
Length |
Maximum |
Maximum |
Order |
|
ANGLE |
||
mm |
mm |
quantity kg |
/min |
no. |
|
|||
material |
speed |
|
|
|||||
|
|
|
|
|
|
|
||
Type RS 2, mixing effect from top to bottom |
|
|
|
|
|
|||
Paint, Varnish, Cement slurry/finished mortar |
|
|
|
|
PROCESORS |
|||
140 |
600 |
|
30 - 60 |
500 - 700 |
6.31951 |
|
|
|
110 |
600 |
|
15 - 40 |
500 - 700 |
6.31950 |
|
|
|
|
|
|
|
|
|
|
|
METAL |
Type RS 3, mixing effect from top to bottom |
|
|
|
|
||||
|
|
|
|
|
||||
Plaster, Mortar, Filler compound, |
|
|
|
|
|
|||
Thermal insulation materials |
|
|
|
|
|
|
||
100 |
600 |
|
10 - 25 |
500 - 700 |
6.31952 |
|
|
HAMMERS |
130 |
600 |
|
20 - 50 |
500 - 700 |
6.31953 |
|
|
|
|
|
|
|
|||||
160 |
600 |
|
30 - 150 |
500 - 700 |
6.31954 |
|
|
|
Type RS 3, mixing effect from bottom to top |
|
|
|
|
|
|||
Plaster, Mortar, Filler compound, |
|
|
|
|
|
|||
Thermal insulation materials |
|
|
|
|
|
|
||
100 |
600 |
|
10 - 25 |
500 - 700 |
6.31963 |
|
|
DRILLS |
|
|
|
|
|||||
130 |
600 |
|
20 - 50 |
500 - 700 |
6.31964 |
|
|
|
160 |
600 |
|
30 - 150 |
500 - 700 |
6.31965 |
|
|
IMPACT |
Type RS 4, mixing effect from bottom to top |
|
|
|
|
||||
|
|
|
|
|
||||
2-component materials |
|
|
|
|
|
|
||
100 |
600 |
|
10 - 20 |
500 - 700 |
6.31955 |
|
|
|
|
|
|
|
|||||
130 |
600 |
|
20 - 30 |
500 - 700 |
6.31956 |
|
|
|
160 |
600 |
|
30 - 150 |
500 - 700 |
6.31957 |
|
|
DRILLS |
Type RS 8 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Liquids, Granules, Float finish |
|
|
|
|
|
|||
120 |
600 |
|
35 - 70 |
500 - 700 |
6.31958 |
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
||
Connectors with M14 FThr |
|
|
|
|
SCREWDRIVERS |
|||
For machines with other spindle holders |
|
|
|
|
||||
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Order |
|
|
|
|
|
|
|
|
no. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Holder: 1/2" -20 UNF, |
6.31959 |
|
|
|
|
|
|
|
M 14 female thread |
|
|
|
|
|
|
|
|
Holder: 5/8"- 16 UN, |
6.31960 |
|
|
|
|
|
|
|
M 14 female thread |
|
|
SANDINGWOOD |
MACHINES |
|
|
|
|
Holder: M 14 male thread, |
6.31961 |
|
|||
|
|
|
|
|
|
|||
|
|
|
M 14 female thread |
|
|
|
|
|
|
|
|
Holder: M 18 |
|
6.31962 |
|
|
|
|
|
|
male thread, |
|
|
|
|
|
|
|
|
M 14 female thread |
|
|
|
|
|
|
|
|
Holder: B 16 |
|
6.31969 |
|
|
|
|
|
|
male thread, |
|
|
|
|
|
|
|
|
M 14 female thread |
|
|
|
|
|
|
|
|
|
|
|
|
||
Quick change adapter |
|
|
|
|
|
PLANERSAND |
||
|
|
|
|
|
|
|
ROUTERS |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
Order |
|||
|
|
|
|
|
|
|
||
|
|
|
|
|
no. |
|
|
|
|
|
|
|
|
|
|||
|
for easily removing or fitting the |
6.31966 |
|
|
|
|||
|
agitator paddle for cleaning or |
|
|
|
|
|||
|
replacement purposes |
|
|
|
|
|
| 99
DRILLS
EQUIPMENT FEATURES
Powerful three-speed drill with extra high torque for difficult drilling work, including into steel Robust mechanical gearbox with oil bath lubrication Die cast aluminium gear housing
Torque limiting clutch
Suitable for drilling with drill bits with large diameter (e.g. formwork drill bits), for stirring thick liquid-like materials and for screwing in long screws with large diameter (e.g. in frame and facade pegs)
High torque
Long side handle for work with high torque
