MET MTYH310 User Manual

Download

Page 1

37˝ HD Sound Bar

User’s Guide

For the most up-to-date version of this User’s Guide, go to: www.iLiveElectronics.com

with

Bluetooth Wireless

Page 2

Safety Instructions & Warnings

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION

RISQUE D' ÉLECTROCUTION

NE PAS OUVRIR

WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing

to qualied service personnel.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The lightning ash with arrowhead symbol,

within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufcient magnitude

to constitute a risk of electric shock to persons.

This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts.

WARNING: DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD.

WARNING : This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings. ca.gov. This product meets and complies

with all Federal regulations.

Important Safety Instructions

• Read these Instructions.

• Keep these Instructions.

• Heed all Warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. e wide blade or the third prong are provided for your safety. When the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specied by the manufacturer.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all ser vicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Page 3

FCC Warnings

Warning: Changes or modications to this unit not expressly

approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Additional Warnings and Precautions

• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

• Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely.

• WARNING: Shock hazard - Do Not Open.

• Caution and marking information is located at the rear or bottom of the apparatus.

• WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.

• Objects lled with liquids, such as vases, shall not be placed on the apparatus.

• CAUTION: Use of controls or adjustments or performance

of procedures other than those specied may result in

hazardous radiation exposure.

• WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

• WARNING: Do not place this unit directly onto furniture

surfaces with any type of soft, porous, or sensitive nish.

As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining.

• WARNING: Use of this unit near uorescent lighting may cause interference regarding use of the remote. If the unit is

displaying erratic behavior move away from any uorescent

lighting, as it may be the cause.

• CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

• Battery shall not be exposed to excessive heat such as

sunshine, re or the like.

• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.

• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

• Do not mix old and new batteries.

• Completely replace all old batteries with new ones.

• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.

• Batteries should be recycled or disposed of as per state and local guidelines.

This device complies with part 15 of the FCC Rule Operation is subject to the following two (1) This device may not cause harmful interference, and (2) this device must accept any

including

interference that may cause

interference received,

conditions:

undesired operation.

Page 4

Table of Contents

Setup

Features & Specications - 5 Power - 5 Remote Battery - 5 Includes - 5

Orientation

Top View - 6 Speaker Controls Detail (Top) - 6 Source Mode Indicator LED - 6 Rear View - 7 Speaker Inputs Detail (Rear) - 7

Remote

Functions & Controls - 8

Connecting Devices

Initial Bluetooth Connection and Playing Audio - 9 Previously Connected Devices - 9 Troubleshooting - 9 Stereo RCA Inputs (Aux In) & Coaxial Audio Input - 10 Line In - 10 Optical Input - 11

Company Information

Contact Information - 12 International Support - 12 Warranty - 12

Page 5

Setup

Features & Specifications

• 37" length

• Supports Bluetooth: range 60 ft.

• 2 channel stereo sound

• Digital volume control

• Optical audio input

• Aux In (3.5mm audio input)

• RCA stereo audio inputs

Power

Plug the power cord into the DC Input on the back of the speaker and a standard wall outlet.

Includes

• Full-function remote control with 1 CR2025 battery pre-installed

• Optical audio cable

• AC/DC power adapter

• Wall-mount hardware and instructions

Remote Battery

Remote control: requires 1 CR2025 button cell type battery (pre-installed).

Page 6

OPTICAL IN

POWER/

AUX IN LINE IN

Orientation

Top View

Source Indicator LED (front)

Speaker Controls Detail (Top)

Controls

POWER/

AUX IN LINE IN

OPTICAL IN

Press to power the unit

ON or OFF.

Source Mode Indicator LED

STATUS INDICATOR LIGHT

Power Off Red Light

Bluetooth Standby/Pairing Slow/Quick Flashing Blue Light

Bluetooth Connected Solid Blue Light

Optical Mode Orange Light

Aux In (RCA) Mode White Light

Line In Mode Green Light

Press to switch audio

source to Bluetooth,

Optical, Aux In, or Line In

modes.

Press to begin pairing to

a Bluetooth device.

Press to adjust volume.

