Metabo 602197520, 602192520 User Manual

BS 18 LTX BL Impuls BS 18 LTX BL Quick BS 18 LTX Impuls BS 18 LTX Quick

SB 18 LTX BL Impuls SB 18 LTX BL Quick SB 18 LTX Impuls SB 18 LTX Quick

en Operating Instructions 7 fr Mode d'emploi 12

www.metabo.com Made in Germany

es Instrucciones de manejo 17

1 ( 7.8)

3 ( 7.5)2

4 ( 7.4)

6 ( 7.3)

7 ( 7.11)

5 ( 7.6)

8 ( 7.11)

9 ( 7.2)

10 ( 7.1)

11 ( 7.1)

12 ( 7.2)

13 ( 7.6)

14 ( 6.)

15 ( 7.7)

18 V... 3,0 Ah ...6.25594 ... Li-Power Extreme 18 V... 4,0 Ah ...6.25591 ... Li-Power Extreme 18 V... 5,2 Ah ...6.25592 ... Li-Power Extreme

= 50 %

= 100 %

= 75 %

= 25 %

= 50 %

= < 20 %

SC 60 Plus ASC 30-36 ASC 15 ASC 30 etc.

7.1

7.3

7.2

max. Nm

...

1...11

Impuls

...

1...10

Impuls

max. Nm

7.4

7.6

...18 LTX Impuls / Quick,

...18 LTX BL Impuls

...18 LTX BL Quick

7.9

7.11

7.10

7.8

... Quick

12.

*1) Serial Number: 02197..

BS 18 LTX Impuls

UNF

BS 18 LTX BL Quick

*1) Serial Number: 02241..

BS 18 LTX BL Impuls

UV 18

1 max

2 max

3 max

s /min, bpm - - - 38950 38950 32300 32300

m kg (lbs) 1,9 (4.2) 2,0 (4.4) 2,1 (4.6)

GUNF(in)

max

/min, rpm

Nm (in-lbs)

mm (in)

mm (in) 50 (2)

mm (in)

0 - 600 0 - 500 0 - 600 0 - 500

0 - 2050 0 - 1700 0 - 2050 0 - 1700

44 (390) 55 (487) 44 (390) 55 (487)

49 (434) 60 (531) 49 (434) 60 (531)

90 (797) 110 (974) 90 (797) 110 (974)

0,8 - 20

(7 - 177)

0,8 - 8

(7 - 71)

---

1/2“ - 20

UNF

-1/2“ - 20

*1) Serial Number: 02191..

6,5 - 24

(58 - 212)

1,7 - 11

(15 - 97)

65 (2

/16)

BS 18 LTX Quick

*1) Serial Number: 02193..

SB 18 LTX BL Impuls

0,8 - 20 (7 - 177)

0,8 - 8

(7 - 71)

13 (

/2)

- 1/2“ - 20 UNF

/2)

13 (

*1) Serial Number: 02240..

50 (2)

16 (

*1) Serial Number: 02199..

/8)

UNF

SB 18 LTX Impuls

SB 18 LTX BL Quick

- 1/2“ - 20

*1) Serial Number: 02192..

6,5 - 24

(58 - 212)

1,7 - 11

(15 - 97)

65 (2 9/16)

SB 18 LTX Quick

*1) Serial Number: 02200..

Metabowerke GmbH,

Postfach 1229

Metabo-Allee 1

D-72622 Nuertingen

Germany

Operating Instructions

1. Specified Use

The drills and impact drills are suitable for drilling in metal, wood, plastic and similar materials, and also for screwdriving and thread tapping.

The impact drills are also suited for drilling in masonry, brickwork and stone.

The user bears sole responsibility for any damage caused by improper use.

Generally accepted accident prevention regulations and the enclosed safety information must be observed.

2. General safety instructions

For your own protection and for the protection of your electrical tool, pay attention to all parts of the text that are marked with this symbol!

WARNING – Reading the operating instructions will reduce the risk of injury.

Pass on your electrical tool only together with these documents.

General Power Tool Safety Warnings

WARNING – Read all safety warnings and instructions. Failure to follow the warnings

and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference! The term "power tool" in the warnings

refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

2.1 Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power tool. Distractions can cause

you to lose control.

2.2 Electrical safety a) Power tool plugs must match the outlet.

Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching out-

lets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased

risk of electric shock if your body is earthed or grounded.

ENGLISH en

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

2.3 Personal safety a) Stay alert, watch what you are doing and use

common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating

power tools may result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with

your finger on the switch or energising power tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables better control of

the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

2.4 Power tool use and care a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot

be controlled with the switch is dangerous and must be repaired.

ENGLISH en

c) Disconnect the plug from the power source

and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many acci-

dents are caused by poorly maintained power tools. f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool

for operations different from those intended could result in a hazardous situation.

2.5 Battery tool use and care a) Recharge only with the charger specified by

the manufacturer. A charger that is suitable for

one type of battery pack may create a risk of fire when used with another battery pack.

b) Use power tools only with specifically designated battery packs. Use of any other battery

packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals

together may cause burns or a fire.

d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irri-

tation or burns.

2.6 Service a) Have your power tool serviced by a qualified

repair person using only identical replacement parts. This will ensure that the safety of the power

tool is maintained.

3. Special Safety Instructions

Wear ear protectors when impact drilling (machines with the designation SB). Exposure

to noise can cause hearing loss.

Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.

Hold power tool by insulated gripping surfaces, when performing an operation where

the cutting accessory/fastener may contact hidden wiring. Cutting accessory/fasteners

contacting a "live" wire, may make exposed metal parts of the power tool "live" and could give the operator an electric shock.

Ensure that the spot where you wish to work is free of power cables, gas lines or water pipes (e.g. by using a metal detector).

Protect battery packs from water and moisture!

Do not expose battery packs to naked flame!

Do not use faulty or deformed battery packs! Do not open battery packs! Do not touch or short-circuit battery packs!

Slightly acidic, flammable fluid may leak from defective li-ion battery packs!

If battery fluid leaks out and comes into contact with your skin, rinse immediately

with plenty of water. If battery fluid leaks out and comes into contact with your eyes, wash them with clean water and seek medical attention immediately.

Remove the battery pack from the machine before any adjustments, conversions or servicing are performed.

Before fitting the battery pack, make sure that the machine is switched off.

Dust from material such as paint containing lead, some wood species, minerals and metal may be harmful. Contact with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to the operator or bystanders. Certain kinds of dust are classified as carcinogenic, such as oak and beech dust, especially in conjunction with additives for wood conditioning (chromate, wood preservative). Material containing asbestos must only be treated by specialists.

- Use a dust extraction device where possible.

- The work place must be well ventilated.

- The use of a dust mask of filter class P2 is recom-

mended. Follow national requirements for the materials you want to work with. Secure the workpiece against slipping, e.g. with the help of clamping devices.

LED lights (14): Do not observe the LED radiation directly with optical instruments.

4. Symbols

V .............volts

........direct current

0................

../min ......revolutions per minute

rpm .........revolutions per minute

rated speed

+ 16 hidden pages