ACCESSORIES FOR THE B 32/3 DRILL
Taper arbors for chucks
Hardened and ground
For chuck with taper socket
According to DIN 238
Outer |
Chuck taper |
Overall taper |
Weight |
Order |
morse |
|
arbor length |
kg |
no. |
taper Ø |
|
mm |
|
|
|
|
|
|
|
MK 3 |
B 16 |
134 |
0,31 |
6.35125 |
MK 3 |
B 18 |
141 |
0,32 |
6.35126 |
MK 3 |
B 22 |
147 |
0,39 |
6.35128 |
MK 3 |
J 3 |
135 |
0,31 |
6.35129 |
MK 3 |
J 33 |
129 |
0,31 |
6.35130 |
MK 3 |
J 6 |
129 |
0,31 |
6.35131 |
|
|
|
|
|
|
B 32/3 |
|
|
NEW |
|
|
|
|
|
1800 Watt |
|
|
Three-Speed |
|
|
Drill |
|
|
B 32/3 |
|
|
|
|
Comparative device characteristics |
|
|
Torque |
190 Nm/120 Nm/90 Nm |
|
Drilling capacity in |
|
|
- Steel |
32 mm |
|
- Softwood |
70 mm |
|
No load speed |
170/320/470 /min |
|
Rated input power |
1.800 W |
|
Output power |
1.200 W |
|
Rated load speed |
110/190/280 /min |
|
Collar diameter |
65 mm |
|
Drilling spindle with taper socket |
MK 3 |
|
Weight (without mains cable) |
7,5 kg |
|
Standard equipment |
Chuck key, long side handle |
Reducing sleeves for tools with morse taper
Standard type
Similar to DIN 2185
Ground external taper
Outer |
Inner morse |
Overall length |
Weight |
Order |
morse |
taper Ø |
mm |
kg |
no. |
taper Ø |
|
|
|
|
|
|
|
|
|
MK 3 |
MK 1 |
99 |
0,25 |
6.35140 |
MK 3 |
MK 2 |
112 |
0,19 |
6.35143 |
|
|
|
|
|
Drift key
Suitable for |
Overall length |
Weight |
Order |
machine with |
mm |
kg |
no. |
morse taper |
|
|
|
|
|
|
|
MK 3 |
190 |
0,15 |
6.42396 |
Type |
B 32/3 |
|
Order no. |
6.00323 |
|
|
|
|
100 |
MAGNETIC DRILLING UNITS
EQUIPMENT FEATURES
Magnet base with high holding power for safe operation Also suitable for working overhead on vertical and inclined surfaces using the safety belt provided
Enables precise and clean drilling. Motor and carriage form a unit
Height adjustment of carraige with pinion and toothed rack The motor can only be turned on after turning on
the magnet base
Fatigue-free work by hollow milling Two speeds
Holder bit for chuck (accessory) for working with spiral drill bits
|
|
MAG 832 |
|
|
|
||
|
Electromagnetic |
||
|
Hole Cutting and |
||
|
|
Drilling Unit |
|
|
|
MAG 832 |
|
|
|
|
|
Comparative device characteristics |
|
|
|
Torque |
|
50 Nm/19 Nm |
|
Maximum cutting edge |
|
32 mm |
|
tool diameter |
|
|
|
Magnet stand: |
|
|
|
- Max. stroke |
|
130 mm |
|
- Power consumption |
|
50 W |
|
- Max. adhesive power |
|
8.000 N |
|
- Dimensions of the magnet base |
|
90 x 170 mm |
|
Motor: |
|
|
|
Rated input power |
|
800 W |
|
Output power |
|
450 W |
|
No-load speeds |
530/1.400 /min |
||
Rated load speeds |
|
320/850 /min |
|
Collar diameter |
|
43 mm |
|
Spindle thread |
|
5/8" - 16 UNF |
|
Hole cutting and drilling unit: |
|
|
|
Height (including motor) at |
|
|
|
- Bottommost carriage position |
|
405 mm |
|
- Topmost carriage position |
|
525 mm |
|
Weight |
|
14 kg |
|
Standard equipment |
Tool holder (internal diameter |
||
|
19 mm), 2 hexagon spanners, |
||
|
|
safety belt |
|
|
|
|
|
Type |
|
MAG 832 |
|
Order no. |
6.00832 |
|
|
|
|
|
|
ACCESSORIES FOR THE ELECTROMAGNETIC HOLE
CUTTING AND DRILLING UNIT MAG 832
Cutters
HPHSS
Weldon shank 19 mm
A centring pin is required for working with the cutters.