Page 7

Rear View

Speaker Inputs Detail (Rear)

Wall Mount Pegs

Speaker

Inputs

Optical InputDC Power Input

Line In

(3.5mm audio input)

Stereo RCA Audio

Inputs (AUX IN)

Page 8

Remote

Functions & Controls

Power

Press to turn the

unit ON or OFF.

Press to switch to

Bluetooth Mode.

Optical

Press to switch

to Optical mode.

AUX

Press to switch to

Aux In (RCA) Mode.

Line In

Press to switch to

Line In mode.

Treble/Bass

Press to adjust

the treble and

bass settings.

Mute Press to mute the volume.

Skip Back/Fwd In Bluetooth mode, press to skip the selected track.

Pair/Play/Pause In Bluetooth mode, press and hold to pair. Press to play or pause audio.

Music/Movie/Dialog

Press to change the equalizer mode.

Volume Press to adjust the volume.

Page 9

Connecting Devices

Initial Bluetooth Connection and Playing Audio

1. Power on the sound bar by pressing the button. A voice will say, "Bluetooth," and the LED indicator will slowly flash blue. When pairing, remain within 3 feet of the Bluetooth device.

2. Using the controls on your Bluetooth device, select in the Bluetooth Settings to pair. If need be, refer to the user’s manual for your specific device for more information.

3. When successfully paired, a voice will announce, “Bluetooth is connected,” and the LED indicator will turn solid blue. Audio from the connected Bluetooth device will now be heard through the speaker.

4. Use the controls on the connected Bluetooth device to select and play audio. Use the speaker controls or the connected Bluetooth device to play, pause, and adjust the volume level.

After initial pairing, when the speaker powers ON, it will automatically attempt to connect to the last Bluetooth device used. If your device should become unpaired or you find it is unable to connect, press & hold the Pairing Mode. A voice will announce “Bluetooth is connecting” and you can connect to the speaker manually.

Note: This sound bar has last function memory after powering OFF. It will resume the last source mode when powering ON again. Remember to press the

button to switch it to Bluetooth mode before connecting a device.

MET310

button to enter to

Page 10

Connecting Devices

Stereo RCA Inputs (Aux In) & Coaxial Audio Input

Requires an RCA stereo audio cable (not included). When connecting the audio cables, match them to their corresponding color coded ports (red/white).

1. Connect an RCA stereo audio cable to the Aux In ports on the sound bar and the RCA audio outputs on a television or other audio source.

2. Power ON the sound bar and press Source on the sound bar or Aux In on the remote to select Aux In Mode. A voice will announce the source mode and the indicator will turn white for Aux In.

3. Audio played through the television or other source should now be heard through the speakers.

Connect RCA audio cable (not

included) to audio source

Line In

Requires a 3.5mm audio cable (not included).

1. Connect a 3.5mm audio cable to the Line In on the unit and the audio output/headphone jack on an audio device.

2. Power ON the sound bar and press Source on the sound bar or Line In on the remote to select Line In Mode. A voice will announce the source mode and the indicator will turn green.

3. Use the controls on the connected device to select and play audio. Be sure the volume on your connected device is audible when you begin playing.

Connect 3.5mm audio cable

(not included) to audio source

Page 11

Optical Input

Requires an audio source with an Optical Audio Output and a Digital Optical Audio Cable (included).

1. Using a Digital Optical Audio Cable, connect the Optical Input on the sound bar to the Optical Output on your audio source (TV, amplifier, etc.).

2. Power ON the sound bar and press Optical on the remote or Source on the sound bar to select Optical Mode. A voice will announce the source mode and the indicator will turn orange.

3. On the connected audio source (TV, amplifier, etc.), be sure the audio settings are set to PCM or Optical Audio.

4. Audio played through the connected audio source (TV, amplifier, etc.) should now be heard through the speaker.

Important tips for optical audio:

• Use the correct optical audio cable and make sure that it is firmly seated in both source and sound bar sockets.

• Optical audio output is activated from the audio source (a red light should be visible from the optical socket). It may be labeled SPDIF in the settings menu of the source.

• The optical output source should be set to output PCM and not Dolby Digital.

Connect optical audio cable

(included) to audio source

Page 12

Sustain for Tomorrow

MET MTYH310 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual