Messoa SCR367 Instruction Manual

1

Please read this manual thoroughly before use, and keep it handy for future reference

IR Bullet Camera

1. Overview

FEATURES

1. Color: 1/3" SONY CCD Camera with 700
TV lines of high resolution.

2. Easy to install and adjust.

3. Minimum illumination:
IR LED OFF:0.03lux (F1.4, AGC on, 50 IRE)
IR LED ON: 0lux

4. All-in-one function excellent for both indoor &
outdoor applications.

5. Water proof of IP66 makes it ideal for outdoor
surveillance applications.

6. Externally adjustable focal length & focus

7. ICR removable design for keeping Day & Night
performance

8. Good cable management for waterproof

CAUTIONS

1. Do not touch the lens surface of the sensor.
Use soft cloth moistened with alcohol to clean
the surface if it is accidentally touched .

2. Ensure the supply voltage is correct as

specied before operation.

3. Do not expose the camera to rain, moisture or
to the temperature which exceeds the specied
limit, without a suitable housing.

4. Avoid aiming the camera at very bright objects
such as the sun or electric lights for an
extended period.

5. Only service this unit personally with
authorization.Opening or removing cover may
expose yourself to the dangerous voltage or
other hazards.

1. Camera main body

2. Sun shield

3. Externally adjustable focal length & focus

4. OSD menu joystick

5. Mount bracket

6. BNC connector

Connects to the VIDEO IN connector of the Monitor Video Connector

7. Power connector

Connects to the external power source.
DC12V/AC24V (Please refer to camera label)

CONNECTIONS

Connects the BNC connector and the power connector to the respective

connectors.

ZEIM-4000508G 367 A.2

Instruction

Manual

NAMES OF THE PARTS AND FUNCTIONS















2

IR Bullet Camera

INSTRUCTION MANUAL

2. INSTALLATION

Appearance

Step 1: Afx the camera

Afx the instruction label to the desired

location, knock in 3 plastic anchors after
hole drilling and then lock in 3 self­tapping screws to fasten the camera.

If it would be installed on the metal pillar
without grounding out, please use the
rubber pad enclosed for isolation. (You
could select to use enclosed washer for
better isolation.)

Step 2: Modify the position of camera

Loosen the two screws (left and right)

rst (just rotate slightly one circle or the

screws will fall down), second, rotate
the Retaining ring then you will be able
to hold the camera and adjust its angle.
Fasten the screws and retaining ring to
ensure the desired angle.

Camera Position Screw

Retaining Ring

Step 3: Adjust the lens

Loosen the screws and make the Far/
Near and Tele/Wide adjustments. After
adjustments, make sure to tighten the
screws to keep the camera waterproof.
It’s suggested to manually tighten the
screws. If using an electric screwdriver, a
torque of 5~8 kgf-cm is suggested.





1. Lens adjustment control, Near & Far

2. Lens adjustment control, Tele & Wide

Notic e: Pl ease be ca reful when adju sting Tele /
Wide and Near/Far so as to avoid damage to the
lens

Step 4: Adjust OSD Settings

To use the OSD joystick control:

• Press the OSD joystick control
straight down to enter the Main menu
or a selected item.

• Move the OSD joystick control UP,
DOWN, LEFT and RIGHT to navigate
through menus and options.

For further information on OSD settings,
refere to next section.

Step 5: Adjust the sun shield hood

Loosen the screws (one circle), then move
the sunshield hood forward and backward
to adjust the angle of sunshade. Be
sure to adjust the sunshield hood in
coordination with lens in case of sunshade
problems.

3

IR Bullet Camera

INSTRUCTION MANUAL

3. OSD Settings

Use the OSD menu to set up the camera
for optimum performance.

LENS AUTO
SHUTTER/AGC AUTO
WHITE BAL ATW
BACKLIGHT OFF
PICT ADJUST
ATR OFF
MOTION DET OFF
NEXT
EXIT SAVE ALL

PRIVACY OFF
DAY/NIGHT AUTO
NR
CAMERA ID OFF
SYNC INT
LANGUAGE ENGLISH
CAMERA RESET
BACK
EXIT SAVE ALL

OSD Main Menu

3.1 Lens

The LENS settings allows you to congure

Lens and brightness. Options are AUTO

(Auto Iris lens) and MANUAL. The default

setting is AUTO.

In the AUTO submenu, you can set the
MODE as OPEN, CLOSE or AUTO. Then
select SPEED to adjust the DC Iris Lens
convergence speed.

TYPE DC
MODE OPEN
SPEED 046

3.2 SHUTTER/AGC

You can set the SHUTTER/AGC as AUTO or
MANUAL. The default setting is AUTO.

When LENS is set to AUTO: It is
recommended to set SHUTTER/AGC to
AUTO mode. In the AUTO submenu, adjust
HIGH LUMINANCE MODE mode according
to your application:

•

AUTO IRIS mode: Use this
for normal condition application
environments. The IRIS level will be
controlled by camera brightness.

•

SHUT+AUTO IRIS mode: Use
this for high light application
environments. The exposure will be
controlled by AES or the DC Iris. The
iris level will be controlled by camera
brightness.

HIGH LUMINANCE
MODE AUTO IRIS
BRIGHTNESS 024

LOW LUMINANCE
MODE AGC
BRIGHTNESS x0.25

If SHUTTER/AGC is set to MANUAL, the
submenu is shown as below. The shutter
speed is a variable from 1/50(1/60)sec
to 1/10000sec and the AGC is selectable
depending on your environment condition.

MODE OFF
SHUTTER 1/50(1/60)
AGC 6.0

3.3 WHITE BAL

WHITE BALANCE controls color on the
screen. Options include ATW (Auto White
Balance), PUSH, PUSH LOCK, USER1,
USER2, ANTI CR (Anti Color Rolling
Suppression) and MANUAL. The default is
ATW.

•

ATW: Select ATW when the scene
illumination varies between indoor

scenes and outdoor scene lighting.

SPEED 171
DELAY CNT 152
ATW FRAME X0.50
ENVIRONMENT INDOOR

•

MANUAL: You can manually adjust
the LEVEL from 15 to 69.

•

USER1/USER2: You can adjust blue
setting (B-GAIN) and red setting
(R-GAIN) value from 0 to 255.

•

PUSH: When selected in the
appropriate position, the whole area
will perform white balance.

•

PUSH LOCK: When selected in the
appropriate position, WHITE BALANCE
will perform once.

3.4 BACKLIGHT

Set Backlight compensation function.
It controls the light level to overcome
sever backlight conditions. Available
options include OFF, BLC or HLC (Highlight
Compensation) mode. The default is OFF.

If HLC is selected, HLC is activated
automatically when the camera detects
high-luminance.

3.5 PICT ADJUST

PICTURE ADJUST allows you to adjust
pictuer settings for optimal image. In the
PICT ADJUST subment, you can adjust
BRIGHTNESS, CONTRAST, SHARPNESS,
HUE and GAIN value. In addition, you can

set MIRROR to ON to reect the image.

MIRROR OFF
BRIGHTNESS 000
CONTRAST 128
SHARPNESS 128
HUE 128
GAIN 128

3.6 ATR*

Set ATR (Adaptive Tone-curve
Reproduction) function. You can select ON
or OFF. The default is OFF. If selecting ON,
you will enter the ATR submenu, where
you can set LUMINACE and CONTRAST to
optimize by image.

LUMINANCE LOW
CONTRAST LOW

*Also known as Wide Dynamic Range.
This function expands the video dynamic
range of the camera and improves
visibility of images even in high contrast
environments.

3.7 MOTION DET

MOTION DET allows to detect moving
objects on the screen. The default is OFF.
If selecting ON, you will enter the MOTION
DET submenu. You can set up to 4 motion
areas to detect moving objectives and
adjust the motion detection sensitivity
from 0 to 127.

3.8 PRIVACY

PRIVACY function mask up to 8
privacy areas on the screen from video
monitoring. The default setting is OFF.
If selecting ON, you will enter the

PRIVACY submenu. You can congure

up to 8 privacy areas and set color and

transparency of the privacy zones. In
addition, you can enable MOISAIC function
for the privacy zone.

Note: If you enable MOTION DET
function, then PRIVACY function will
support 4 zones only.

REA SEL 1/8
TOP 000
BOTTOM 000
LEFT 000
RIGHT 000
COLOR 1
TRANSP 0.00
MOSAIC OFF

3.9 DAY/NIGHT

The camera will automatically switch to
B/W mode when the illumination is under
a certain threshold. There is no need to
adjust this setting.

Under B/W mode, you can set BURST to
be ON or OFF.

4

IR Bullet Camera

INSTRUCTION MANUAL

Specications

Signal System NTSC PAL

Image System

Image Pickup Device 1/3” SONY Exview HAD CCD II

Effective Pixels (HxV) 976 (H) × 494 (V) 976 (H) × 582 (V)

Electric

Scanning System 2:1 Interlace V: 59.94 Hz , H: 15.734KHz 2:1 Interlace V: 50 Hz , H: 15.625 KHz

Sync System Internal/Linelock

Horizontal Resolution 700 TV lines

Bulit-in Lens

f=3.3mm~12mm,F1.4 DC iris varifocal IR-corrected lens

External adjustments (zoom and focus)

View Angle

Horizontal:89.8°(wide)~23.9°(tele)

Vertical:63.6°(wide)~17.9°(tele)

Gamma Correction 0.45

Minimum Illumination

F1.4 color mode : 0.03 lux@50IRE, 0.015 lux@30IRE,

B/W mode : 0.015 lux@50IRE, 0.0075 lux@30IRE,

IR LED ON:0 lux

S/N Ratio More than 50dB (AGC off)

Iris Control DC

Gain Control On / Off (selectable)

White Balance ATW/ Manual/ User/ Push/ Push lock

Electric shutter 1/60 sec 1/50 sec

Flickeless On / Off (selectable)

BLC Off/ BLC/ HLC (High Light compensation) (selectable)

Day/Night Mode Mechanical (ICR) D/N(Auto/Color/Forced to BW)

DNR Yes

Motion Detection Yes, 4 areas (max)

Privacy Mask Yes, 8 zones (max)

OSD Yes

Hight Light Compensation Yes

ATR* On / Off (selectable)

Multi Language English, Japanese, German, French, Russia, Portuguese, Spanish, Simplied Chinese

Video Output 1Vpp composite output, 75 ohm

IR LED Super power LED 28pcs

IR Wavelength 850nm

IR Distance 35M (115ft)

IR Turn On Status Under 10 lux by photocell auto controlled

LED Life More than 10,000 hours(50°C)

Power Supply

Power Requirement DC 12V & AC 24V ± 10%

Power Consumption 7W (max)

Environment

Operating Temperature -10°C ~ 50°C

Operating Humidity 90% MAX

Storage Temperature -20°C ~ 60°C

Storage Humidity 70% MAX

Mechanism

Case Material Metal

Dimension(ΦxH) Φ82.9mm x 87mm x 205.5mm (3.26”x3.43”x8.09”)

Weight 610g (1.36 lb) approx.

Construction

Sunshield;Cable management bracket

Compact die-cast aluminum;Tempered Glass

Protection Class IP66

*Also known as WDR

3.10 NR

NR allows you to congure the DNR

(Digital Noise Reduction) settings to
reduce noise on the screen. In the NR
submenu, you can enable the NR MODE
to the Y (BRIGHT) / C (COLOR), C LEVEL
or Y LEVEL mode. According to your
NR mode, you can adjust Y LEVEL or C

LEVEL as required.

NR MODE Y/C
Y LEVEL 000
C LEVEL 000

Note: When the Y/C Level is higher, the
noise in dark areas become lessened.
Also, resolution will become lower. When
it is lower, there are more noise in dark
areas.

3.11 CAMERA ID

CAMERA ID allow you to speicfy camera
ID. Options are OFF (default) and ON. In
the ON submenu, you can add a camera
title up to 26 characters with 2 lines and
also select where the title appears on
the monitor screen.

3.12 SYNC

Set the sync mode as INT (internal, the
default) or LL (line lock) mode. The LL
option only works with AC power.

3.13 LANGUAGE

OSD supports 8 multiple languages.
Options include ENGLISH (default),
JAPANESE, GERMAN, FRENCH,
RUSSIAN, PORTUGUESE, SPANISH and
SIMPLIFIED CHINESE.

3.14 CAMERA RESET

To restore factory defaults, select
CAMERA RESET and then press the
joystick control.

3.15 SAVE ALL

SAVE ALL item allows you to save all
settings and exit the OSD menu.