Diameter |
Cutting depth |
Order |
mm |
mm |
no. |
|
|
|
14 |
25 |
6.30025 |
15 |
25 |
6.30026 |
16 |
25 |
6.30027 |
17 |
25 |
6.30028 |
18 |
25 |
6.30029 |
19 |
25 |
6.30030 |
20 |
25 |
6.30031 |
21 |
25 |
6.30032 |
22 |
25 |
6.30033 |
23 |
25 |
6.30034 |
24 |
25 |
6.30035 |
25 |
25 |
6.30036 |
26 |
25 |
6.30037 |
27 |
25 |
6.30038 |
28 |
25 |
6.30039 |
29 |
25 |
6.30040 |
30 |
25 |
6.30041 |
31 |
25 |
6.30042 |
32 |
25 |
6.30043 |
|
|
|
14 |
50 |
6.30075 |
15 |
50 |
6.30076 |
16 |
50 |
6.30077 |
17 |
50 |
6.30078 |
18 |
50 |
6.30079 |
19 |
50 |
6.30080 |
20 |
50 |
6.30081 |
21 |
50 |
6.30082 |
22 |
50 |
6.30083 |
23 |
50 |
6.30084 |
24 |
50 |
6.30085 |
25 |
50 |
6.30086 |
26 |
50 |
6.30087 |
27 |
50 |
6.30088 |
28 |
50 |
6.30089 |
29 |
50 |
6.30090 |
30 |
50 |
6.30091 |
31 |
50 |
6.30092 |
32 |
50 |
6.30093 |
|
|
|
Centring pins |
|
|
For working with the cutters |
|
|
Suitable for cutting depth up to |
Order |
mm |
no. |
|
|
25 |
6.30054 |
50 |
6.30055 |
|
|
Chuck holder |
|
|
|
|
|
|
Order |
|
no. |
|
|
For chuck with female |
6.30051 |
thread 1/2"-20 UNF |
|
|
|
METAL PROCESORS ANGLE GRINDERS
HAMMERS
IMPACT DRILLS
DRILLS
WOOD SANDING MACHINES SCREWDRIVERS
ROUTERS AND PLANERS
| 101
BENCH DRILLING MACHINES
COMMON FEATURES
For drilling in wood, wood-like materials, plastics and metals Vario Tacho Constamatic (VTC) full-wave electronics Thumbwheel for preselection of speed
Reduced speed for reduced noise during no load Powerful universal motor with high capacity reserve Sturdy steel column
Easy setting of upper part of the machine to the desired height
Solid base plate
Precise preselection of drilling depth Thermal overload protection Undervoltage protection
|
TB E 4512 |
|
|
TB E 5014 |
|
|
|
|
|
||
|
|
Bench Drilling Machine |
Bench Drilling Machine |
||
|
|
Magnum |
Magnum |
||
|
|
TB E 4512 |
TB E 5014 |
||
|
|
|
|
|
|
Comparative device characteristics |
|
|
|
|
|
Drilling capacity in |
|
|
|
|
|
- Steel |
12 mm |
14 mm |
|||
- Aluminium |
20 mm |
25 mm |
|||
- Softwood |
40 mm |
40 mm |
|||
Rated input power |
700 W |
800 W |
|||
Output power |
450 W |
500 W |
|||
No load speed |
500 - 3.000 /min |
400 - 4.500 /min |
|||
Rated load speed |
3.000 /min |
4.500 /min |
|||
Distance, bit centre to column |
200 mm |
205 mm |
|||
Depth of feed |
60 mm |
60 mm |
|||
Column Ø |
60 mm |
60 mm |
|||
Spindle cone |
B 16 |
B 16 |
|||
Chuck capacity |
1 - 13 mm |
1 - 13 mm |
|||
Height to top edge of upper section |
675 mm |
855 mm |
|||
Base plate |
|
|
|
|
|
- Dimensions |
220 x 380 mm |
220 x 380 mm |
|||
- Clamping surface |
220 x 280 mm |
220 x 280 mm |
|||
- Clearance of the T-grooves |
100 mm |
100 mm |
|||
Maximum distance |
|
|
|
|
|
Base plate chuck |
210 mm |
285 mm |
|||
Weight |
28 kg |
50 kg |
|||
Standard equipment |
Quick-action keyless chuck Futuro Top |
Quick-action keyless chuck Futuro Top |
|||
|
|
|
|
|
|
Type |
TB E 4512 |
TB E 5014 |
|||
Order no. |
6.04512 |
6.05014 |
|
||
|
|
|
|
|
|
102 |